mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
e7dcf5645f
This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
797 lines
25 KiB
C
797 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2008
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author :
|
|
* Manikandan Pillai <mani.pillai@ti.com>
|
|
*
|
|
* Derived from Beagle Board and OMAP3 SDP code by
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <khasim@ti.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/clocks_omap3.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <command.h>
|
|
|
|
/******************************************************************************
|
|
* get_sys_clk_speed() - determine reference oscillator speed
|
|
* based on known 32kHz clock and gptimer.
|
|
*****************************************************************************/
|
|
u32 get_osc_clk_speed(void)
|
|
{
|
|
u32 start, cstart, cend, cdiff, cdiv, val;
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
struct prm *prm_base = (struct prm *)PRM_BASE;
|
|
struct gptimer *gpt1_base = (struct gptimer *)OMAP34XX_GPT1;
|
|
struct s32ktimer *s32k_base = (struct s32ktimer *)SYNC_32KTIMER_BASE;
|
|
|
|
val = readl(&prm_base->clksrc_ctrl);
|
|
|
|
if (val & SYSCLKDIV_2)
|
|
cdiv = 2;
|
|
else
|
|
cdiv = 1;
|
|
|
|
/* enable timer2 */
|
|
val = readl(&prcm_base->clksel_wkup) | CLKSEL_GPT1;
|
|
|
|
/* select sys_clk for GPT1 */
|
|
writel(val, &prcm_base->clksel_wkup);
|
|
|
|
/* Enable I and F Clocks for GPT1 */
|
|
val = readl(&prcm_base->iclken_wkup) | EN_GPT1 | EN_32KSYNC;
|
|
writel(val, &prcm_base->iclken_wkup);
|
|
|
|
val = readl(&prcm_base->fclken_wkup) | EN_GPT1;
|
|
writel(val, &prcm_base->fclken_wkup);
|
|
|
|
writel(0, &gpt1_base->tldr); /* start counting at 0 */
|
|
writel(GPT_EN, &gpt1_base->tclr); /* enable clock */
|
|
|
|
/* enable 32kHz source, determine sys_clk via gauging */
|
|
|
|
/* start time in 20 cycles */
|
|
start = 20 + readl(&s32k_base->s32k_cr);
|
|
|
|
/* dead loop till start time */
|
|
while (readl(&s32k_base->s32k_cr) < start);
|
|
|
|
/* get start sys_clk count */
|
|
cstart = readl(&gpt1_base->tcrr);
|
|
|
|
/* wait for 40 cycles */
|
|
while (readl(&s32k_base->s32k_cr) < (start + 20)) ;
|
|
cend = readl(&gpt1_base->tcrr); /* get end sys_clk count */
|
|
cdiff = cend - cstart; /* get elapsed ticks */
|
|
cdiff *= cdiv;
|
|
|
|
/* based on number of ticks assign speed */
|
|
if (cdiff > 19000)
|
|
return S38_4M;
|
|
else if (cdiff > 15200)
|
|
return S26M;
|
|
else if (cdiff > 13000)
|
|
return S24M;
|
|
else if (cdiff > 9000)
|
|
return S19_2M;
|
|
else if (cdiff > 7600)
|
|
return S13M;
|
|
else
|
|
return S12M;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* get_sys_clkin_sel() - returns the sys_clkin_sel field value based on
|
|
* input oscillator clock frequency.
|
|
*****************************************************************************/
|
|
void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
|
|
{
|
|
switch(osc_clk) {
|
|
case S38_4M:
|
|
*sys_clkin_sel = 4;
|
|
break;
|
|
case S26M:
|
|
*sys_clkin_sel = 3;
|
|
break;
|
|
case S19_2M:
|
|
*sys_clkin_sel = 2;
|
|
break;
|
|
case S13M:
|
|
*sys_clkin_sel = 1;
|
|
break;
|
|
case S12M:
|
|
default:
|
|
*sys_clkin_sel = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* OMAP34XX/35XX specific functions
|
|
*/
|
|
|
|
static void dpll3_init_34xx(u32 sil_index, u32 clk_index)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
dpll_param *ptr = (dpll_param *) get_core_dpll_param();
|
|
void (*f_lock_pll) (u32, u32, u32, u32);
|
|
int xip_safe, p0, p1, p2, p3;
|
|
|
|
xip_safe = is_running_in_sram();
|
|
|
|
/* Moving to the right sysclk and ES rev base */
|
|
ptr = ptr + (3 * clk_index) + sil_index;
|
|
|
|
if (xip_safe) {
|
|
/*
|
|
* CORE DPLL
|
|
*/
|
|
clrsetbits_le32(&prcm_base->clken_pll,
|
|
0x00000007, PLL_FAST_RELOCK_BYPASS);
|
|
wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen,
|
|
LDELAY);
|
|
|
|
/*
|
|
* For OMAP3 ES1.0 Errata 1.50, default value directly doesn't
|
|
* work. write another value and then default value.
