mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
5b8031ccb4
In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
371 lines
9.7 KiB
C
371 lines
9.7 KiB
C
/******************************************************************
|
|
* Copyright 2008 Mentor Graphics Corporation
|
|
* Copyright (C) 2008 by Texas Instruments
|
|
*
|
|
* This file is part of the Inventra Controller Driver for Linux.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
******************************************************************/
|
|
|
|
#ifndef __MUSB_HDRC_DEFS_H__
|
|
#define __MUSB_HDRC_DEFS_H__
|
|
|
|
#include <usb_defs.h>
|
|
#include <asm/io.h>
|
|
|
|
#ifdef CONFIG_USB_BLACKFIN
|
|
# include "blackfin_usb.h"
|
|
#endif
|
|
|
|
#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */
|
|
|
|
/* EP0 */
|
|
struct musb_ep0_regs {
|
|
u16 reserved4;
|
|
u16 csr0;
|
|
u16 reserved5;
|
|
u16 reserved6;
|
|
u16 count0;
|
|
u8 host_type0;
|
|
u8 host_naklimit0;
|
|
u8 reserved7;
|
|
u8 reserved8;
|
|
u8 reserved9;
|
|
u8 configdata;
|
|
};
|
|
|
|
/* EP 1-15 */
|
|
struct musb_epN_regs {
|
|
u16 txmaxp;
|
|
u16 txcsr;
|
|
u16 rxmaxp;
|
|
u16 rxcsr;
|
|
u16 rxcount;
|
|
u8 txtype;
|
|
u8 txinterval;
|
|
u8 rxtype;
|
|
u8 rxinterval;
|
|
u8 reserved0;
|
|
u8 fifosize;
|
|
};
|
|
|
|
/* Mentor USB core register overlay structure */
|
|
#ifndef musb_regs
|
|
struct musb_regs {
|
|
/* common registers */
|
|
u8 faddr;
|
|
u8 power;
|
|
u16 intrtx;
|
|
u16 intrrx;
|
|
u16 intrtxe;
|
|
u16 intrrxe;
|
|
u8 intrusb;
|
|
u8 intrusbe;
|
|
u16 frame;
|
|
u8 index;
|
|
u8 testmode;
|
|
/* indexed registers */
|
|
u16 txmaxp;
|
|
u16 txcsr;
|
|
u16 rxmaxp;
|
|
u16 rxcsr;
|
|
u16 rxcount;
|
|
u8 txtype;
|
|
u8 txinterval;
|
|
u8 rxtype;
|
|
u8 rxinterval;
|
|
u8 reserved0;
|
|
u8 fifosize;
|
|
/* fifo */
|
|
u32 fifox[16];
|
|
/* OTG, dynamic FIFO, version & vendor registers */
|
|
u8 devctl;
|
|
u8 reserved1;
|
|
u8 txfifosz;
|
|
u8 rxfifosz;
|
|
u16 txfifoadd;
|
|
u16 rxfifoadd;
|
|
u32 vcontrol;
|
|
u16 hwvers;
|
|
u16 reserved2a[1];
|
|
u8 ulpi_busctl;
|
|
u8 reserved2b[1];
|
|
u16 reserved2[3];
|
|
u8 epinfo;
|
|
u8 raminfo;
|
|
u8 linkinfo;
|
|
u8 vplen;
|
|
u8 hseof1;
|
|
u8 fseof1;
|
|
u8 lseof1;
|
|
u8 reserved3;
|
|
/* target address registers */
|
|
struct musb_tar_regs {
|
|
u8 txfuncaddr;
|
|
u8 reserved0;
|
|
u8 txhubaddr;
|
|
u8 txhubport;
|
|
u8 rxfuncaddr;
|
|
u8 reserved1;
|
|
u8 rxhubaddr;
|
|
u8 rxhubport;
|
|
} tar[16];
|
|
/*
|
|
* endpoint registers
|
|
* ep0 elements are valid when array index is 0
|
|
* otherwise epN is valid
|
|
*/
|
|
union musb_ep_regs {
|
|
struct musb_ep0_regs ep0;
|
|
struct musb_epN_regs epN;
|
|
} ep[16];
|
|
|
|
} __attribute__((packed));
|
|
#endif
|
|
|
|
/*
|
|
* MUSB Register bits
|
|
*/
|
|
|
|
/* POWER */
|
|
