mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
d4f847ecd7
Adjust this driver to support driver model for Ethernet. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
941 lines
25 KiB
C
941 lines
25 KiB
C
/*
|
|
* Copyright (c) 2013 Gerhard Sittig <gsi@denx.de>
|
|
* based on the U-Boot Asix driver as well as information
|
|
* from the Linux Moschip driver
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* MOSCHIP MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <linux/mii.h>
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <usb.h>
|
|
|
|
#include "usb_ether.h"
|
|
|
|
#define MCS7830_BASE_NAME "mcs"
|
|
|
|
#define USBCALL_TIMEOUT 1000
|
|
#define LINKSTATUS_TIMEOUT 5000 /* link status, connect timeout */
|
|
#define LINKSTATUS_TIMEOUT_RES 50 /* link status, resolution in msec */
|
|
|
|
#define MCS7830_RX_URB_SIZE 2048
|
|
|
|
/* command opcodes */
|
|
#define MCS7830_WR_BREQ 0x0d
|
|
#define MCS7830_RD_BREQ 0x0e
|
|
|
|
/* register layout, numerical offset specs for USB API calls */
|
|
struct mcs7830_regs {
|
|
uint8_t multicast_hashes[8];
|
|
uint8_t packet_gap[2];
|
|
uint8_t phy_data[2];
|
|
uint8_t phy_command[2];
|
|
uint8_t configuration;
|
|
uint8_t ether_address[6];
|
|
uint8_t frame_drop_count;
|
|
uint8_t pause_threshold;
|
|
};
|
|
#define REG_MULTICAST_HASH offsetof(struct mcs7830_regs, multicast_hashes)
|
|
#define REG_PHY_DATA offsetof(struct mcs7830_regs, phy_data)
|
|
#define REG_PHY_CMD offsetof(struct mcs7830_regs, phy_command)
|
|
#define REG_CONFIG offsetof(struct mcs7830_regs, configuration)
|
|
#define REG_ETHER_ADDR offsetof(struct mcs7830_regs, ether_address)
|
|
#define REG_FRAME_DROP_COUNTER offsetof(struct mcs7830_regs, frame_drop_count)
|
|
#define REG_PAUSE_THRESHOLD offsetof(struct mcs7830_regs, pause_threshold)
|
|
|
|
/* bit masks and default values for the above registers */
|
|
#define PHY_CMD1_READ 0x40
|
|
#define PHY_CMD1_WRITE 0x20
|
|
#define PHY_CMD1_PHYADDR 0x01
|
|
|
|
#define PHY_CMD2_PEND 0x80
|
|
#define PHY_CMD2_READY 0x40
|
|
|
|
#define CONF_CFG 0x80
|
|
#define CONF_SPEED100 0x40
|
|
#define CONF_FDX_ENABLE 0x20
|
|
#define CONF_RXENABLE 0x10
|
|
#define CONF_TXENABLE 0x08
|
|
#define CONF_SLEEPMODE 0x04
|
|
#define CONF_ALLMULTICAST 0x02
|
|
#define CONF_PROMISCUOUS 0x01
|
|
|
|
#define PAUSE_THRESHOLD_DEFAULT 0
|
|
|
|
/* bit masks for the status byte which follows received ethernet frames */
|
|
#define STAT_RX_FRAME_CORRECT 0x20
|
|
#define STAT_RX_LARGE_FRAME 0x10
|
|
#define STAT_RX_CRC_ERROR 0x08
|
|
#define STAT_RX_ALIGNMENT_ERROR 0x04
|
|
#define STAT_RX_LENGTH_ERROR 0x02
|
|
#define STAT_RX_SHORT_FRAME 0x01
|
|
|
|
/*
|
|
* struct mcs7830_private - private driver data for an individual adapter
|
|
* @config: shadow for the network adapter's configuration register
|
|
* @mchash: shadow for the network adapter's multicast hash registers
|
|
*/
|
|
struct mcs7830_private {
|
|
#ifdef CONFIG_DM_ETH
|
|
uint8_t rx_buf[MCS7830_RX_URB_SIZE];
|
|
struct ueth_data ueth;
|
|
#endif
|
|
uint8_t config;
|
|
uint8_t mchash[8];
|
|
};
|
|
|
|
/*
|
|
* mcs7830_read_reg() - read a register of the network adapter
|
|
* @udev: network device to read from
|
|
* @idx: index of the register to start reading from
|
|
* @size: number of bytes to read
|
|
* @data: buffer to read into
|
|
* Return: zero upon success, negative upon error
|
|
*/
|
|
static int mcs7830_read_reg(struct usb_device *udev, uint8_t idx,
|
|
