mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
410 lines
10 KiB
C
410 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* clock_ti814x.c
|
|
*
|
|
* Clocks for TI814X based boards
|
|
*
|
|
* Copyright (C) 2013, Texas Instruments, Incorporated
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <linux/delay.h>
|
|
|
|
/* PRCM */
|
|
#define PRCM_MOD_EN 0x2
|
|
|
|
/* CLK_SRC */
|
|
#define OSC_SRC0 0
|
|
#define OSC_SRC1 1
|
|
|
|
#define L3_OSC_SRC OSC_SRC0
|
|
|
|
#define OSC_0_FREQ 20
|
|
|
|
#define DCO_HS2_MIN 500
|
|
#define DCO_HS2_MAX 1000
|
|
#define DCO_HS1_MIN 1000
|
|
#define DCO_HS1_MAX 2000
|
|
|
|
#define SELFREQDCO_HS2 0x00000801
|
|
#define SELFREQDCO_HS1 0x00001001
|
|
|
|
#define MPU_N 0x1
|
|
#define MPU_M 0x3C
|
|
#define MPU_M2 1
|
|
#define MPU_CLKCTRL 0x1
|
|
|
|
#define L3_N 19
|
|
#define L3_M 880
|
|
#define L3_M2 4
|
|
#define L3_CLKCTRL 0x801
|
|
|
|
#define DDR_N 19
|
|
#define DDR_M 666
|
|
#define DDR_M2 2
|
|
#define DDR_CLKCTRL 0x801
|
|
|
|
/* ADPLLJ register values */
|
|
#define ADPLLJ_CLKCTRL_HS2 0x00000801 /* HS2 mode, TINT2 = 1 */
|
|
#define ADPLLJ_CLKCTRL_HS1 0x00001001 /* HS1 mode, TINT2 = 1 */
|
|
#define ADPLLJ_CLKCTRL_CLKDCOLDOEN (1 << 29)
|
|
#define ADPLLJ_CLKCTRL_IDLE (1 << 23)
|
|
#define ADPLLJ_CLKCTRL_CLKOUTEN (1 << 20)
|
|
#define ADPLLJ_CLKCTRL_CLKOUTLDOEN (1 << 19)
|
|
#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ (1 << 17)
|
|
#define ADPLLJ_CLKCTRL_LPMODE (1 << 12)
|
|
#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN (1 << 11)
|
|
#define ADPLLJ_CLKCTRL_REGM4XEN (1 << 10)
|
|
#define ADPLLJ_CLKCTRL_TINITZ (1 << 0)
|
|
#define ADPLLJ_CLKCTRL_CLKDCO (ADPLLJ_CLKCTRL_CLKDCOLDOEN | \
|
|
ADPLLJ_CLKCTRL_CLKOUTEN | \
|
|
ADPLLJ_CLKCTRL_CLKOUTLDOEN | \
|
|
ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ)
|
|
|
|
#define ADPLLJ_STATUS_PHASELOCK (1 << 10)
|
|
#define ADPLLJ_STATUS_FREQLOCK (1 << 9)
|
|
#define ADPLLJ_STATUS_PHSFRQLOCK (ADPLLJ_STATUS_PHASELOCK | \
|
|
ADPLLJ_STATUS_FREQLOCK)
|
|
#define ADPLLJ_STATUS_BYPASSACK (1 << 8)
|
|
#define ADPLLJ_STATUS_BYPASS (1 << 0)
|
|
#define ADPLLJ_STATUS_BYPASSANDACK (ADPLLJ_STATUS_BYPASSACK | \
|
|
ADPLLJ_STATUS_BYPASS)
|
|
|
|
#define ADPLLJ_TENABLE_ENB (1 << 0)
|
|
#define ADPLLJ_TENABLEDIV_ENB (1 << 0)
|
|
|
|
#define ADPLLJ_M2NDIV_M2SHIFT 16
|
|
|
|
#define MPU_PLL_BASE (PLL_SUBSYS_BASE + 0x048)
|
|
#define L3_PLL_BASE (PLL_SUBSYS_BASE + 0x110)
|
|
#define DDR_PLL_BASE (PLL_SUBSYS_BASE + 0x290)
|
|
|
|
struct ad_pll {
|
|
unsigned int pwrctrl;
|
|
unsigned int clkctrl;
|
|
unsigned int tenable;
|
|
unsigned int tenablediv;
|
|
unsigned int m2ndiv;
|
|
unsigned int mn2div;
|
|
unsigned int fracdiv;
|
|
unsigned int bwctrl;
|
|
unsigned int fracctrl;
|
|
unsigned int status;
|
|
unsigned int m3div;
|
|
unsigned int rampctrl;
|
|
};
|
|
|
|
#define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0)
|
|
|
|
#define ENET_CLKCTRL_CMPL 0x30000
