u-boot/arch/arm/dts/k3-j7200.dtsi
Reid Tonking df73e791ce arm: dts: j7200: dts sync with Linux 6.6-rc1
Sync j7200 dts with Linux 6.6-rc1

- k3-j7200-r5-common-proc-board.dts now inherits from
  k3-j7200-common-proc-board.dts instead of k3-j7200-som-p0.dtsi. This
  allows us to trim down the r5 file considerably by using existing
  properties

- remove pimux nodes from r5 file

- remove duplicate nodes & node properties from r5/u-boot files

- mcu_timer0 now used instead of timer1

  mcu_timer0 device id added to dev-data.c file in order to work

- remove cpsw node

  This node is no longer required since the compatible is now fixed

- remove dummy_clock_19_2_mhz

  This node wasn't being used anyhere, so it was removed

- remove dummy_clock_200mhz

  main_sdhci0 & main_sdhci1 no longer need dummy clock for eMMC/SD

- fix secure proxy node

  mcu_secproxy changed to used secure_prxy_mcu which is already
  defined in k3-j7200-mcu-wakeup.dtsi

- removed &mcu_ringacc property override since they're present in
  v6.6-rc1

Signed-off-by: Reid Tonking <reidt@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-12 14:06:04 -04:00

164 lines
4.9 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for J7200 SoC Family
*
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
#include "k3-pinctrl.h"
/ {
model = "Texas Instruments K3 J7200 SoC";
compatible = "ti,j7200";
interrupt-parent = <&gic500>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu-map {
cluster0: cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
};
};
cpu0: cpu@0 {
compatible = "arm,cortex-a72";
reg = <0x000>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a72";
reg = <0x001>;
device_type = "cpu";
enable-method = "psci";
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
};
L2_0: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
next-level-cache = <&msmc_l3>;
};
msmc_l3: l3-cache0 {
compatible = "cache";
cache-level = <3>;
cache-unified;
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
psci: psci {
compatible = "arm,psci-1.0";
method = "smc";
};
};
a72_timer0: timer-cl0-cpu0 {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
};
pmu: pmu {
compatible = "arm,cortex-a72-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
cbass_main: bus@100000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
<0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
<0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
<0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
<0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
<0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
<0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
<0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
/* MCUSS_WKUP Range */
<0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
<0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
cbass_mcu_wakeup: bus@28380000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
<0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */
};
};
#include "k3-j7200-thermal.dtsi"
};
/* Now include the peripherals for each bus segments */
#include "k3-j7200-main.dtsi"
#include "k3-j7200-mcu-wakeup.dtsi"