u-boot/arch/blackfin/include/asm/mach-common/bits/sport.h
Peter Tyser 819833af39 Move architecture-specific includes to arch/$ARCH/include/asm
This helps to clean up the include/ directory so that it only contains
non-architecture-specific headers and also matches Linux's directory
layout which many U-Boot developers are already familiar with.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-04-13 09:13:12 +02:00

89 lines
3.9 KiB
C

/*
* SPORT Masks
*/
#ifndef __BFIN_PERIPHERAL_SPORT__
#define __BFIN_PERIPHERAL_SPORT__
/* SPORTx_TCR1 Masks */
#define TSPEN 0x0001 /* TX enable */
#define ITCLK 0x0002 /* Internal TX Clock Select */
#define TDTYPE 0x000C /* TX Data Formatting Select */
#define DTYPE_NORM 0x0004 /* Data Format Normal */
#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
#define TLSBIT 0x0010 /* TX Bit Order */
#define ITFS 0x0200 /* Internal TX Frame Sync Select */
#define TFSR 0x0400 /* TX Frame Sync Required Select */
#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */
#define LTFS 0x1000 /* Low TX Frame Sync Select */
#define LATFS 0x2000 /* Late TX Frame Sync Select */
#define TCKFE 0x4000 /* TX Clock Falling Edge Select */
/* SPORTx_TCR2 Masks */
#define SLEN 0x001F /* TX Word Length */
#define TXSE 0x0100 /* TX Secondary Enable */
#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */
#define TRFST 0x0400 /* TX Right-First Data Order */
/* SPORTx_RCR1 Masks */
#define RSPEN 0x0001 /* RX enable */
#define IRCLK 0x0002 /* Internal RX Clock Select */
#define RDTYPE 0x000C /* RX Data Formatting Select */
#define DTYPE_NORM 0x0004 /* Data Format Normal */
#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
#define RLSBIT 0x0010 /* RX Bit Order */
#define IRFS 0x0200 /* Internal RX Frame Sync Select */
#define RFSR 0x0400 /* RX Frame Sync Required Select */
#define LRFS 0x1000 /* Low RX Frame Sync Select */
#define LARFS 0x2000 /* Late RX Frame Sync Select */
#define RCKFE 0x4000 /* RX Clock Falling Edge Select */
/* SPORTx_RCR2 Masks */
#define SLEN 0x001F /* RX Word Length */
#define RXSE 0x0100 /* RX Secondary Enable */
#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */
#define RRFST 0x0400 /* Right-First Data Order */
/* SPORTx_STAT Masks */
#define RXNE 0x0001 /* RX FIFO Not Empty Status */
#define RUVF 0x0002 /* RX Underflow Status */
#define ROVF 0x0004 /* RX Overflow Status */
#define TXF 0x0008 /* TX FIFO Full Status */
#define TUVF 0x0010 /* TX Underflow Status */
#define TOVF 0x0020 /* TX Overflow Status */
#define TXHRE 0x0040 /* TX Hold Register Empty */
/* SPORTx_MCMC1 Masks */
#define WSIZE 0xF000 /* Multichannel Window Size Field */
#define WOFF 0x03FF /* Multichannel Window Offset Field */
/* SPORTx_MCMC2 Masks */
#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */
#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */
#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */
#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */
#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */
#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */
#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */
#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */
#define MFD 0xF000 /* Multichannel Frame Delay */
#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */
#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */
#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */
#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */
#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */
#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */
#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */
#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */
#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */
#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */
#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */
#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */
#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */
#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */
#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */
#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */
#endif