|
|
*/
|
|
|
|
/* CM_CLKSEL1_EMU[DIV_DPLL3] */
|
|
clrsetbits_le32(&prcm_base->clksel1_emu,
|
|
0x001F0000, (CORE_M3X2 + 1) << 16) ;
|
|
clrsetbits_le32(&prcm_base->clksel1_emu,
|
|
0x001F0000, CORE_M3X2 << 16);
|
|
|
|
/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll,
|
|
0xF8000000, ptr->m2 << 27);
|
|
|
|
/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll,
|
|
0x07FF0000, ptr->m << 16);
|
|
|
|
/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll,
|
|
0x00007F00, ptr->n << 8);
|
|
|
|
/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
|
|
clrbits_le32(&prcm_base->clksel1_pll, 0x00000040);
|
|
|
|
/* SSI */
|
|
clrsetbits_le32(&prcm_base->clksel_core,
|
|
0x00000F00, CORE_SSI_DIV << 8);
|
|
/* FSUSB */
|
|
clrsetbits_le32(&prcm_base->clksel_core,
|
|
0x00000030, CORE_FUSB_DIV << 4);
|
|
/* L4 */
|
|
clrsetbits_le32(&prcm_base->clksel_core,
|
|
0x0000000C, CORE_L4_DIV << 2);
|
|
/* L3 */
|
|
clrsetbits_le32(&prcm_base->clksel_core,
|
|
0x00000003, CORE_L3_DIV);
|
|
/* GFX */
|
|
clrsetbits_le32(&prcm_base->clksel_gfx,
|
|
0x00000007, GFX_DIV);
|
|
/* RESET MGR */
|
|
clrsetbits_le32(&prcm_base->clksel_wkup,
|
|
0x00000006, WKUP_RSM << 1);
|
|
/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
|
|
clrsetbits_le32(&prcm_base->clken_pll,
|
|
0x000000F0, ptr->fsel << 4);
|
|
/* LOCK MODE */
|
|
clrsetbits_le32(&prcm_base->clken_pll,
|
|
0x00000007, PLL_LOCK);
|
|
|
|
wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen,
|
|
LDELAY);
|
|
} else if (is_running_in_flash()) {
|
|
/*
|
|
* if running from flash, jump to small relocated code
|
|
* area in SRAM.
|
|
*/
|
|
f_lock_pll = (void *) (SRAM_CLK_CODE);
|
|
|
|
p0 = readl(&prcm_base->clken_pll);
|
|
clrsetbits_le32(&p0, 0x00000007, PLL_FAST_RELOCK_BYPASS);
|
|
/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
|
|
clrsetbits_le32(&p0, 0x000000F0, ptr->fsel << 4);
|
|
|
|
p1 = readl(&prcm_base->clksel1_pll);
|
|
/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
|
|
clrsetbits_le32(&p1, 0xF8000000, ptr->m2 << 27);
|
|
/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
|
|
clrsetbits_le32(&p1, 0x07FF0000, ptr->m << 16);
|
|
/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
|
|
clrsetbits_le32(&p1, 0x00007F00, ptr->n << 8);
|
|
/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
|
|
clrbits_le32(&p1, 0x00000040);
|
|
|
|
p2 = readl(&prcm_base->clksel_core);
|
|
/* SSI */
|
|
clrsetbits_le32(&p2, 0x00000F00, CORE_SSI_DIV << 8);
|
|
/* FSUSB */
|
|
clrsetbits_le32(&p2, 0x00000030, CORE_FUSB_DIV << 4);
|
|
/* L4 */
|
|
clrsetbits_le32(&p2, 0x0000000C, CORE_L4_DIV << 2);
|
|
/* L3 */
|
|
clrsetbits_le32(&p2, 0x00000003, CORE_L3_DIV);
|
|
|
|
p3 = (u32)&prcm_base->idlest_ckgen;
|
|
|
|
(*f_lock_pll) (p0, p1, p2, p3);
|
|
}
|
|
}
|
|
|
|
static void dpll4_init_34xx(u32 sil_index, u32 clk_index)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
dpll_param *ptr = (dpll_param *) get_per_dpll_param();
|
|
|
|
/* Moving it to the right sysclk base */
|
|
ptr = ptr + clk_index;
|
|
|
|
/* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */
|
|
clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_STOP << 16);
|
|
wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
|
|
|
|
/*
|
|
* Errata 1.50 Workaround for OMAP3 ES1.0 only
|
|
* If using default divisors, write default divisor + 1
|
|
