u-boot/arch/arm/dts/k3-am625-sk-u-boot.dtsi
Roger Quadros 6d35682fb6 arm: dts: k3-am625-sk: Mark dependent nodes for pre-relocation phase
CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
main_conf is required for phy_gmii_sel.
Mark them as 'bootph-all' so they are available in all
pre-relocation phases.

Fixes the below dts warnings:

<stdout>: Warning (reg_format): /bus@f0000/syscon@100000/phy@4044:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (reg_format): /bus@f0000/ethernet@8000000/ethernet-ports/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (unit_address_vs_reg): /bus@f0000/syscon@100000: node has a unit name, but no reg or ranges property
<stdout>: Warning (pci_device_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
<stdout>: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/syscon@100000/phy@4044: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/syscon@100000/phy@4044: Relying on default #size-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/ethernet@8000000/ethernet-ports/port@1: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/ethernet@8000000/ethernet-ports/port@1: Relying on default #size-cells value
<stdout>: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
<stdout>: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-04 14:16:01 -04:00

170 lines
1.6 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/*
* Common AM625 SK dts file for SPLs
* Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/
*/
#include "k3-am625-sk-binman.dtsi"
/ {
chosen {
stdout-path = "serial2:115200n8";
tick-timer = &main_timer0;
};
aliases {
mmc1 = &sdhci1;
};
memory@80000000 {
bootph-all;
};
};
&main_conf {
bootph-all;
};
&cbass_main {
bootph-all;
};
&main_timer0 {
clock-frequency = <25000000>;
bootph-all;
};
&dmss {
bootph-all;
};
&secure_proxy_main {
bootph-all;
};
&dmsc {
bootph-all;
};
&k3_pds {
bootph-all;
};
&k3_clks {
bootph-all;
};
&k3_reset {
bootph-all;
};
&wkup_conf {
bootph-all;
};
&chipid {
bootph-all;
};
&main_pmx0 {
bootph-all;
};
&main_uart0 {
bootph-all;
};
&main_uart0_pins_default {
bootph-all;
};
&cbass_mcu {
bootph-all;
};
&cbass_wakeup {
bootph-all;
};
&mcu_pmx0 {
bootph-all;
};
&sdhci1 {
bootph-all;
};
&main_mmc1_pins_default {
bootph-all;
};
&fss {
bootph-all;
};
&ospi0_pins_default {
bootph-all;
};
&ospi0 {
bootph-all;
flash@0 {
bootph-all;
partitions {
bootph-all;
partition@3fc0000 {
bootph-all;
};
};
};
};
&inta_main_dmss {
bootph-all;
};
&main_pktdma {
bootph-all;
};
&cpsw3g_mdio {
bootph-all;
};
&cpsw3g_phy0 {
bootph-all;
};
&cpsw3g_phy1 {
bootph-all;
};
&main_rgmii1_pins_default {
bootph-all;
};
&main_rgmii2_pins_default {
bootph-all;
};
&phy_gmii_sel {
bootph-all;
};
&cpsw3g {
bootph-all;
ethernet-ports {
bootph-all;
};
};
&cpsw_port1 {
bootph-all;
};
&cpsw_port2 {
status = "disabled";
};