uint16_t size, void *data)
|
|
{
|
|
int len;
|
|
ALLOC_CACHE_ALIGN_BUFFER(uint8_t, buf, size);
|
|
|
|
debug("%s() idx=0x%04X sz=%d\n", __func__, idx, size);
|
|
|
|
len = usb_control_msg(udev,
|
|
usb_rcvctrlpipe(udev, 0),
|
|
MCS7830_RD_BREQ,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0, idx, buf, size,
|
|
USBCALL_TIMEOUT);
|
|
if (len != size) {
|
|
debug("%s() len=%d != sz=%d\n", __func__, len, size);
|
|
return -EIO;
|
|
}
|
|
memcpy(data, buf, size);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_write_reg() - write a register of the network adapter
|
|
* @udev: network device to write to
|
|
* @idx: index of the register to start writing to
|
|
* @size: number of bytes to write
|
|
* @data: buffer holding the data to write
|
|
* Return: zero upon success, negative upon error
|
|
*/
|
|
static int mcs7830_write_reg(struct usb_device *udev, uint8_t idx,
|
|
uint16_t size, void *data)
|
|
{
|
|
int len;
|
|
ALLOC_CACHE_ALIGN_BUFFER(uint8_t, buf, size);
|
|
|
|
debug("%s() idx=0x%04X sz=%d\n", __func__, idx, size);
|
|
|
|
memcpy(buf, data, size);
|
|
len = usb_control_msg(udev,
|
|
usb_sndctrlpipe(udev, 0),
|
|
MCS7830_WR_BREQ,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0, idx, buf, size,
|
|
USBCALL_TIMEOUT);
|
|
if (len != size) {
|
|
debug("%s() len=%d != sz=%d\n", __func__, len, size);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_phy_emit_wait() - emit PHY read/write access, wait for its execution
|
|
* @udev: network device to talk to
|
|
* @rwflag: PHY_CMD1_READ or PHY_CMD1_WRITE opcode
|
|
* @index: number of the PHY register to read or write
|
|
* Return: zero upon success, negative upon error
|
|
*/
|
|
static int mcs7830_phy_emit_wait(struct usb_device *udev,
|
|
uint8_t rwflag, uint8_t index)
|
|
{
|
|
int rc;
|
|
int retry;
|
|
uint8_t cmd[2];
|
|
|
|
/* send the PHY read/write request */
|
|
cmd[0] = rwflag | PHY_CMD1_PHYADDR;
|
|
cmd[1] = PHY_CMD2_PEND | (index & 0x1f);
|
|
rc = mcs7830_write_reg(udev, REG_PHY_CMD, sizeof(cmd), cmd);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* wait for the response to become available (usually < 1ms) */
|
|
retry = 10;
|
|
do {
|
|
rc = mcs7830_read_reg(udev, REG_PHY_CMD, sizeof(cmd), cmd);
|
|
if (rc < 0)
|
|
return rc;
|
|
if (cmd[1] & PHY_CMD2_READY)
|
|
return 0;
|
|
if (!retry--)
|
|
return -ETIMEDOUT;
|
|
mdelay(1);
|
|
} while (1);
|
|
/* UNREACH */
|
|
}
|
|
|
|
/*
|
|
* mcs7830_read_phy() - read a PHY register of the network adapter
|
|
* @udev: network device to read from
|
|
* @index: index of the PHY register to read from
|
|
* Return: non-negative 16bit register content, negative upon error
|
|
*/
|
|
static int mcs7830_read_phy(struct usb_device *udev, uint8_t index)
|
|
{
|
|
int rc;
|
|
uint16_t val;
|
|
|
|
/* issue the PHY read request and wait for its execution */
|
|
rc = mcs7830_phy_emit_wait(udev, PHY_CMD1_READ, index);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* fetch the PHY data which was read */
|
|
rc = mcs7830_read_reg(udev, REG_PHY_DATA, sizeof(val), &val);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = le16_to_cpu(val);
|
|
debug("%s(%d) => 0x%04X\n", __func__, index, rc);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_write_phy() - write a PHY register of the network adapter
|
|
* @udev: network device to write to
|
|
* @index: index of the PHY register to write to
|
|
* @val: value to write to the PHY register
|
|