* and then the actual divisor value
|
|
*/
|
|
/* M6 */
|
|
clrsetbits_le32(&prcm_base->clksel1_emu,
|
|
0x1F000000, (PER_M6X2 + 1) << 24);
|
|
clrsetbits_le32(&prcm_base->clksel1_emu,
|
|
0x1F000000, PER_M6X2 << 24);
|
|
/* M5 */
|
|
clrsetbits_le32(&prcm_base->clksel_cam, 0x0000001F, (PER_M5X2 + 1));
|
|
clrsetbits_le32(&prcm_base->clksel_cam, 0x0000001F, PER_M5X2);
|
|
/* M4 */
|
|
clrsetbits_le32(&prcm_base->clksel_dss, 0x0000001F, (PER_M4X2 + 1));
|
|
clrsetbits_le32(&prcm_base->clksel_dss, 0x0000001F, PER_M4X2);
|
|
/* M3 */
|
|
clrsetbits_le32(&prcm_base->clksel_dss,
|
|
0x00001F00, (PER_M3X2 + 1) << 8);
|
|
clrsetbits_le32(&prcm_base->clksel_dss,
|
|
0x00001F00, PER_M3X2 << 8);
|
|
/* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */
|
|
clrsetbits_le32(&prcm_base->clksel3_pll, 0x0000001F, (ptr->m2 + 1));
|
|
clrsetbits_le32(&prcm_base->clksel3_pll, 0x0000001F, ptr->m2);
|
|
/* Workaround end */
|
|
|
|
/* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:18] */
|
|
clrsetbits_le32(&prcm_base->clksel2_pll,
|
|
0x0007FF00, ptr->m << 8);
|
|
|
|
/* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
|
|
clrsetbits_le32(&prcm_base->clksel2_pll, 0x0000007F, ptr->n);
|
|
|
|
/* FREQSEL (PERIPH_DPLL_FREQSEL): CM_CLKEN_PLL[20:23] */
|
|
clrsetbits_le32(&prcm_base->clken_pll, 0x00F00000, ptr->fsel << 20);
|
|
|
|
/* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
|
|
clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_LOCK << 16);
|
|
wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY);
|
|
}
|
|
|
|
static void dpll5_init_34xx(u32 sil_index, u32 clk_index)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
dpll_param *ptr = (dpll_param *) get_per2_dpll_param();
|
|
|
|
/* Moving it to the right sysclk base */
|
|
ptr = ptr + clk_index;
|
|
|
|
/* PER2 DPLL (DPLL5) */
|
|
clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_STOP);
|
|
wait_on_value(1, 0, &prcm_base->idlest2_ckgen, LDELAY);
|
|
/* set M2 (usbtll_fck) */
|
|
clrsetbits_le32(&prcm_base->clksel5_pll, 0x0000001F, ptr->m2);
|
|
/* set m (11-bit multiplier) */
|
|
clrsetbits_le32(&prcm_base->clksel4_pll, 0x0007FF00, ptr->m << 8);
|
|
/* set n (7-bit divider)*/
|
|
clrsetbits_le32(&prcm_base->clksel4_pll, 0x0000007F, ptr->n);
|
|
/* FREQSEL */
|
|
clrsetbits_le32(&prcm_base->clken_pll, 0x000000F0, ptr->fsel << 4);
|
|
/* lock mode */
|
|
clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_LOCK);
|
|
wait_on_value(1, 1, &prcm_base->idlest2_ckgen, LDELAY);
|
|
}
|
|
|
|
static void mpu_init_34xx(u32 sil_index, u32 clk_index)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
dpll_param *ptr = (dpll_param *) get_mpu_dpll_param();
|
|
|
|
/* Moving to the right sysclk and ES rev base */
|
|
ptr = ptr + (3 * clk_index) + sil_index;
|
|
|
|
/* MPU DPLL (unlocked already) */
|
|
|
|
/* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
|
|
clrsetbits_le32(&prcm_base->clksel2_pll_mpu,
|
|
0x0000001F, ptr->m2);
|
|
|
|
/* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll_mpu,
|
|
0x0007FF00, ptr->m << 8);
|
|
|
|
/* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll_mpu,
|
|
0x0000007F, ptr->n);
|
|
|
|
/* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */
|
|
clrsetbits_le32(&prcm_base->clken_pll_mpu,
|
|
0x000000F0, ptr->fsel << 4);
|
|
}
|
|
|
|
