mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
70f24fa02b
Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
333 lines
6.9 KiB
Text
333 lines
6.9 KiB
Text
/*
|
|
* Copyright 2016 Free Electrons
|
|
* Copyright 2016 NextThing Co
|
|
*
|
|
* Mylène Josserand <mylene.josserand@free-electrons.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "sun5i-gr8.dtsi"
|
|
#include "sunxi-common-regulators.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "NextThing GR8-EVB";
|
|
compatible = "nextthing,gr8-evb", "nextthing,gr8";
|
|
|
|
aliases {
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 10000 0>;
|
|
enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
|
|
power-supply = <®_vcc3v3>;
|
|
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
|
|
default-brightness-level = <8>;
|
|
};
|
|
|
|
sound-analog {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "gr8-evb-wm8978";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <512>;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s0>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&wm8978>;
|
|
};
|
|
};
|
|
|
|
sound-spdif {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "On-board SPDIF";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&spdif>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&spdif_out>;
|
|
};
|
|
};
|
|
|
|
spdif_out: spdif-out {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "linux,spdif-dit";
|
|
};
|
|
};
|
|
|
|
&be0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&codec {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
axp209: pmic@34 {
|
|
reg = <0x34>;
|
|
|
|
/*
|
|
* The interrupt is routed through the "External Fast
|
|
* Interrupt Request" pin (ball G13 of the module)
|
|
* directly to the main interrupt controller, without
|
|
* any other controller interfering.
|
|
*/
|
|
interrupts = <0>;
|
|
};
|
|
};
|
|
|
|
#include "axp209.dtsi"
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
wm8978: codec@1a {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "wlf,wm8978";
|
|
reg = <0x1a>;
|
|
};
|
|
|
|
pcf8563: rtc@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ir0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ir0_rx_pin>;
|
|
status = "okay";
|
|
};
|
|
|
|
&lradc {
|
|
vref-supply = <®_ldo2>;
|
|
status = "okay";
|
|
|
|
button-190 {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
channel = <0>;
|
|
voltage = <190000>;
|
|
};
|
|
|
|
button-390 {
|
|
label = "Volume Down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
channel = <0>;
|
|
voltage = <390000>;
|
|
};
|
|
|
|
button-600 {
|
|
label = "Menu";
|
|
linux,code = <KEY_MENU>;
|
|
channel = <0>;
|
|
voltage = <600000>;
|
|
};
|
|
|
|
button-800 {
|
|
label = "Search";
|
|
linux,code = <KEY_SEARCH>;
|
|
channel = <0>;
|
|
voltage = <800000>;
|
|
};
|
|
|
|
button-980 {
|
|
label = "Home";
|
|
linux,code = <KEY_HOMEPAGE>;
|
|
channel = <0>;
|
|
voltage = <980000>;
|
|
};
|
|
|
|
button-1180 {
|
|
label = "Esc";
|
|
linux,code = <KEY_ESC>;
|
|
channel = <0>;
|
|
voltage = <1180000>;
|
|
};
|
|
|
|
button-1400 {
|
|
label = "Enter";
|
|
linux,code = <KEY_ENTER>;
|
|
channel = <0>;
|
|
voltage = <1400000>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
vmmc-supply = <®_vcc3v3>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
|
|
status = "okay";
|
|
};
|
|
|
|
&nfc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
|
|
|
|
/* MLC Support sucks for now */
|
|
status = "disabled";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&otg_sram {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm0_pin>;
|
|
status = "okay";
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-name = "vdd-cpu";
|
|
regulator-always-on;
|
|
};
|
|
|
|
®_dcdc3 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-name = "vdd-sys";
|
|
regulator-always-on;
|
|
};
|
|
|
|
®_ldo1 {
|
|
regulator-name = "vdd-rtc";
|
|
};
|
|
|
|
®_ldo2 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "avcc";
|
|
regulator-always-on;
|
|
};
|
|
|
|
®_usb1_vbus {
|
|
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rtp {
|
|
allwinner,ts-attached;
|
|
};
|
|
|
|
&spdif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spdif_tx_pin>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tve0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
/*
|
|
* The GR8-EVB has a somewhat interesting design. There's a
|
|
* pin supposed to control VBUS, an ID pin, a VBUS detect pin,
|
|
* so everything should work just fine.
|
|
*
|
|
* Except that the pin supposed to control VBUS is not
|
|
* connected to any controllable output, neither to the SoC
|
|
* through a GPIO or to the PMIC, and it is pulled down,
|
|
* meaning that we will never be able to enable VBUS on this
|
|
* board.
|
|
*/
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
|
|
usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
|
|
usb0_vbus_power-supply = <&usb_power_supply>;
|
|
usb1_vbus-supply = <®_usb1_vbus>;
|
|
status = "okay";
|
|
};
|