* Return: zero upon success, negative upon error
|
|
*/
|
|
static int mcs7830_write_phy(struct usb_device *udev, uint8_t index,
|
|
uint16_t val)
|
|
{
|
|
int rc;
|
|
|
|
debug("%s(%d, 0x%04X)\n", __func__, index, val);
|
|
|
|
/* setup the PHY data which is to get written */
|
|
val = cpu_to_le16(val);
|
|
rc = mcs7830_write_reg(udev, REG_PHY_DATA, sizeof(val), &val);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* issue the PHY write request and wait for its execution */
|
|
rc = mcs7830_phy_emit_wait(udev, PHY_CMD1_WRITE, index);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_write_config() - write to the network adapter's config register
|
|
* @udev: network device to write to
|
|
* @priv: private data
|
|
* Return: zero upon success, negative upon error
|
|
*
|
|
* the data which gets written is taken from the shadow config register
|
|
* within the device driver's private data
|
|
*/
|
|
static int mcs7830_write_config(struct usb_device *udev,
|
|
struct mcs7830_private *priv)
|
|
{
|
|
int rc;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
rc = mcs7830_write_reg(udev, REG_CONFIG,
|
|
sizeof(priv->config), &priv->config);
|
|
if (rc < 0) {
|
|
debug("writing config to adapter failed\n");
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_write_mchash() - write the network adapter's multicast filter
|
|
* @udev: network device to write to
|
|
* @priv: private data
|
|
* Return: zero upon success, negative upon error
|
|
*
|
|
* the data which gets written is taken from the shadow multicast hashes
|
|
* within the device driver's private data
|
|
*/
|
|
static int mcs7830_write_mchash(struct usb_device *udev,
|
|
struct mcs7830_private *priv)
|
|
{
|
|
int rc;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
rc = mcs7830_write_reg(udev, REG_MULTICAST_HASH,
|
|
sizeof(priv->mchash), &priv->mchash);
|
|
if (rc < 0) {
|
|
debug("writing multicast hash to adapter failed\n");
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_set_autoneg() - setup and trigger ethernet link autonegotiation
|
|
* @udev: network device to run link negotiation on
|
|
* Return: zero upon success, negative upon error
|
|
*
|
|
* the routine advertises available media and starts autonegotiation
|
|
*/
|
|
static int mcs7830_set_autoneg(struct usb_device *udev)
|
|
{
|
|
int adv, flg;
|
|
int rc;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
/*
|
|
* algorithm taken from the Linux driver, which took it from
|
|
* "the original mcs7830 version 1.4 driver":
|
|
*
|
|
* enable all media, reset BMCR, enable auto neg, restart
|
|
* auto neg while keeping the enable auto neg flag set
|
|
*/
|
|
|
|
adv = ADVERTISE_PAUSE_CAP | ADVERTISE_ALL | ADVERTISE_CSMA;
|
|
rc = mcs7830_write_phy(udev, MII_ADVERTISE, adv);
|
|
|
|
flg = 0;
|
|
if (!rc)
|
|
rc = mcs7830_write_phy(udev, MII_BMCR, flg);
|
|
|
|
flg |= BMCR_ANENABLE;
|
|
if (!rc)
|
|
rc = mcs7830_write_phy(udev, MII_BMCR, flg);
|
|
|
|
flg |= BMCR_ANRESTART;
|
|
if (!rc)
|
|
rc = mcs7830_write_phy(udev, MII_BMCR, flg);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_get_rev() - identify a network adapter's chip revision
|
|
* @udev: network device to identify
|
|
* Return: non-negative number, reflecting the revision number
|
|
*
|
|
* currently, only "rev C and higher" and "below rev C" are needed, so
|
|
* the return value is #1 for "below rev C", and #2 for "rev C and above"
|
|
*/
|
|
static int mcs7830_get_rev(struct usb_device *udev)
|
|