static void iva_init_34xx(u32 sil_index, u32 clk_index)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
dpll_param *ptr = (dpll_param *) get_iva_dpll_param();
|
|
|
|
/* Moving to the right sysclk and ES rev base */
|
|
ptr = ptr + (3 * clk_index) + sil_index;
|
|
|
|
/* IVA DPLL */
|
|
/* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
|
|
clrsetbits_le32(&prcm_base->clken_pll_iva2,
|
|
0x00000007, PLL_STOP);
|
|
wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY);
|
|
|
|
/* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
|
|
clrsetbits_le32(&prcm_base->clksel2_pll_iva2,
|
|
0x0000001F, ptr->m2);
|
|
|
|
/* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll_iva2,
|
|
0x0007FF00, ptr->m << 8);
|
|
|
|
/* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll_iva2,
|
|
0x0000007F, ptr->n);
|
|
|
|
/* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */
|
|
clrsetbits_le32(&prcm_base->clken_pll_iva2,
|
|
0x000000F0, ptr->fsel << 4);
|
|
|
|
/* LOCK MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
|
|
clrsetbits_le32(&prcm_base->clken_pll_iva2,
|
|
0x00000007, PLL_LOCK);
|
|
|
|
wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY);
|
|
}
|
|
|
|
/*
|
|
* OMAP3630 specific functions
|
|
*/
|
|
|
|
static void dpll3_init_36xx(u32 sil_index, u32 clk_index)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
dpll_param *ptr = (dpll_param *) get_36x_core_dpll_param();
|
|
void (*f_lock_pll) (u32, u32, u32, u32);
|
|
int xip_safe, p0, p1, p2, p3;
|
|
|
|
xip_safe = is_running_in_sram();
|
|
|
|
/* Moving it to the right sysclk base */
|
|
ptr += clk_index;
|
|
|
|
if (xip_safe) {
|
|
/* CORE DPLL */
|
|
|
|
/* Select relock bypass: CM_CLKEN_PLL[0:2] */
|
|
clrsetbits_le32(&prcm_base->clken_pll,
|
|
0x00000007, PLL_FAST_RELOCK_BYPASS);
|
|
wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen,
|
|
LDELAY);
|
|
|
|
/* CM_CLKSEL1_EMU[DIV_DPLL3] */
|
|
clrsetbits_le32(&prcm_base->clksel1_emu,
|
|
0x001F0000, CORE_M3X2 << 16);
|
|
|
|
/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll,
|
|
0xF8000000, ptr->m2 << 27);
|
|
|
|
/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll,
|
|
0x07FF0000, ptr->m << 16);
|
|
|
|
/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll,
|
|
0x00007F00, ptr->n << 8);
|
|
|
|
/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
|
|
clrbits_le32(&prcm_base->clksel1_pll, 0x00000040);
|
|
|
|
/* SSI */
|
|
clrsetbits_le32(&prcm_base->clksel_core,
|
|
0x00000F00, CORE_SSI_DIV << 8);
|
|
/* FSUSB */
|
|
clrsetbits_le32(&prcm_base->clksel_core,
|
|
0x00000030, CORE_FUSB_DIV << 4);
|
|
/* L4 */
|
|
clrsetbits_le32(&prcm_base->clksel_core,
|
|
0x0000000C, CORE_L4_DIV << 2);
|
|
/* L3 */
|
|
clrsetbits_le32(&prcm_base->clksel_core,
|
|
0x00000003, CORE_L3_DIV);
|
|
/* GFX */
|
|
clrsetbits_le32(&prcm_base->clksel_gfx,
|
|
0x00000007, GFX_DIV_36X);
|
|
/* RESET MGR */
|
|
clrsetbits_le32(&prcm_base->clksel_wkup,
|
|
0x00000006, WKUP_RSM << 1);
|
|
/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
|
|
clrsetbits_le32(&prcm_base->clken_pll,
|
|
0x000000F0, ptr->fsel << 4);
|
|
/* LOCK MODE */
|
|
clrsetbits_le32(&prcm_base->clken_pll,
|
|
0x00000007, PLL_LOCK);
|
|
|
|
wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen,
|
|
LDELAY);
|
|
} else if (is_running_in_flash()) {
|
|
/*
|
|
* if running from flash, jump to small relocated code
|
|
* area in SRAM.
