mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
745df68d36
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
149 lines
4.9 KiB
Text
149 lines
4.9 KiB
Text
#
|
|
# PINCTRL infrastructure and drivers
|
|
#
|
|
|
|
menu "Pin controllers"
|
|
|
|
config PINCTRL
|
|
bool "Support pin controllers"
|
|
depends on DM
|
|
help
|
|
This enables the basic support for pinctrl framework. You may want
|
|
to enable some more options depending on what you want to do.
|
|
|
|
config PINCTRL_FULL
|
|
bool "Support full pin controllers"
|
|
depends on PINCTRL && OF_CONTROL
|
|
default y
|
|
help
|
|
This provides Linux-compatible device tree interface for the pinctrl
|
|
subsystem. This feature depends on device tree configuration because
|
|
it parses a device tree to look for the pinctrl device which the
|
|
peripheral device is associated with.
|
|
|
|
If this option is disabled (it is the only possible choice for non-DT
|
|
boards), the pinctrl core provides no systematic mechanism for
|
|
identifying peripheral devices, applying needed pinctrl settings.
|
|
It is totally up to the implementation of each low-level driver.
|
|
You can save memory footprint in return for some limitations.
|
|
|
|
config PINCTRL_GENERIC
|
|
bool "Support generic pin controllers"
|
|
depends on PINCTRL_FULL
|
|
default y
|
|
help
|
|
Say Y here if you want to use the pinctrl subsystem through the
|
|
generic DT interface. If enabled, some functions become available
|
|
to parse common properties such as "pins", "groups", "functions" and
|
|
some pin configuration parameters. It would be easier if you only
|
|
need the generic DT interface for pin muxing and pin configuration.
|
|
If you need to handle vendor-specific DT properties, you can disable
|
|
this option and implement your own set_state callback in the pinctrl
|
|
operations.
|
|
|
|
config PINMUX
|
|
bool "Support pin multiplexing controllers"
|
|
depends on PINCTRL_GENERIC
|
|
default y
|
|
help
|
|
This option enables pin multiplexing through the generic pinctrl
|
|
framework. Most SoCs have their own own multiplexing arrangement
|
|
where a single pin can be used for several functions. An SoC pinctrl
|
|
driver allows the required function to be selected for each pin.
|
|
The driver is typically controlled by the device tree.
|
|
|
|
config PINCONF
|
|
bool "Support pin configuration controllers"
|
|
depends on PINCTRL_GENERIC
|
|
help
|
|
This option enables pin configuration through the generic pinctrl
|
|
framework.
|
|
|
|
config SPL_PINCTRL
|
|
bool "Support pin controlloers in SPL"
|
|
depends on SPL && SPL_DM
|
|
help
|
|
This option is an SPL-variant of the PINCTRL option.
|
|
See the help of PINCTRL for details.
|
|
|
|
config SPL_PINCTRL_FULL
|
|
bool "Support full pin controllers in SPL"
|
|
depends on SPL_PINCTRL && SPL_OF_CONTROL
|
|
default y
|
|
help
|
|
This option is an SPL-variant of the PINCTRL_FULL option.
|
|
See the help of PINCTRL_FULL for details.
|
|
|
|
config SPL_PINCTRL_GENERIC
|
|
bool "Support generic pin controllers in SPL"
|
|
depends on SPL_PINCTRL_FULL
|
|
default y
|
|
help
|
|
This option is an SPL-variant of the PINCTRL_GENERIC option.
|
|
See the help of PINCTRL_GENERIC for details.
|
|
|
|
config SPL_PINMUX
|
|
bool "Support pin multiplexing controllers in SPL"
|
|
depends on SPL_PINCTRL_GENERIC
|
|
default y
|
|
help
|
|
This option is an SPL-variant of the PINMUX option.
|
|
See the help of PINMUX for details.
|
|
The pinctrl subsystem can add a substantial overhead to the SPL
|
|
image since it typically requires quite a few tables either in the
|
|
driver or in the device tree. If this is acceptable and you need
|
|
to adjust pin multiplexing in SPL in order to boot into U-Boot,
|
|
enable this option. You will need to enable device tree in SPL
|
|
for this to work.
|
|
|
|
config SPL_PINCONF
|
|
bool "Support pin configuration controllers in SPL"
|
|
depends on SPL_PINCTRL_GENERIC
|
|
help
|
|
This option is an SPL-variant of the PINCONF option.
|
|
See the help of PINCONF for details.
|
|
|
|
if PINCTRL || SPL_PINCTRL
|
|
|
|
config ROCKCHIP_PINCTRL
|
|
bool "Rockchip pin control driver"
|
|
depends on DM
|
|
help
|
|
Support pin multiplexing control on Rockchip SoCs. The driver is
|
|
controlled by a device tree node which contains both the GPIO
|
|
definitions and pin control functions for each available multiplex
|
|
function.
|
|
|
|
config ROCKCHIP_3036_PINCTRL
|
|
bool "Rockchip rk3036 pin control driver"
|
|
depends on DM
|
|
help
|
|
Support pin multiplexing control on Rockchip rk3036 SoCs. The driver is
|
|
controlled by a device tree node which contains both the GPIO
|
|
definitions and pin control functions for each available multiplex
|
|
function.
|
|
|
|
config PINCTRL_SANDBOX
|
|
bool "Sandbox pinctrl driver"
|
|
depends on SANDBOX
|
|
help
|
|
This enables pinctrl driver for sandbox. Currently, this driver
|
|
actually does nothing but print debug messages when pinctrl
|
|
operations are invoked.
|
|
|
|
config PIC32_PINCTRL
|
|
bool "Microchip PIC32 pin-control and pin-mux driver"
|
|
depends on DM && MACH_PIC32
|
|
default y
|
|
help
|
|
Supports individual pin selection and configuration for each remappable
|
|
peripheral available on Microchip PIC32 SoCs. This driver is controlled
|
|
by a device tree node which contains both GPIO defintion and pin control
|
|
functions.
|
|
|
|
endif
|
|
|
|
source "drivers/pinctrl/nxp/Kconfig"
|
|
source "drivers/pinctrl/uniphier/Kconfig"
|
|
|
|
endmenu
|