{
|
|
uint8_t buf[2];
|
|
int rc;
|
|
int rev;
|
|
|
|
/* register 22 is readable in rev C and higher */
|
|
rc = mcs7830_read_reg(udev, REG_FRAME_DROP_COUNTER, sizeof(buf), buf);
|
|
if (rc < 0)
|
|
rev = 1;
|
|
else
|
|
rev = 2;
|
|
debug("%s() rc=%d, rev=%d\n", __func__, rc, rev);
|
|
return rev;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_apply_fixup() - identify an adapter and potentially apply fixups
|
|
* @udev: network device to identify and apply fixups to
|
|
* Return: zero upon success (no errors emitted from here)
|
|
*
|
|
* this routine identifies the network adapter's chip revision, and applies
|
|
* fixups for known issues
|
|
*/
|
|
static int mcs7830_apply_fixup(struct usb_device *udev)
|
|
{
|
|
int rev;
|
|
int i;
|
|
uint8_t thr;
|
|
|
|
rev = mcs7830_get_rev(udev);
|
|
debug("%s() rev=%d\n", __func__, rev);
|
|
|
|
/*
|
|
* rev C requires setting the pause threshold (the Linux driver
|
|
* is inconsistent, the implementation does it for "rev C
|
|
* exactly", the introductory comment says "rev C and above")
|
|
*/
|
|
if (rev == 2) {
|
|
debug("%s: applying rev C fixup\n", __func__);
|
|
thr = PAUSE_THRESHOLD_DEFAULT;
|
|
for (i = 0; i < 2; i++) {
|
|
(void)mcs7830_write_reg(udev, REG_PAUSE_THRESHOLD,
|
|
sizeof(thr), &thr);
|
|
mdelay(1);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_basic_reset() - bring the network adapter into a known first state
|
|
* @eth: network device to act upon
|
|
* Return: zero upon success, negative upon error
|
|
*
|
|
* this routine initializes the network adapter such that subsequent invocations
|
|
* of the interface callbacks can exchange ethernet frames; link negotiation is
|
|
* triggered from here already and continues in background
|
|
*/
|
|
static int mcs7830_basic_reset(struct usb_device *udev,
|
|
struct mcs7830_private *priv)
|
|
{
|
|
int rc;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
/*
|
|
* comment from the respective Linux driver, which
|
|
* unconditionally sets the ALLMULTICAST flag as well:
|
|
* should not be needed, but does not work otherwise
|
|
*/
|
|
priv->config = CONF_TXENABLE;
|
|
priv->config |= CONF_ALLMULTICAST;
|
|
|
|
rc = mcs7830_set_autoneg(udev);
|
|
if (rc < 0) {
|
|
error("setting autoneg failed\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = mcs7830_write_mchash(udev, priv);
|
|
if (rc < 0) {
|
|
error("failed to set multicast hash\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = mcs7830_write_config(udev, priv);
|
|
if (rc < 0) {
|
|
error("failed to set configuration\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = mcs7830_apply_fixup(udev);
|
|
if (rc < 0) {
|
|
error("fixup application failed\n");
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_read_mac() - read an ethernet adapter's MAC address
|
|
* @udev: network device to read from
|
|
* @enetaddr: place to put ethernet MAC address
|
|
* Return: zero upon success, negative upon error
|
|
*
|
|
* this routine fetches the MAC address stored within the ethernet adapter,
|
|
* and stores it in the ethernet interface's data structure
|
|
*/
|
|
static int mcs7830_read_mac(struct usb_device *udev, unsigned char enetaddr[])
|
|
{
|
|
int rc;
|
|
uint8_t buf[ETH_ALEN];
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
rc = mcs7830_read_reg(udev, REG_ETHER_ADDR, ETH_ALEN, buf);
|
|
if (rc < 0) {
|
|
debug("reading MAC from adapter failed\n");
|
|
return rc;
|
|
}
|
|
|
|
