mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
dd11fdc31f
Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
103 lines
3 KiB
C
103 lines
3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2013-2019 Toradex, Inc.
|
|
*
|
|
* Configuration settings for the Toradex Apalis iMX6
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <linux/stringify.h>
|
|
|
|
#include "mx6_common.h"
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/mach-imx/gpio.h>
|
|
|
|
#define CFG_MXC_UART_BASE UART1_BASE
|
|
|
|
/* MMC Configs */
|
|
#define CFG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CFG_SYS_FSL_USDHC_NUM 3
|
|
|
|
/* Network */
|
|
#define PHY_ANEG_TIMEOUT 15000 /* PHY needs longer aneg time */
|
|
|
|
/* USB Configs */
|
|
/* Host */
|
|
#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CFG_MXC_USB_FLAGS 0
|
|
|
|
/* Framebuffer and LCD */
|
|
|
|
/* Command definition */
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 1) \
|
|
func(MMC, mmc, 2) \
|
|
func(MMC, mmc, 0) \
|
|
func(USB, usb, 0) \
|
|
func(DHCP, dhcp, na)
|
|
#include <config_distro_bootcmd.h>
|
|
#undef BOOTENV_RUN_NET_USB_START
|
|
#define BOOTENV_RUN_NET_USB_START ""
|
|
|
|
#define UBOOT_UPDATE \
|
|
"uboot_hwpart=1\0" \
|
|
"uboot_blk=8a\0" \
|
|
"uboot_spl_blk=2\0" \
|
|
"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
|
|
"setexpr blkcnt ${blkcnt} / 0x200\0" \
|
|
"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
|
|
"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
|
|
"update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
|
|
"mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
|
|
|
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
|
"bootm_size=0x20000000\0" \
|
|
"fdt_addr_r=0x18200000\0" \
|
|
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
|
|
"pxefile_addr_r=0x18300000\0" \
|
|
"ramdisk_addr_r=0x18400000\0" \
|
|
"scriptaddr=0x18280000\0"
|
|
|
|
#define CFG_EXTRA_ENV_SETTINGS \
|
|
BOOTENV \
|
|
"boot_file=zImage\0" \
|
|
"boot_script_dhcp=boot.scr\0" \
|
|
"console=ttymxc0\0" \
|
|
"defargs=enable_wait_mode=off vmalloc=400M\0" \
|
|
"fdt_board=eval\0" \
|
|
"fdt_fixup=;\0" \
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
|
UBOOT_UPDATE \
|
|
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
|
|
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
|
|
"flash_eth.img && source ${loadaddr}\0" \
|
|
"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
|
|
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
|
|
"|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \
|
|
" ${loadaddr} flash_blk.img && " \
|
|
"source ${loadaddr}\0" \
|
|
"setup=setenv setupargs fec_mac=${ethaddr} " \
|
|
"consoleblank=0 no_console_suspend=1 console=tty1 " \
|
|
"console=${console},${baudrate}n8\0 " \
|
|
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
|
|
"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
|
|
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
|
|
"source ${loadaddr}\0" \
|
|
"splashpos=m,m\0" \
|
|
"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
|
|
"vidargs=mxc_hdmi.only_cea=1 fbmem=32M\0"
|
|
|
|
/* Miscellaneous configurable options */
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#endif /* __CONFIG_H */
|