u-boot/board/sunxi/gmac.c
Chen-Yu Tsai ef7e723ba1 sunxi: Add support for using MII phy-s with the GMAC nic
Many A20 boards (ie Cubieboard2, A20-OLinuXino_MICRO) use an 100 Mbit MII
phy together with the GMAC nic found in the A20 SoC, add support for this
(this will get used when we add these boards in a later patch).

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-06 20:12:45 +01:00

43 lines
1.1 KiB
C

#include <common.h>
#include <netdev.h>
#include <miiphy.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
int sunxi_gmac_initialize(bd_t *bis)
{
int pin;
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* Set up clock gating */
setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC);
/* Set MII clock */
#ifdef CONFIG_RGMII
setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
CCM_GMAC_CTRL_GPIT_RGMII);
#else
setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII |
CCM_GMAC_CTRL_GPIT_MII);
#endif
/* Configure pin mux settings for GMAC */
for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {
#ifdef CONFIG_RGMII
/* skip unused pins in RGMII mode */
if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14))
continue;
#endif
sunxi_gpio_set_cfgpin(pin, SUN7I_GPA0_GMAC);
sunxi_gpio_set_drv(pin, 3);
}
#ifdef CONFIG_RGMII
return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII);
#else
return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII);
#endif
}