|
|
|
|
#define SATA_PLL_BASE (CTRL_BASE + 0x0720)
|
|
|
|
struct sata_pll {
|
|
unsigned int pllcfg0;
|
|
unsigned int pllcfg1;
|
|
unsigned int pllcfg2;
|
|
unsigned int pllcfg3;
|
|
unsigned int pllcfg4;
|
|
unsigned int pllstatus;
|
|
unsigned int rxstatus;
|
|
unsigned int txstatus;
|
|
unsigned int testcfg;
|
|
};
|
|
|
|
#define SEL_IN_FREQ (0x1 << 31)
|
|
#define DIGCLRZ (0x1 << 30)
|
|
#define ENDIGLDO (0x1 << 4)
|
|
#define APLL_CP_CURR (0x1 << 3)
|
|
#define ENBGSC_REF (0x1 << 2)
|
|
#define ENPLLLDO (0x1 << 1)
|
|
#define ENPLL (0x1 << 0)
|
|
|
|
#define SATA_PLLCFG0_1 (SEL_IN_FREQ | ENBGSC_REF)
|
|
#define SATA_PLLCFG0_2 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF)
|
|
#define SATA_PLLCFG0_3 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF | ENPLLLDO)
|
|
#define SATA_PLLCFG0_4 (SEL_IN_FREQ | DIGCLRZ | ENDIGLDO | ENBGSC_REF | \
|
|
ENPLLLDO | ENPLL)
|
|
|
|
#define PLL_LOCK (0x1 << 0)
|
|
|
|
#define ENSATAMODE (0x1 << 31)
|
|
#define PLLREFSEL (0x1 << 30)
|
|
#define MDIVINT (0x4b << 18)
|
|
#define EN_CLKAUX (0x1 << 5)
|
|
#define EN_CLK125M (0x1 << 4)
|
|
#define EN_CLK100M (0x1 << 3)
|
|
#define EN_CLK50M (0x1 << 2)
|
|
|
|
#define SATA_PLLCFG1 (ENSATAMODE | \
|
|
PLLREFSEL | \
|
|
MDIVINT | \
|
|
EN_CLKAUX | \
|
|
EN_CLK125M | \
|
|
EN_CLK100M | \
|
|
EN_CLK50M)
|
|
|
|
#define DIGLDO_EN_CAPLESSMODE (0x1 << 22)
|
|
#define PLLDO_EN_LDO_STABLE (0x1 << 11)
|
|
#define PLLDO_EN_BUF_CUR (0x1 << 7)
|
|
#define PLLDO_EN_LP (0x1 << 6)
|
|
#define PLLDO_CTRL_TRIM_1_4V (0x10 << 1)
|
|
|
|
#define SATA_PLLCFG3 (DIGLDO_EN_CAPLESSMODE | \
|
|
PLLDO_EN_LDO_STABLE | \
|
|
PLLDO_EN_BUF_CUR | \
|
|
PLLDO_EN_LP | \
|
|
PLLDO_CTRL_TRIM_1_4V)
|
|
|
|
const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE;
|
|
const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE;
|
|
const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE;
|
|
|
|
/*
|
|
* Enable the peripheral clock for required peripherals
|
|
*/
|
|
static void enable_per_clocks(void)
|
|
{
|
|
/* HSMMC1 */
|
|
writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl);
|
|
while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* Ethernet */
|
|
writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl);
|
|
writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl);
|
|
while ((readl(&cmalwon->ethernet0clkctrl) & ENET_CLKCTRL_CMPL) != 0)
|
|
;
|
|
writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl);
|
|
while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0)
|
|
;
|
|
|
|
/* RTC clocks */
|
|
writel(PRCM_MOD_EN, &cmalwon->rtcclkstctrl);
|
|
writel(PRCM_MOD_EN, &cmalwon->rtcclkctrl);
|
|
while (readl(&cmalwon->rtcclkctrl) != PRCM_MOD_EN)
|
|
;
|
|
}
|
|
|
|
/*
|
|
* select the HS1 or HS2 for DCO Freq
|
|
* return : CLKCTRL
|
|
*/
|
|
static u32 pll_dco_freq_sel(u32 clkout_dco)
|
|
{
|
|
if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX)