|
|
*/
|
|
f_lock_pll = (void *) (SRAM_CLK_CODE);
|
|
|
|
p0 = readl(&prcm_base->clken_pll);
|
|
clrsetbits_le32(&p0, 0x00000007, PLL_FAST_RELOCK_BYPASS);
|
|
/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
|
|
clrsetbits_le32(&p0, 0x000000F0, ptr->fsel << 4);
|
|
|
|
p1 = readl(&prcm_base->clksel1_pll);
|
|
/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
|
|
clrsetbits_le32(&p1, 0xF8000000, ptr->m2 << 27);
|
|
/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
|
|
clrsetbits_le32(&p1, 0x07FF0000, ptr->m << 16);
|
|
/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
|
|
clrsetbits_le32(&p1, 0x00007F00, ptr->n << 8);
|
|
/* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
|
|
clrbits_le32(&p1, 0x00000040);
|
|
|
|
p2 = readl(&prcm_base->clksel_core);
|
|
/* SSI */
|
|
clrsetbits_le32(&p2, 0x00000F00, CORE_SSI_DIV << 8);
|
|
/* FSUSB */
|
|
clrsetbits_le32(&p2, 0x00000030, CORE_FUSB_DIV << 4);
|
|
/* L4 */
|
|
clrsetbits_le32(&p2, 0x0000000C, CORE_L4_DIV << 2);
|
|
/* L3 */
|
|
clrsetbits_le32(&p2, 0x00000003, CORE_L3_DIV);
|
|
|
|
p3 = (u32)&prcm_base->idlest_ckgen;
|
|
|
|
(*f_lock_pll) (p0, p1, p2, p3);
|
|
}
|
|
}
|
|
|
|
static void dpll4_init_36xx(u32 sil_index, u32 clk_index)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
struct dpll_per_36x_param *ptr;
|
|
|
|
ptr = (struct dpll_per_36x_param *)get_36x_per_dpll_param();
|
|
|
|
/* Moving it to the right sysclk base */
|
|
ptr += clk_index;
|
|
|
|
/* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */
|
|
clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_STOP << 16);
|
|
wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
|
|
|
|
/* M6 (DIV_DPLL4): CM_CLKSEL1_EMU[24:29] */
|
|
clrsetbits_le32(&prcm_base->clksel1_emu, 0x3F000000, ptr->m6 << 24);
|
|
|
|
/* M5 (CLKSEL_CAM): CM_CLKSEL1_EMU[0:5] */
|
|
clrsetbits_le32(&prcm_base->clksel_cam, 0x0000003F, ptr->m5);
|
|
|
|
/* M4 (CLKSEL_DSS1): CM_CLKSEL_DSS[0:5] */
|
|
clrsetbits_le32(&prcm_base->clksel_dss, 0x0000003F, ptr->m4);
|
|
|
|
/* M3 (CLKSEL_DSS1): CM_CLKSEL_DSS[8:13] */
|
|
clrsetbits_le32(&prcm_base->clksel_dss, 0x00003F00, ptr->m3 << 8);
|
|
|
|
/* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */
|
|
clrsetbits_le32(&prcm_base->clksel3_pll, 0x0000001F, ptr->m2);
|
|
|
|
/* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:19] */
|
|
clrsetbits_le32(&prcm_base->clksel2_pll, 0x000FFF00, ptr->m << 8);
|
|
|
|
/* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
|
|
clrsetbits_le32(&prcm_base->clksel2_pll, 0x0000007F, ptr->n);
|
|
|
|
/* M2DIV (CLKSEL_96M): CM_CLKSEL_CORE[12:13] */
|
|
clrsetbits_le32(&prcm_base->clksel_core, 0x00003000, ptr->m2div << 12);
|
|
|
|
/* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
|
|
clrsetbits_le32(&prcm_base->clken_pll, 0x00070000, PLL_LOCK << 16);
|
|
wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY);
|
|
}
|
|
|
|
static void dpll5_init_36xx(u32 sil_index, u32 clk_index)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
dpll_param *ptr = (dpll_param *) get_36x_per2_dpll_param();
|
|
|
|
/* Moving it to the right sysclk base */
|
|
ptr = ptr + clk_index;
|
|
|
|
/* PER2 DPLL (DPLL5) */
|
|
clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_STOP);
|
|
wait_on_value(1, 0, &prcm_base->idlest2_ckgen, LDELAY);
|
|
/* set M2 (usbtll_fck) */
|
|
clrsetbits_le32(&prcm_base->clksel5_pll, 0x0000001F, ptr->m2);
|
|