#define MUSB_POWER_ISOUPDATE 0x80
|
|
#define MUSB_POWER_SOFTCONN 0x40
|
|
#define MUSB_POWER_HSENAB 0x20
|
|
#define MUSB_POWER_HSMODE 0x10
|
|
#define MUSB_POWER_RESET 0x08
|
|
#define MUSB_POWER_RESUME 0x04
|
|
#define MUSB_POWER_SUSPENDM 0x02
|
|
#define MUSB_POWER_ENSUSPEND 0x01
|
|
#define MUSB_POWER_HSMODE_SHIFT 4
|
|
|
|
/* INTRUSB */
|
|
#define MUSB_INTR_SUSPEND 0x01
|
|
#define MUSB_INTR_RESUME 0x02
|
|
#define MUSB_INTR_RESET 0x04
|
|
#define MUSB_INTR_BABBLE 0x04
|
|
#define MUSB_INTR_SOF 0x08
|
|
#define MUSB_INTR_CONNECT 0x10
|
|
#define MUSB_INTR_DISCONNECT 0x20
|
|
#define MUSB_INTR_SESSREQ 0x40
|
|
#define MUSB_INTR_VBUSERROR 0x80 /* For SESSION end */
|
|
|
|
/* DEVCTL */
|
|
#define MUSB_DEVCTL_BDEVICE 0x80
|
|
#define MUSB_DEVCTL_FSDEV 0x40
|
|
#define MUSB_DEVCTL_LSDEV 0x20
|
|
#define MUSB_DEVCTL_VBUS 0x18
|
|
#define MUSB_DEVCTL_VBUS_SHIFT 3
|
|
#define MUSB_DEVCTL_HM 0x04
|
|
#define MUSB_DEVCTL_HR 0x02
|
|
#define MUSB_DEVCTL_SESSION 0x01
|
|
|
|
/* ULPI VBUSCONTROL */
|
|
#define ULPI_USE_EXTVBUS 0x01
|
|
#define ULPI_USE_EXTVBUSIND 0x02
|
|
|
|
/* TESTMODE */
|
|
#define MUSB_TEST_FORCE_HOST 0x80
|
|
#define MUSB_TEST_FIFO_ACCESS 0x40
|
|
#define MUSB_TEST_FORCE_FS 0x20
|
|
#define MUSB_TEST_FORCE_HS 0x10
|
|
#define MUSB_TEST_PACKET 0x08
|
|
#define MUSB_TEST_K 0x04
|
|
#define MUSB_TEST_J 0x02
|
|
#define MUSB_TEST_SE0_NAK 0x01
|
|
|
|
/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
|
|
#define MUSB_FIFOSZ_DPB 0x10
|
|
/* Allocation size (8, 16, 32, ... 4096) */
|
|
#define MUSB_FIFOSZ_SIZE 0x0f
|
|
|
|
/* CSR0 */
|
|
#define MUSB_CSR0_FLUSHFIFO 0x0100
|
|
#define MUSB_CSR0_TXPKTRDY 0x0002
|
|
#define MUSB_CSR0_RXPKTRDY 0x0001
|
|
|
|
/* CSR0 in Peripheral mode */
|
|
#define MUSB_CSR0_P_SVDSETUPEND 0x0080
|
|
#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
|
|
#define MUSB_CSR0_P_SENDSTALL 0x0020
|
|
#define MUSB_CSR0_P_SETUPEND 0x0010
|
|
#define MUSB_CSR0_P_DATAEND 0x0008
|
|
#define MUSB_CSR0_P_SENTSTALL 0x0004
|
|
|
|
/* CSR0 in Host mode */
|
|
#define MUSB_CSR0_H_DIS_PING 0x0800
|
|
#define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */
|
|
#define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control */
|
|
#define MUSB_CSR0_H_NAKTIMEOUT 0x0080
|
|
#define MUSB_CSR0_H_STATUSPKT 0x0040
|
|
#define MUSB_CSR0_H_REQPKT 0x0020
|
|
#define MUSB_CSR0_H_ERROR 0x0010
|
|
#define MUSB_CSR0_H_SETUPPKT 0x0008
|
|
#define MUSB_CSR0_H_RXSTALL 0x0004
|
|
|
|
/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
|
|
#define MUSB_CSR0_P_WZC_BITS \
|
|
(MUSB_CSR0_P_SENTSTALL)
|
|
#define MUSB_CSR0_H_WZC_BITS \
|
|
(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
|
|
| MUSB_CSR0_RXPKTRDY)
|
|
|
|
/* TxType/RxType */
|
|
#define MUSB_TYPE_SPEED 0xc0
|
|
#define MUSB_TYPE_SPEED_SHIFT 6
|
|
#define MUSB_TYPE_SPEED_HIGH 1