|
|
return SELFREQDCO_HS2;
|
|
else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX)
|
|
return SELFREQDCO_HS1;
|
|
else
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* select the sigma delta config
|
|
* return: sigma delta val
|
|
*/
|
|
static u32 pll_sigma_delta_val(u32 clkout_dco)
|
|
{
|
|
u32 sig_val = 0;
|
|
|
|
sig_val = (clkout_dco + 225) / 250;
|
|
sig_val = sig_val << 24;
|
|
|
|
return sig_val;
|
|
}
|
|
|
|
/*
|
|
* configure individual ADPLLJ
|
|
*/
|
|
static void pll_config(u32 base, u32 n, u32 m, u32 m2,
|
|
u32 clkctrl_val, int adpllj)
|
|
{
|
|
const struct ad_pll *adpll = (struct ad_pll *)base;
|
|
u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0;
|
|
u32 sig_val = 0, hs_mod = 0;
|
|
|
|
m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n;
|
|
mn2val = m;
|
|
|
|
/* calculate clkout_dco */
|
|
clkout_dco = ((OSC_0_FREQ / (n+1)) * m);
|
|
|
|
/* sigma delta & Hs mode selection skip for ADPLLS*/
|
|
if (adpllj) {
|
|
sig_val = pll_sigma_delta_val(clkout_dco);
|
|
hs_mod = pll_dco_freq_sel(clkout_dco);
|
|
}
|
|
|
|
/* by-pass pll */
|
|
read_clkctrl = readl(&adpll->clkctrl);
|
|
writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl);
|
|
while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK)
|
|
!= ADPLLJ_STATUS_BYPASSANDACK)
|
|
;
|
|
|
|
/* clear TINITZ */
|
|
read_clkctrl = readl(&adpll->clkctrl);
|
|
writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
|
|
|
|
/*
|
|
* ref_clk = 20/(n + 1);
|
|
* clkout_dco = ref_clk * m;
|
|
* clk_out = clkout_dco/m2;
|
|
*/
|
|
read_clkctrl = readl(&adpll->clkctrl) &
|
|
~(ADPLLJ_CLKCTRL_LPMODE |
|
|
ADPLLJ_CLKCTRL_DRIFTGUARDIAN |
|
|
ADPLLJ_CLKCTRL_REGM4XEN);
|
|
writel(m2nval, &adpll->m2ndiv);
|
|
writel(mn2val, &adpll->mn2div);
|
|
|
|
/* Skip for modena(ADPLLS) */
|
|
if (adpllj) {
|
|
writel(sig_val, &adpll->fracdiv);
|
|
writel((read_clkctrl | hs_mod), &adpll->clkctrl);
|
|
}
|
|
|
|
/* Load M2, N2 dividers of ADPLL */
|
|
writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
|
|
writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
|
|
|
|
/* Load M, N dividers of ADPLL */
|
|
writel(ADPLLJ_TENABLE_ENB, &adpll->tenable);
|
|
writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable);
|
|
|
|
/* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */
|
|
read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO;
|
|
if (adpllj)
|
|
writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO),
|
|
&adpll->clkctrl);
|
|
|
|
/* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */
|
|
read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE;
|
|
writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
|
|
|
|
/* Wait for phase and freq lock */
|
|
while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) !=
|
|
ADPLLJ_STATUS_PHSFRQLOCK)
|
|
;
|
|
}
|
|
|
|
static void unlock_pll_control_mmr(void)
|
|
{
|
|
/* TRM 2.10.1.4 and 3.2.7-3.2.11 */
