u-boot/arch/arm/include/asm/arch-am33xx/mem.h
pekon gupta 222a3113b4 ARM: omap: clean redundant PISMO_xx macros used in OMAP3
PISMO_xx macros were used to define 'Platform Independent Storage MOdule'
related GPMC configurations. This patch
- Replaces these OMAP3 specific macros with generic CONFIG_xx macros as provided
  by current u-boot infrastructure.
- Removes unused redundant macros, which are no longer required after
  merging of common platform code in following commit
      commit a0a37183bd
      ARM: omap: merge GPMC initialization code for all platform

+-----------------+-----------------------------------------------------------+
| Macro           | Reason for removal                                        |
+-----------------+-----------------------------------------------------------+
| PISMO1_NOR_BASE | duplicate of CONFIG_SYS_FLASH_BASE                        |
+-----------------+-----------------------------------------------------------+
| PISMO1_NAND_BASE| duplicate of CONFIG_SYS_NAND_BASE                         |
+-----------------+-----------------------------------------------------------+
| PISMO1_ONEN_BASE| duplicate of CONFIG_SYS_ONENAND_BASE                      |
+-----------------+-----------------------------------------------------------+
| PISMO1_NAND_SIZE| GPMC accesses NAND device via I/O mapped registers so     |
|                 | configuring GPMC chip-select for smallest allowable       |
|                 | segment (GPMC_SIZE_16M) is enough.                        |
+-----------------+-----------------------------------------------------------+
| PISMO1_ONEN_SIZE| OneNAND uses a fixed GPMC chip-select address-space of    |
|                 | 128MB (GPMC_SIZE_128M)                                    |
+-----------------+-----------------------------------------------------------+
+-----------------+-----------------------------------------------------------+
| PISMO1_NOR      |  Unused Macros                                            |
| PISMO1_NAND     |                                                           |
| PISMO2_CS0      |                                                           |
| PISMO2_CS1      |                                                           |
| PISMO1_ONENAND  |                                                           |
| PISMO2_NAND_CS0 |                                                           |
| PISMO2_NAND_CS1 |                                                           |
| PISMO1_NOR_BASE |                                                           |
| PISMO1_NAND_BASE|                                                           |
| PISMO2_CS0_BASE |                                                           |
+-----------------+-----------------------------------------------------------+

Signed-off-by: Pekon Gupta <pekon@ti.com>
2014-07-25 16:26:12 -04:00

64 lines
1.7 KiB
C

/*
* (C) Copyright 2006-2008
* Texas Instruments, <www.ti.com>
*
* Author
* Mansoor Ahamed <mansoor.ahamed@ti.com>
*
* Initial Code from:
* Richard Woodruff <r-woodruff2@ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _MEM_H_
#define _MEM_H_
/*
* GPMC settings -
* Definitions is as per the following format
* #define <PART>_GPMC_CONFIG<x> <value>
* Where:
* PART is the part name e.g. STNOR - Intel Strata Flash
* x is GPMC config registers from 1 to 6 (there will be 6 macros)
* Value is corresponding value
*
* For every valid PRCM configuration there should be only one definition of
* the same. if values are independent of the board, this definition will be
* present in this file if values are dependent on the board, then this should
* go into corresponding mem-boardName.h file
*
* Currently valid part Names are (PART):
* M_NAND - Micron NAND
* STNOR - STMicrolelctronics M29W128GL
*/
#define GPMC_SIZE_256M 0x0
#define GPMC_SIZE_128M 0x8
#define GPMC_SIZE_64M 0xC
#define GPMC_SIZE_32M 0xE
#define GPMC_SIZE_16M 0xF
#define M_NAND_GPMC_CONFIG1 0x00000800
#define M_NAND_GPMC_CONFIG2 0x001e1e00
#define M_NAND_GPMC_CONFIG3 0x001e1e00
#define M_NAND_GPMC_CONFIG4 0x16051807
#define M_NAND_GPMC_CONFIG5 0x00151e1e
#define M_NAND_GPMC_CONFIG6 0x16000f80
#define M_NAND_GPMC_CONFIG7 0x00000008
#define STNOR_GPMC_CONFIG1 0x00001200
#define STNOR_GPMC_CONFIG2 0x00101000
#define STNOR_GPMC_CONFIG3 0x00030301
#define STNOR_GPMC_CONFIG4 0x10041004
#define STNOR_GPMC_CONFIG5 0x000C1010
#define STNOR_GPMC_CONFIG6 0x08070280
#define STNOR_GPMC_CONFIG7 0x00000F48
/* max number of GPMC Chip Selects */
#define GPMC_MAX_CS 8
/* max number of GPMC regs */
#define GPMC_MAX_REG 7
#define DBG_MPDB 6
#endif /* endif _MEM_H_ */