u-boot/include/phy_interface.h
Marek Vasut 75d28899e3 net: phy: Synchronize PHY interface modes with Linux
Synchronize PHY interface modes with Linux next 6.2.y commit:
0194b64578e90 ("net: phy: improve phy_read_poll_timeout")

Retain LX2160A/LX2162A PHY modes as those are not yet supported
by the Linux kernel, but isolate those with ifdeffery.

Isolate NCSI which are also not supported by Linux kernel. Note
that the ifdeffery cannot be avoided with IS_ENABLED() here due
to compilation of the entire conditional, which would fail in
case NCSI symbols are not available.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:20:53 +02:00

139 lines
4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2020 NXP
* Andy Fleming <afleming@gmail.com>
*
* This file pretty much stolen from Linux's mii.h/ethtool.h/phy.h
*/
#ifndef _PHY_INTERFACE_H
#define _PHY_INTERFACE_H
#include <string.h>
typedef enum {
PHY_INTERFACE_MODE_NA, /* don't touch */
PHY_INTERFACE_MODE_INTERNAL,
PHY_INTERFACE_MODE_MII,
PHY_INTERFACE_MODE_GMII,
PHY_INTERFACE_MODE_SGMII,
PHY_INTERFACE_MODE_TBI,
PHY_INTERFACE_MODE_REVMII,
PHY_INTERFACE_MODE_RMII,
PHY_INTERFACE_MODE_REVRMII,
PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_RGMII_ID,
PHY_INTERFACE_MODE_RGMII_RXID,
PHY_INTERFACE_MODE_RGMII_TXID,
PHY_INTERFACE_MODE_RTBI,
PHY_INTERFACE_MODE_SMII,
PHY_INTERFACE_MODE_XGMII,
PHY_INTERFACE_MODE_XLGMII,
PHY_INTERFACE_MODE_MOCA,
PHY_INTERFACE_MODE_QSGMII,
PHY_INTERFACE_MODE_TRGMII,
PHY_INTERFACE_MODE_100BASEX,
PHY_INTERFACE_MODE_1000BASEX,
PHY_INTERFACE_MODE_2500BASEX,
PHY_INTERFACE_MODE_5GBASER,
PHY_INTERFACE_MODE_RXAUI,
PHY_INTERFACE_MODE_XAUI,
/* 10GBASE-R, XFI, SFI - single lane 10G Serdes */
PHY_INTERFACE_MODE_10GBASER,
PHY_INTERFACE_MODE_25GBASER,
PHY_INTERFACE_MODE_USXGMII,
/* 10GBASE-KR - with Clause 73 AN */
PHY_INTERFACE_MODE_10GKR,
PHY_INTERFACE_MODE_QUSGMII,
PHY_INTERFACE_MODE_1000BASEKX,
#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
/* LX2160A SERDES modes */
PHY_INTERFACE_MODE_25G_AUI,
PHY_INTERFACE_MODE_XLAUI,
PHY_INTERFACE_MODE_CAUI2,
PHY_INTERFACE_MODE_CAUI4,
#endif
#if defined(CONFIG_PHY_NCSI)
PHY_INTERFACE_MODE_NCSI,
#endif
PHY_INTERFACE_MODE_MAX,
} phy_interface_t;
static const char * const phy_interface_strings[] = {
[PHY_INTERFACE_MODE_NA] = "",
[PHY_INTERFACE_MODE_INTERNAL] = "internal",
[PHY_INTERFACE_MODE_MII] = "mii",
[PHY_INTERFACE_MODE_GMII] = "gmii",
[PHY_INTERFACE_MODE_SGMII] = "sgmii",
[PHY_INTERFACE_MODE_TBI] = "tbi",
[PHY_INTERFACE_MODE_REVMII] = "rev-mii",
[PHY_INTERFACE_MODE_RMII] = "rmii",
[PHY_INTERFACE_MODE_REVRMII] = "rev-rmii",
[PHY_INTERFACE_MODE_RGMII] = "rgmii",
[PHY_INTERFACE_MODE_RGMII_ID] = "rgmii-id",
[PHY_INTERFACE_MODE_RGMII_RXID] = "rgmii-rxid",
[PHY_INTERFACE_MODE_RGMII_TXID] = "rgmii-txid",
[PHY_INTERFACE_MODE_RTBI] = "rtbi",
[PHY_INTERFACE_MODE_SMII] = "smii",
[PHY_INTERFACE_MODE_XGMII] = "xgmii",
[PHY_INTERFACE_MODE_XLGMII] = "xlgmii",
[PHY_INTERFACE_MODE_MOCA] = "moca",
[PHY_INTERFACE_MODE_QSGMII] = "qsgmii",
[PHY_INTERFACE_MODE_TRGMII] = "trgmii",
[PHY_INTERFACE_MODE_1000BASEX] = "1000base-x",
[PHY_INTERFACE_MODE_1000BASEKX] = "1000base-kx",
[PHY_INTERFACE_MODE_2500BASEX] = "2500base-x",
[PHY_INTERFACE_MODE_5GBASER] = "5gbase-r",
[PHY_INTERFACE_MODE_RXAUI] = "rxaui",
[PHY_INTERFACE_MODE_XAUI] = "xaui",
[PHY_INTERFACE_MODE_10GBASER] = "10gbase-r",
[PHY_INTERFACE_MODE_25GBASER] = "25gbase-r",
[PHY_INTERFACE_MODE_USXGMII] = "usxgmii",
[PHY_INTERFACE_MODE_10GKR] = "10gbase-kr",
[PHY_INTERFACE_MODE_100BASEX] = "100base-x",
[PHY_INTERFACE_MODE_QUSGMII] = "qusgmii",
#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
/* LX2160A SERDES modes */
[PHY_INTERFACE_MODE_25G_AUI] = "25g-aui",
[PHY_INTERFACE_MODE_XLAUI] = "xlaui4",
[PHY_INTERFACE_MODE_CAUI2] = "caui2",
[PHY_INTERFACE_MODE_CAUI4] = "caui4",
#endif
#if defined(CONFIG_PHY_NCSI)
[PHY_INTERFACE_MODE_NCSI] = "NC-SI",
#endif
};
/* Backplane modes:
* are considered a sub-type of phy_interface_t: XGMII
* and are specified in "phy-connection-type" with one of the following strings
*/
static const char * const backplane_mode_strings[] = {
"10gbase-kr",
"40gbase-kr4",
};
static inline const char *phy_string_for_interface(phy_interface_t i)
{
/* Default to unknown */
if (i >= PHY_INTERFACE_MODE_MAX)
i = PHY_INTERFACE_MODE_NA;
return phy_interface_strings[i];
}
static inline bool is_backplane_mode(const char *phyconn)
{
int i;
if (!phyconn)
return false;
for (i = 0; i < ARRAY_SIZE(backplane_mode_strings); i++) {
if (!strcmp(phyconn, backplane_mode_strings[i]))
return true;
}
return false;
}
#endif /* _PHY_INTERFACE_H */