/* set m (11-bit multiplier) */
|
|
clrsetbits_le32(&prcm_base->clksel4_pll, 0x0007FF00, ptr->m << 8);
|
|
/* set n (7-bit divider)*/
|
|
clrsetbits_le32(&prcm_base->clksel4_pll, 0x0000007F, ptr->n);
|
|
/* lock mode */
|
|
clrsetbits_le32(&prcm_base->clken2_pll, 0x00000007, PLL_LOCK);
|
|
wait_on_value(1, 1, &prcm_base->idlest2_ckgen, LDELAY);
|
|
}
|
|
|
|
static void mpu_init_36xx(u32 sil_index, u32 clk_index)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
dpll_param *ptr = (dpll_param *) get_36x_mpu_dpll_param();
|
|
|
|
/* Moving to the right sysclk */
|
|
ptr += clk_index;
|
|
|
|
/* MPU DPLL (unlocked already */
|
|
|
|
/* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
|
|
clrsetbits_le32(&prcm_base->clksel2_pll_mpu, 0x0000001F, ptr->m2);
|
|
|
|
/* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll_mpu, 0x0007FF00, ptr->m << 8);
|
|
|
|
/* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll_mpu, 0x0000007F, ptr->n);
|
|
}
|
|
|
|
static void iva_init_36xx(u32 sil_index, u32 clk_index)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
dpll_param *ptr = (dpll_param *)get_36x_iva_dpll_param();
|
|
|
|
/* Moving to the right sysclk */
|
|
ptr += clk_index;
|
|
|
|
/* IVA DPLL */
|
|
/* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
|
|
clrsetbits_le32(&prcm_base->clken_pll_iva2, 0x00000007, PLL_STOP);
|
|
wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY);
|
|
|
|
/* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
|
|
clrsetbits_le32(&prcm_base->clksel2_pll_iva2, 0x0000001F, ptr->m2);
|
|
|
|
/* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll_iva2, 0x0007FF00, ptr->m << 8);
|
|
|
|
/* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
|
|
clrsetbits_le32(&prcm_base->clksel1_pll_iva2, 0x0000007F, ptr->n);
|
|
|
|
/* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
|
|
clrsetbits_le32(&prcm_base->clken_pll_iva2, 0x00000007, PLL_LOCK);
|
|
|
|
wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* prcm_init() - inits clocks for PRCM as defined in clocks.h
|
|
* called from SRAM, or Flash (using temp SRAM stack).
|
|
*****************************************************************************/
|
|
void prcm_init(void)
|
|
{
|
|
u32 osc_clk = 0, sys_clkin_sel;
|
|
u32 clk_index, sil_index = 0;
|
|
struct prm *prm_base = (struct prm *)PRM_BASE;
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
|
|
/*
|
|
* Gauge the input clock speed and find out the sys_clkin_sel
|
|
* value corresponding to the input clock.
|
|
*/
|
|
osc_clk = get_osc_clk_speed();
|
|
get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
|
|
|
|
/* set input crystal speed */
|
|
clrsetbits_le32(&prm_base->clksel, 0x00000007, sys_clkin_sel);
|
|
|
|
/* If the input clock is greater than 19.2M always divide/2 */
|
|
if (sys_clkin_sel > 2) {
|
|
/* input clock divider */
|
|
clrsetbits_le32(&prm_base->clksrc_ctrl, 0x000000C0, 2 << 6);
|
|
clk_index = sys_clkin_sel / 2;
|
|
} else {
|
|
/* input clock divider */
|
|
clrsetbits_le32(&prm_base->clksrc_ctrl, 0x000000C0, 1 << 6);
|
|
clk_index = sys_clkin_sel;
|
|
}
|
|
|
|
if (get_cpu_family() == CPU_OMAP36XX) {
|
|
/*
|
|
* In warm reset conditions on OMAP36xx/AM/DM37xx
|
|
* the rom code incorrectly sets the DPLL4 clock
|
|
* input divider to /6.5. Section 3.5.3.3.3.2.1 of
|
|
* the AM/DM37x TRM explains that the /6.5 divider
|
|
* is used only when the input clock is 13MHz.