|
|
#define MUSB_TYPE_SPEED_FULL 2
|
|
#define MUSB_TYPE_SPEED_LOW 3
|
|
#define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */
|
|
#define MUSB_TYPE_PROTO_SHIFT 4
|
|
#define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */
|
|
#define MUSB_TYPE_PROTO_BULK 2
|
|
#define MUSB_TYPE_PROTO_INTR 3
|
|
|
|
/* CONFIGDATA */
|
|
#define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */
|
|
#define MUSB_CONFIGDATA_MPTXE 0x40 /* Auto bulk pkt splitting */
|
|
#define MUSB_CONFIGDATA_BIGENDIAN 0x20
|
|
#define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */
|
|
#define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */
|
|
#define MUSB_CONFIGDATA_DYNFIFO 0x04 /* Dynamic FIFO sizing */
|
|
#define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */
|
|
#define MUSB_CONFIGDATA_UTMIDW 0x01 /* Data width 0/1 => 8/16bits */
|
|
|
|
/* TXCSR in Peripheral and Host mode */
|
|
#define MUSB_TXCSR_AUTOSET 0x8000
|
|
#define MUSB_TXCSR_MODE 0x2000
|
|
#define MUSB_TXCSR_DMAENAB 0x1000
|
|
#define MUSB_TXCSR_FRCDATATOG 0x0800
|
|
#define MUSB_TXCSR_DMAMODE 0x0400
|
|
#define MUSB_TXCSR_CLRDATATOG 0x0040
|
|
#define MUSB_TXCSR_FLUSHFIFO 0x0008
|
|
#define MUSB_TXCSR_FIFONOTEMPTY 0x0002
|
|
#define MUSB_TXCSR_TXPKTRDY 0x0001
|
|
|
|
/* TXCSR in Peripheral mode */
|
|
#define MUSB_TXCSR_P_ISO 0x4000
|
|
#define MUSB_TXCSR_P_INCOMPTX 0x0080
|
|
#define MUSB_TXCSR_P_SENTSTALL 0x0020
|
|
#define MUSB_TXCSR_P_SENDSTALL 0x0010
|
|
#define MUSB_TXCSR_P_UNDERRUN 0x0004
|
|
|
|
/* TXCSR in Host mode */
|
|
#define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200
|
|
#define MUSB_TXCSR_H_DATATOGGLE 0x0100
|
|
#define MUSB_TXCSR_H_NAKTIMEOUT 0x0080
|
|
#define MUSB_TXCSR_H_RXSTALL 0x0020
|
|
#define MUSB_TXCSR_H_ERROR 0x0004
|
|
#define MUSB_TXCSR_H_DATATOGGLE_SHIFT 8
|
|
|
|
/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
|
|
#define MUSB_TXCSR_P_WZC_BITS \
|
|
(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
|
|
| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
|
|
#define MUSB_TXCSR_H_WZC_BITS \
|
|
(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
|
|
| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
|
|
|
|
/* RXCSR in Peripheral and Host mode */
|
|
#define MUSB_RXCSR_AUTOCLEAR 0x8000
|
|
#define MUSB_RXCSR_DMAENAB 0x2000
|
|
#define MUSB_RXCSR_DISNYET 0x1000
|
|
#define MUSB_RXCSR_PID_ERR 0x1000
|
|
#define MUSB_RXCSR_DMAMODE 0x0800
|
|
#define MUSB_RXCSR_INCOMPRX 0x0100
|
|
#define MUSB_RXCSR_CLRDATATOG 0x0080
|
|
#define MUSB_RXCSR_FLUSHFIFO 0x0010
|
|
#define MUSB_RXCSR_DATAERROR 0x0008
|
|
#define MUSB_RXCSR_FIFOFULL 0x0002
|
|
#define MUSB_RXCSR_RXPKTRDY 0x0001
|
|
|
|
/* RXCSR in Peripheral mode */
|
|
#define MUSB_RXCSR_P_ISO 0x4000
|
|
#define MUSB_RXCSR_P_SENTSTALL 0x0040
|
|
#define MUSB_RXCSR_P_SENDSTALL 0x0020
