mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
f94ce9eb05
Current setup instructions for i.MX8QM MEK board include somewhat conflicting instructions, so here's an attempt to fix it. After trying both sets of firmwares, I can conclude that both of them fail to work: - no boot at all with imx-sc-firmware-0.7 / firmware-imx-7.6 - partial success with imx-sc-firmware-1.1 / firmware-imx-8.0: U-Boot 2021.04-rc3-00135-ge0669a43c8 (Mar 08 2021 - 16:49:08 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Freescale i.MX8QM MEK Board: iMX8QM MEK mu_hal_receivemsg timeout Build: SCFW 65afe5f6, SECO-FW 65afe5f6, ATF a-20190 mu_hal_receivemsg timeout sc_misc_get_boot_dev: res:16 Boot: SD0 DRAM: mu_hal_sendmsg timeout sc_rm_is_memreg_owned: mr:0 res:21 ... Signed-off-by: Priit Laes <priit.laes@paf.com>
54 lines
1.3 KiB
Text
54 lines
1.3 KiB
Text
U-Boot for the NXP i.MX8QM EVK board
|
|
|
|
Quick Start
|
|
===========
|
|
|
|
- Build the ARM Trusted firmware binary
|
|
- Get scfw_tcm.bin and ahab-container.img
|
|
- Build U-Boot
|
|
- Flash the binary into the SD card
|
|
- Boot
|
|
|
|
Get and Build the ARM Trusted firmware
|
|
======================================
|
|
|
|
$ git clone https://source.codeaurora.org/external/imx/imx-atf
|
|
$ cd imx-atf/
|
|
$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga
|
|
$ make PLAT=imx8qm bl31
|
|
|
|
And copy the resulting bl31.bin to u-boot directory:
|
|
|
|
$ cp build/imx8qm/release/bl31.bin path/to/u-boot/
|
|
|
|
Get scfw_tcm.bin and ahab-container.img
|
|
=======================================
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin
|
|
$ chmod +x imx-sc-firmware-1.1.bin
|
|
$ ./imx-sc-firmware-1.1.bin
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
|
|
$ chmod +x firmware-imx-8.0.bin
|
|
$ ./firmware-imx-8.0.bin
|
|
|
|
|
|
And copy the following firmwares to U-Boot folder:
|
|
|
|
* `imx-sc-firmware-1.1/mx8qm-mek-scfw-tcm.bin`
|
|
* `firmware-imx-8.0/firmware/seco/mx8qm-ahab-container.img`
|
|
|
|
Build U-Boot
|
|
============
|
|
$ make imx8qm_mek_defconfig
|
|
$ make flash.bin
|
|
|
|
Flash the binary into the SD card
|
|
=================================
|
|
|
|
Burn the flash.bin binary to SD card offset 32KB:
|
|
|
|
$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
|
|
|
|
Boot
|
|
====
|
|
Set Boot switch SW2: 001100.
|