memcpy(enetaddr, buf, ETH_ALEN);
|
|
return 0;
|
|
}
|
|
|
|
static int mcs7830_write_mac_common(struct usb_device *udev,
|
|
unsigned char enetaddr[])
|
|
{
|
|
int rc;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
rc = mcs7830_write_reg(udev, REG_ETHER_ADDR, ETH_ALEN, enetaddr);
|
|
if (rc < 0) {
|
|
debug("writing MAC to adapter failed\n");
|
|
return rc;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mcs7830_init_common(struct usb_device *udev)
|
|
{
|
|
int timeout;
|
|
int have_link;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
timeout = 0;
|
|
do {
|
|
have_link = mcs7830_read_phy(udev, MII_BMSR) & BMSR_LSTATUS;
|
|
if (have_link)
|
|
break;
|
|
udelay(LINKSTATUS_TIMEOUT_RES * 1000);
|
|
timeout += LINKSTATUS_TIMEOUT_RES;
|
|
} while (timeout < LINKSTATUS_TIMEOUT);
|
|
if (!have_link) {
|
|
debug("ethernet link is down\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mcs7830_send_common(struct ueth_data *ueth, void *packet,
|
|
int length)
|
|
{
|
|
struct usb_device *udev = ueth->pusb_dev;
|
|
int rc;
|
|
int gotlen;
|
|
/* there is a status byte after the ethernet frame */
|
|
ALLOC_CACHE_ALIGN_BUFFER(uint8_t, buf, PKTSIZE + sizeof(uint8_t));
|
|
|
|
memcpy(buf, packet, length);
|
|
rc = usb_bulk_msg(udev,
|
|
usb_sndbulkpipe(udev, ueth->ep_out),
|
|
&buf[0], length, &gotlen,
|
|
USBCALL_TIMEOUT);
|
|
debug("%s() TX want len %d, got len %d, rc %d\n",
|
|
__func__, length, gotlen, rc);
|
|
return rc;
|
|
}
|
|
|
|
static int mcs7830_recv_common(struct ueth_data *ueth, uint8_t *buf)
|
|
{
|
|
int rc, wantlen, gotlen;
|
|
uint8_t sts;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
/* fetch input data from the adapter */
|
|
wantlen = MCS7830_RX_URB_SIZE;
|
|
rc = usb_bulk_msg(ueth->pusb_dev,
|
|
usb_rcvbulkpipe(ueth->pusb_dev, ueth->ep_in),
|
|
&buf[0], wantlen, &gotlen,
|
|
USBCALL_TIMEOUT);
|
|
debug("%s() RX want len %d, got len %d, rc %d\n",
|
|
__func__, wantlen, gotlen, rc);
|
|
if (rc != 0) {
|
|
error("RX: failed to receive\n");
|
|
return rc;
|
|
}
|
|
if (gotlen > wantlen) {
|
|
error("RX: got too many bytes (%d)\n", gotlen);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* the bulk message that we received from USB contains exactly
|
|
* one ethernet frame and a trailing status byte
|
|
*/
|
|
if (gotlen < sizeof(sts))
|
|
return -EIO;
|
|
gotlen -= sizeof(sts);
|
|
sts = buf[gotlen];
|
|
|
|
if (sts == STAT_RX_FRAME_CORRECT) {
|
|
debug("%s() got a frame, len=%d\n", __func__, gotlen);
|
|
return gotlen;
|
|
}
|
|
|
|
debug("RX: frame error (sts 0x%02X, %s %s %s %s %s)\n",
|
|
sts,
|
|
(sts & STAT_RX_LARGE_FRAME) ? "large" : "-",
|
|
(sts & STAT_RX_LENGTH_ERROR) ? "length" : "-",
|
|
(sts & STAT_RX_SHORT_FRAME) ? "short" : "-",
|
|
(sts & STAT_RX_CRC_ERROR) ? "crc" : "-",
|
|
(sts & STAT_RX_ALIGNMENT_ERROR) ? "align" : "-");
|
|
return -EIO;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
/*
|
|
* mcs7830_init() - network interface's init callback
|
|
* @udev: network device to initialize
|
|
* @bd: board information
|
|
* Return: zero upon success, negative upon error
|
|
*
|
|
* after initial setup during probe() and get_info(), this init() callback
|
|
* ensures that the link is up and subsequent send() and recv() calls can
|
|
* exchange ethernet frames
|
|
*/
|
|
static int mcs7830_init(struct eth_device *eth, bd_t *bd)
|
|
{
|
|
struct ueth_data *dev = eth->priv;
|
|
|
|
return mcs7830_init_common(dev->pusb_dev);
|
|
}
|
|
|
|
/*