|
|
*
|
|
* If the part is in this cpu family *and* the input
|
|
* clock *is not* 13 MHz, then reset the DPLL4 clock
|
|
* input divider to /1 as it should never set to /6.5
|
|
* in this case.
|
|
*/
|
|
if (sys_clkin_sel != 1) { /* 13 MHz */
|
|
/* Bit 8: DPLL4_CLKINP_DIV */
|
|
clrbits_le32(&prm_base->clksrc_ctrl, 0x00000100);
|
|
}
|
|
|
|
/* Unlock MPU DPLL (slows things down, and needed later) */
|
|
clrsetbits_le32(&prcm_base->clken_pll_mpu,
|
|
0x00000007, PLL_LOW_POWER_BYPASS);
|
|
wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu,
|
|
LDELAY);
|
|
|
|
dpll3_init_36xx(0, clk_index);
|
|
dpll4_init_36xx(0, clk_index);
|
|
dpll5_init_36xx(0, clk_index);
|
|
iva_init_36xx(0, clk_index);
|
|
mpu_init_36xx(0, clk_index);
|
|
|
|
/* Lock MPU DPLL to set frequency */
|
|
clrsetbits_le32(&prcm_base->clken_pll_mpu,
|
|
0x00000007, PLL_LOCK);
|
|
wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu,
|
|
LDELAY);
|
|
} else {
|
|
/*
|
|
* The DPLL tables are defined according to sysclk value and
|
|
* silicon revision. The clk_index value will be used to get
|
|
* the values for that input sysclk from the DPLL param table
|
|
* and sil_index will get the values for that SysClk for the
|
|
* appropriate silicon rev.
|
|
*/
|
|
if (((get_cpu_family() == CPU_OMAP34XX)
|
|
&& (get_cpu_rev() >= CPU_3XX_ES20)) ||
|
|
(get_cpu_family() == CPU_AM35XX))
|
|
sil_index = 1;
|
|
|
|
/* Unlock MPU DPLL (slows things down, and needed later) */
|
|
clrsetbits_le32(&prcm_base->clken_pll_mpu,
|
|
0x00000007, PLL_LOW_POWER_BYPASS);
|
|
wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu,
|
|
LDELAY);
|
|
|
|
dpll3_init_34xx(sil_index, clk_index);
|
|
dpll4_init_34xx(sil_index, clk_index);
|
|
dpll5_init_34xx(sil_index, clk_index);
|
|
if (get_cpu_family() != CPU_AM35XX)
|
|
iva_init_34xx(sil_index, clk_index);
|
|
|
|
mpu_init_34xx(sil_index, clk_index);
|
|
|
|
/* Lock MPU DPLL to set frequency */
|
|
clrsetbits_le32(&prcm_base->clken_pll_mpu,
|
|
0x00000007, PLL_LOCK);
|
|
wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu,
|
|
LDELAY);
|
|
}
|
|
|
|
/* Set up GPTimers to sys_clk source only */
|
|
setbits_le32(&prcm_base->clksel_per, 0x000000FF);
|
|
setbits_le32(&prcm_base->clksel_wkup, 1);
|
|
|
|
sdelay(5000);
|
|
}
|
|
|
|
/*
|
|
* Enable usb ehci uhh, tll clocks
|
|
*/
|
|
void ehci_clocks_enable(void)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
|
|
/* Enable USBHOST_L3_ICLK (USBHOST_MICLK) */
|
|
setbits_le32(&prcm_base->iclken_usbhost, 1);
|
|
/*
|
|
* Enable USBHOST_48M_FCLK (USBHOST_FCLK1)
|
|
* and USBHOST_120M_FCLK (USBHOST_FCLK2)
|
|
*/
|
|
setbits_le32(&prcm_base->fclken_usbhost, 0x00000003);
|
|
/* Enable USBTTL_ICLK */
|
|
setbits_le32(&prcm_base->iclken3_core, 0x00000004);
|
|
/* Enable USBTTL_FCLK */
|
|
setbits_le32(&prcm_base->fclken3_core, 0x00000004);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* peripheral_enable() - Enable the clks & power for perifs (GPT2, UART1,...)