|
|
writel(0x1EDA4C3D, 0x481C5040);
|
|
writel(0x2FF1AC2B, 0x48140060);
|
|
writel(0xF757FDC0, 0x48140064);
|
|
writel(0xE2BC3A6D, 0x48140068);
|
|
writel(0x1EBF131D, 0x4814006c);
|
|
writel(0x6F361E05, 0x48140070);
|
|
}
|
|
|
|
static void mpu_pll_config(void)
|
|
{
|
|
pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0);
|
|
}
|
|
|
|
static void l3_pll_config(void)
|
|
{
|
|
u32 l3_osc_src, rd_osc_src = 0;
|
|
|
|
l3_osc_src = L3_OSC_SRC;
|
|
rd_osc_src = readl(OSC_SRC_CTRL);
|
|
|
|
if (OSC_SRC0 == l3_osc_src)
|
|
writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL);
|
|
else
|
|
writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL);
|
|
|
|
pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1);
|
|
}
|
|
|
|
void ddr_pll_config(unsigned int ddrpll_m)
|
|
{
|
|
pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1);
|
|
}
|
|
|
|
void sata_pll_config(void)
|
|
{
|
|
/*
|
|
* This sequence for configuring the SATA PLL
|
|
* resident in the control module is documented
|
|
* in TI8148 TRM section 21.3.1
|
|
*/
|
|
writel(SATA_PLLCFG1, &spll->pllcfg1);
|
|
udelay(50);
|
|
|
|
writel(SATA_PLLCFG3, &spll->pllcfg3);
|
|
udelay(50);
|
|
|
|
writel(SATA_PLLCFG0_1, &spll->pllcfg0);
|
|
udelay(50);
|
|
|
|
writel(SATA_PLLCFG0_2, &spll->pllcfg0);
|
|
udelay(50);
|
|
|
|
writel(SATA_PLLCFG0_3, &spll->pllcfg0);
|
|
udelay(50);
|
|
|
|
writel(SATA_PLLCFG0_4, &spll->pllcfg0);
|
|
udelay(50);
|
|
|
|
while (((readl(&spll->pllstatus) & PLL_LOCK) == 0))
|
|
;
|
|
}
|
|
|
|
void enable_dmm_clocks(void)
|
|
{
|
|
writel(PRCM_MOD_EN, &cmdef->fwclkctrl);
|
|
writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl);
|
|
writel(PRCM_MOD_EN, &cmdef->emif0clkctrl);
|
|
while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN)
|
|
;
|
|
writel(PRCM_MOD_EN, &cmdef->emif1clkctrl);
|
|
while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN)
|
|
;
|
|
while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300)
|
|
;
|
|
writel(PRCM_MOD_EN, &cmdef->dmmclkctrl);
|
|
while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN)
|
|
;
|
|
writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl);
|
|
while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100)
|
|
;
|
|
}
|
|
|
|
void setup_clocks_for_console(void)
|
|
{
|
|
unlock_pll_control_mmr();
|
|
/* UART0 */
|
|
writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
|
|
while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
}
|
|
|
|
void setup_early_clocks(void)
|
|
{
|
|
setup_clocks_for_console();
|
|
}
|
|
|
|
/*
|
|
* Configure the PLL/PRCM for necessary peripherals
|
|
*/
|
|
void prcm_init(void)
|
|
{
|
|
/* Enable the control module */
|
|
writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
|
|
|
|
/* Configure PLLs */
|
|
mpu_pll_config();
|
|
l3_pll_config();
|
|
sata_pll_config();
|
|
|
|
/* Enable the required peripherals */
|
|
enable_per_clocks();
|
|
}
|