|
|
* mcs7830_send() - network interface's send callback
|
|
* @eth: network device to send the frame from
|
|
* @packet: ethernet frame content
|
|
* @length: ethernet frame length
|
|
* Return: zero upon success, negative upon error
|
|
*
|
|
* this routine send an ethernet frame out of the network interface
|
|
*/
|
|
static int mcs7830_send(struct eth_device *eth, void *packet, int length)
|
|
{
|
|
struct ueth_data *dev = eth->priv;
|
|
|
|
return mcs7830_send_common(dev, packet, length);
|
|
}
|
|
|
|
/*
|
|
* mcs7830_recv() - network interface's recv callback
|
|
* @eth: network device to receive frames from
|
|
* Return: zero upon success, negative upon error
|
|
*
|
|
* this routine checks for available ethernet frames that the network
|
|
* interface might have received, and notifies the network stack
|
|
*/
|
|
static int mcs7830_recv(struct eth_device *eth)
|
|
{
|
|
ALLOC_CACHE_ALIGN_BUFFER(uint8_t, buf, MCS7830_RX_URB_SIZE);
|
|
struct ueth_data *ueth = eth->priv;
|
|
int len;
|
|
|
|
len = mcs7830_recv_common(ueth, buf);
|
|
if (len <= 0)
|
|
net_process_received_packet(buf, len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_halt() - network interface's halt callback
|
|
* @eth: network device to cease operation of
|
|
* Return: none
|
|
*
|
|
* this routine is supposed to undo the effect of previous initialization and
|
|
* ethernet frames exchange; in this implementation it's a NOP
|
|
*/
|
|
static void mcs7830_halt(struct eth_device *eth)
|
|
{
|
|
debug("%s()\n", __func__);
|
|
}
|
|
|
|
/*
|
|
* mcs7830_write_mac() - write an ethernet adapter's MAC address
|
|
* @eth: network device to write to
|
|
* Return: zero upon success, negative upon error
|
|
*
|
|
* this routine takes the MAC address from the ethernet interface's data
|
|
* structure, and writes it into the ethernet adapter such that subsequent
|
|
* exchange of ethernet frames uses this address
|
|
*/
|
|
static int mcs7830_write_mac(struct eth_device *eth)
|
|
{
|
|
struct ueth_data *ueth = eth->priv;
|
|
|
|
return mcs7830_write_mac_common(ueth->pusb_dev, eth->enetaddr);
|
|
}
|
|
|
|
/*
|
|
* mcs7830_iface_idx - index of detected network interfaces
|
|
*
|
|
* this counter keeps track of identified supported interfaces,
|
|
* to assign unique names as more interfaces are found
|
|
*/
|
|
static int mcs7830_iface_idx;
|
|
|
|
/*
|
|
* mcs7830_eth_before_probe() - network driver's before_probe callback
|
|
* Return: none
|
|
*
|
|
* this routine initializes driver's internal data in preparation of
|
|
* subsequent probe callbacks
|
|
*/
|
|
void mcs7830_eth_before_probe(void)
|
|
{
|
|
mcs7830_iface_idx = 0;
|
|
}
|
|
|
|
/*
|
|
* struct mcs7830_dongle - description of a supported Moschip ethernet dongle
|
|
* @vendor: 16bit USB vendor identification
|
|
* @product: 16bit USB product identification
|
|
*
|
|
* this structure describes a supported USB ethernet dongle by means of the
|
|
* vendor and product codes found during USB enumeration; no flags are held
|
|
* here since all supported dongles have identical behaviour, and required
|
|
* fixups get determined at runtime, such that no manual configuration is
|
|
* needed
|
|
*/
|
|
struct mcs7830_dongle {
|
|
uint16_t vendor;
|
|
uint16_t product;
|
|
};
|
|
|
|
/*
|
|
* mcs7830_dongles - the list of supported Moschip based USB ethernet dongles
|
|
*/
|
|
static const struct mcs7830_dongle mcs7830_dongles[] = {
|
|
{ 0x9710, 0x7832, }, /* Moschip 7832 */