|
|
*****************************************************************************/
|
|
void per_clocks_enable(void)
|
|
{
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
|
|
/* Enable GP2 timer. */
|
|
setbits_le32(&prcm_base->clksel_per, 0x01); /* GPT2 = sys clk */
|
|
setbits_le32(&prcm_base->iclken_per, 0x08); /* ICKen GPT2 */
|
|
setbits_le32(&prcm_base->fclken_per, 0x08); /* FCKen GPT2 */
|
|
|
|
/* Enable GP9 timer. */
|
|
setbits_le32(&prcm_base->clksel_per, 0x80); /* GPT9 = 32kHz clk */
|
|
setbits_le32(&prcm_base->iclken_per, 0x400); /* ICKen GPT9 */
|
|
setbits_le32(&prcm_base->fclken_per, 0x400); /* FCKen GPT9 */
|
|
|
|
#ifdef CONFIG_SYS_NS16550
|
|
/* Enable UART1 clocks */
|
|
setbits_le32(&prcm_base->fclken1_core, 0x00002000);
|
|
setbits_le32(&prcm_base->iclken1_core, 0x00002000);
|
|
|
|
/* Enable UART2 clocks */
|
|
setbits_le32(&prcm_base->fclken1_core, 0x00004000);
|
|
setbits_le32(&prcm_base->iclken1_core, 0x00004000);
|
|
|
|
/* UART 3 Clocks */
|
|
setbits_le32(&prcm_base->fclken_per, 0x00000800);
|
|
setbits_le32(&prcm_base->iclken_per, 0x00000800);
|
|
#endif
|
|
|
|
#if defined(CONFIG_OMAP3_GPIO_2)
|
|
setbits_le32(&prcm_base->fclken_per, 0x00002000);
|
|
setbits_le32(&prcm_base->iclken_per, 0x00002000);
|
|
#endif
|
|
#if defined(CONFIG_OMAP3_GPIO_3)
|
|
setbits_le32(&prcm_base->fclken_per, 0x00004000);
|
|
setbits_le32(&prcm_base->iclken_per, 0x00004000);
|
|
#endif
|
|
#if defined(CONFIG_OMAP3_GPIO_4)
|
|
setbits_le32(&prcm_base->fclken_per, 0x00008000);
|
|
setbits_le32(&prcm_base->iclken_per, 0x00008000);
|
|
#endif
|
|
#if defined(CONFIG_OMAP3_GPIO_5)
|
|
setbits_le32(&prcm_base->fclken_per, 0x00010000);
|
|
setbits_le32(&prcm_base->iclken_per, 0x00010000);
|
|
#endif
|
|
#if defined(CONFIG_OMAP3_GPIO_6)
|
|
setbits_le32(&prcm_base->fclken_per, 0x00020000);
|
|
setbits_le32(&prcm_base->iclken_per, 0x00020000);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_OMAP24XX
|
|
/* Turn on all 3 I2C clocks */
|
|
setbits_le32(&prcm_base->fclken1_core, 0x00038000);
|
|
setbits_le32(&prcm_base->iclken1_core, 0x00038000); /* I2C1,2,3 = on */
|
|
#endif
|
|
/* Enable the ICLK for 32K Sync Timer as its used in udelay */
|
|
setbits_le32(&prcm_base->iclken_wkup, 0x00000004);
|
|
|
|
if (get_cpu_family() != CPU_AM35XX)
|
|
out_le32(&prcm_base->fclken_iva2, FCK_IVA2_ON);
|
|
|
|
out_le32(&prcm_base->fclken1_core, FCK_CORE1_ON);
|
|
out_le32(&prcm_base->iclken1_core, ICK_CORE1_ON);
|
|
out_le32(&prcm_base->iclken2_core, ICK_CORE2_ON);
|
|
out_le32(&prcm_base->fclken_wkup, FCK_WKUP_ON);
|
|
out_le32(&prcm_base->iclken_wkup, ICK_WKUP_ON);
|
|
out_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
|
|
out_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
|
|
if (get_cpu_family() != CPU_AM35XX) {
|
|
out_le32(&prcm_base->fclken_cam, FCK_CAM_ON);
|
|
out_le32(&prcm_base->iclken_cam, ICK_CAM_ON);
|
|
}
|
|
|
|
sdelay(1000);
|
|
}
|