|
|
#define MUSB_RXCSR_P_OVERRUN 0x0004
|
|
|
|
/* RXCSR in Host mode */
|
|
#define MUSB_RXCSR_H_AUTOREQ 0x4000
|
|
#define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400
|
|
#define MUSB_RXCSR_H_DATATOGGLE 0x0200
|
|
#define MUSB_RXCSR_H_RXSTALL 0x0040
|
|
#define MUSB_RXCSR_H_REQPKT 0x0020
|
|
#define MUSB_RXCSR_H_ERROR 0x0004
|
|
#define MUSB_S_RXCSR_H_DATATOGGLE 9
|
|
|
|
/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
|
|
#define MUSB_RXCSR_P_WZC_BITS \
|
|
(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
|
|
| MUSB_RXCSR_RXPKTRDY)
|
|
#define MUSB_RXCSR_H_WZC_BITS \
|
|
(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
|
|
| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
|
|
|
|
/* HUBADDR */
|
|
#define MUSB_HUBADDR_MULTI_TT 0x80
|
|
|
|
/* Endpoint configuration information. Note: The value of endpoint fifo size
|
|
* element should be either 8,16,32,64,128,256,512,1024,2048 or 4096. Other
|
|
* values are not supported
|
|
*/
|
|
struct musb_epinfo {
|
|
u8 epnum; /* endpoint number */
|
|
u8 epdir; /* endpoint direction */
|
|
u16 epsize; /* endpoint FIFO size */
|
|
};
|
|
|
|
/*
|
|
* Platform specific MUSB configuration. Any platform using the musb
|
|
* functionality should create one instance of this structure in the
|
|
* platform specific file.
|
|
*/
|
|
struct musb_config {
|
|
struct musb_regs *regs;
|
|
u32 timeout;
|
|
u8 musb_speed;
|
|
u8 extvbus;
|
|
};
|
|
|
|
/* externally defined data */
|
|
extern struct musb_config musb_cfg;
|
|
extern struct musb_regs *musbr;
|
|
|
|
/* exported functions */
|
|
extern void musb_start(void);
|
|
extern void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt);
|
|
extern void write_fifo(u8 ep, u32 length, void *fifo_data);
|
|
extern void read_fifo(u8 ep, u32 length, void *fifo_data);
|
|
|
|
#if defined(CONFIG_USB_BLACKFIN)
|
|
/* Every USB register is accessed as a 16-bit even if the value itself
|
|
* is only 8-bits in size. Fun stuff.
|
|
*/
|
|
# undef readb
|
|
# define readb(addr) (u8)bfin_read16(addr)
|
|
# undef writeb
|
|
# define writeb(b, addr) bfin_write16(addr, b)
|
|
# undef MUSB_TXCSR_MODE /* not supported */
|
|
# define MUSB_TXCSR_MODE 0
|
|
/*
|
|
* The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY.
|
|
* However, it has no ULPI support - so there are no registers at all.
|
|
* That means accesses to ULPI_BUSCONTROL have to be abstracted away.
|
|
*/
|
|
static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val)
|
|
{}
|
|
#else
|
|
static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
|
|
{
|
|
return readb(&musbr->ulpi_busctl);
|
|
}
|
|
static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val)
|
|
{
|
|
writeb(val, &musbr->ulpi_busctl);
|
|
}
|
|
#endif
|
|
|
|
#endif /* __MUSB_HDRC_DEFS_H__ */
|