|
|
{ 0x9710, 0x7830, }, /* Moschip 7830 */
|
|
{ 0x9710, 0x7730, }, /* Moschip 7730 */
|
|
{ 0x0df6, 0x0021, }, /* Sitecom LN 30 */
|
|
};
|
|
|
|
/*
|
|
* mcs7830_eth_probe() - network driver's probe callback
|
|
* @dev: detected USB device to check
|
|
* @ifnum: detected USB interface to check
|
|
* @ss: USB ethernet data structure to fill in upon match
|
|
* Return: #1 upon match, #0 upon mismatch or error
|
|
*
|
|
* this routine checks whether the found USB device is supported by
|
|
* this ethernet driver, and upon match fills in the USB ethernet
|
|
* data structure which later is passed to the get_info callback
|
|
*/
|
|
int mcs7830_eth_probe(struct usb_device *dev, unsigned int ifnum,
|
|
struct ueth_data *ss)
|
|
{
|
|
struct usb_interface *iface;
|
|
struct usb_interface_descriptor *iface_desc;
|
|
int i;
|
|
struct mcs7830_private *priv;
|
|
int ep_in_found, ep_out_found, ep_intr_found;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
/* iterate the list of supported dongles */
|
|
iface = &dev->config.if_desc[ifnum];
|
|
iface_desc = &iface->desc;
|
|
for (i = 0; i < ARRAY_SIZE(mcs7830_dongles); i++) {
|
|
if (dev->descriptor.idVendor == mcs7830_dongles[i].vendor &&
|
|
dev->descriptor.idProduct == mcs7830_dongles[i].product)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(mcs7830_dongles))
|
|
return 0;
|
|
debug("detected USB ethernet device: %04X:%04X\n",
|
|
dev->descriptor.idVendor, dev->descriptor.idProduct);
|
|
|
|
/* fill in driver private data */
|
|
priv = calloc(1, sizeof(*priv));
|
|
if (!priv)
|
|
return 0;
|
|
|
|
/* fill in the ueth_data structure, attach private data */
|
|
memset(ss, 0, sizeof(*ss));
|
|
ss->ifnum = ifnum;
|
|
ss->pusb_dev = dev;
|
|
ss->subclass = iface_desc->bInterfaceSubClass;
|
|
ss->protocol = iface_desc->bInterfaceProtocol;
|
|
ss->dev_priv = priv;
|
|
|
|
/*
|
|
* a minimum of three endpoints is expected: in (bulk),
|
|
* out (bulk), and interrupt; ignore all others
|
|
*/
|
|
ep_in_found = ep_out_found = ep_intr_found = 0;
|
|
for (i = 0; i < iface_desc->bNumEndpoints; i++) {
|
|
uint8_t eptype, epaddr;
|
|
bool is_input;
|
|
|
|
eptype = iface->ep_desc[i].bmAttributes;
|
|
eptype &= USB_ENDPOINT_XFERTYPE_MASK;
|
|
|
|
epaddr = iface->ep_desc[i].bEndpointAddress;
|
|
is_input = epaddr & USB_DIR_IN;
|
|
epaddr &= USB_ENDPOINT_NUMBER_MASK;
|
|
|
|
if (eptype == USB_ENDPOINT_XFER_BULK) {
|
|
if (is_input && !ep_in_found) {
|
|
ss->ep_in = epaddr;
|
|
ep_in_found++;
|
|
}
|
|
if (!is_input && !ep_out_found) {
|
|
ss->ep_out = epaddr;
|
|
ep_out_found++;
|
|
}
|
|
}
|
|
|
|
if (eptype == USB_ENDPOINT_XFER_INT) {
|
|
if (is_input && !ep_intr_found) {
|
|
ss->ep_int = epaddr;
|
|
ss->irqinterval = iface->ep_desc[i].bInterval;
|
|
ep_intr_found++;
|
|
}
|
|
}
|
|
}
|
|
debug("endpoints: in %d, out %d, intr %d\n",
|
|
ss->ep_in, ss->ep_out, ss->ep_int);
|
|
|
|
/* apply basic sanity checks */
|
|
if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
|
|
!ss->ep_in || !ss->ep_out || !ss->ep_int) {
|
|
debug("device probe incomplete\n");
|
|
return 0;
|
|
}
|
|
|
|
dev->privptr = ss;
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* mcs7830_eth_get_info() - network driver's get_info callback
|
|
* @dev: detected USB device
|
|
* @ss: USB ethernet data structure filled in at probe()
|
|
* @eth: ethernet interface data structure to fill in
|
|
* Return: #1 upon success, #0 upon error
|
|
*
|
|
* this routine registers the mandatory init(), send(), recv(), and
|
|
* halt() callbacks with the ethernet interface, can register the
|
|
* optional write_hwaddr() callback with the ethernet interface,
|
|
* and initiates configuration of the interface such that subsequent
|
|
* calls to those callbacks results in network communication
|
|
*/
|
|
int mcs7830_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
|
|
struct eth_device *eth)
|
|
{
|
|
debug("%s()\n", __func__);
|
|
if (!eth) {
|
|
debug("%s: missing parameter.\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
snprintf(eth->name, sizeof(eth->name), "%s%d",
|
|
MCS7830_BASE_NAME, mcs7830_iface_idx++);
|
|
eth->init = mcs7830_init;
|
|
eth->send = mcs7830_send;
|
|
eth->recv = mcs7830_recv;
|
|
eth->halt = mcs7830_halt;
|
|
eth->write_hwaddr = mcs7830_write_mac;
|
|
eth->priv = ss;
|
|
|
|
if (mcs7830_basic_reset(ss->pusb_dev, ss->dev_priv))
|
|
return 0;
|
|
|
|
if (mcs7830_read_mac(ss->pusb_dev, eth->enetaddr))
|
|
return 0;
|
|
debug("MAC %pM\n", eth->enetaddr);
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static int mcs7830_eth_start(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
|
|
return mcs7830_init_common(udev);
|
|
}
|
|
|
|
void mcs7830_eth_stop(struct udevice *dev)
|
|
{
|
|
debug("** %s()\n", __func__);
|
|
}
|
|
|
|
int mcs7830_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct mcs7830_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
|
|
return mcs7830_send_common(ueth, packet, length);
|
|
}
|
|
|
|
int mcs7830_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct mcs7830_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
int len;
|
|
|
|
len = mcs7830_recv_common(ueth, priv->rx_buf);
|
|
*packetp = priv->rx_buf;
|
|
|
|
return len;
|
|
}
|
|
|
|
static int mcs7830_free_pkt(struct udevice *dev, uchar *packet, int packet_len)
|
|
{
|
|
struct mcs7830_private *priv = dev_get_priv(dev);
|
|
|
|
packet_len = ALIGN(packet_len, 4);
|
|
usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mcs7830_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
|
|
return mcs7830_write_mac_common(udev, pdata->enetaddr);
|
|
}
|
|
|
|
static int mcs7830_eth_probe(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct mcs7830_private *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
|
|
if (mcs7830_basic_reset(udev, priv))
|
|
return 0;
|
|
|
|
if (mcs7830_read_mac(udev, pdata->enetaddr))
|
|
return 0;
|
|
|
|
return usb_ether_register(dev, ueth, MCS7830_RX_URB_SIZE);
|
|
}
|
|
|
|
static const struct eth_ops mcs7830_eth_ops = {
|
|
.start = mcs7830_eth_start,
|
|
.send = mcs7830_eth_send,
|
|
.recv = mcs7830_eth_recv,
|
|
.free_pkt = mcs7830_free_pkt,
|
|
.stop = mcs7830_eth_stop,
|
|
.write_hwaddr = mcs7830_write_hwaddr,
|
|
};
|
|
|
|
U_BOOT_DRIVER(mcs7830_eth) = {
|
|
.name = "mcs7830_eth",
|
|
.id = UCLASS_ETH,
|
|
.probe = mcs7830_eth_probe,
|
|
.ops = &mcs7830_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct mcs7830_private),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|
|
|
|
static const struct usb_device_id mcs7830_eth_id_table[] = {
|
|
{ USB_DEVICE(0x9710, 0x7832) }, /* Moschip 7832 */
|
|
{ USB_DEVICE(0x9710, 0x7830), }, /* Moschip 7830 */
|
|
{ USB_DEVICE(0x9710, 0x7730), }, /* Moschip 7730 */
|
|
{ USB_DEVICE(0x0df6, 0x0021), }, /* Sitecom LN 30 */
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
U_BOOT_USB_DEVICE(mcs7830_eth, mcs7830_eth_id_table);
|
|
#endif
|