mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 01:19:49 +00:00
0de10e2fe1
Add DT for DHCOR Testbench board, which is a testbench for testing of DHCOR SoM during manufacturing. This is effectively a trimmed down version of AV96 board with CSI-2 bridge, HDMI bridge, WiFi, Audio and LEDs removed and used as GPIOs instead. Furthermore, the PMIC Buck3 is always configured from PMIC NVM to cater for both 1V8 and 3V3 SoM variant. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
178 lines
3.5 KiB
Text
178 lines
3.5 KiB
Text
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "stm32mp151.dtsi"
|
|
#include "stm32mp15xx-dhcor-som.dtsi"
|
|
|
|
/ {
|
|
model = "DH electronics STM32MP15xx DHCOR Testbench";
|
|
compatible = "dh,stm32mp15xx-dhcor-testbench", "st,stm32mp1xx";
|
|
|
|
aliases {
|
|
ethernet0 = ðernet0;
|
|
mmc0 = &sdmmc1;
|
|
mmc1 = &sdmmc2;
|
|
serial0 = &uart4;
|
|
serial1 = &uart7;
|
|
spi0 = &qspi;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
sd_switch: regulator-sd_switch {
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "sd_switch";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-type = "voltage";
|
|
regulator-always-on;
|
|
|
|
gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
|
|
gpios-states = <0>;
|
|
states = <1800000 0x1>,
|
|
<2900000 0x0>;
|
|
};
|
|
};
|
|
|
|
&adc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&adc12_ain_pins_b>;
|
|
vdd-supply = <&vdd>;
|
|
vdda-supply = <&vdda>;
|
|
vref-supply = <&vdda>;
|
|
status = "okay";
|
|
|
|
adc1: adc@0 {
|
|
st,adc-channels = <0 1 6>;
|
|
st,min-sample-time-nsecs = <5000>;
|
|
status = "okay";
|
|
};
|
|
|
|
adc2: adc@100 {
|
|
st,adc-channels = <0 1 2>;
|
|
st,min-sample-time-nsecs = <5000>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
ðernet0 {
|
|
status = "okay";
|
|
pinctrl-0 = <ðernet0_rgmii_pins_c>;
|
|
pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>;
|
|
pinctrl-names = "default", "sleep";
|
|
phy-mode = "rgmii";
|
|
max-speed = <1000>;
|
|
phy-handle = <&phy0>;
|
|
|
|
mdio0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dwmac-mdio";
|
|
reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <1000>;
|
|
|
|
phy0: ethernet-phy@7 {
|
|
reg = <7>;
|
|
|
|
rxc-skew-ps = <1500>;
|
|
rxdv-skew-ps = <540>;
|
|
rxd0-skew-ps = <420>;
|
|
rxd1-skew-ps = <420>;
|
|
rxd2-skew-ps = <420>;
|
|
rxd3-skew-ps = <420>;
|
|
|
|
txc-skew-ps = <1440>;
|
|
txen-skew-ps = <540>;
|
|
txd0-skew-ps = <420>;
|
|
txd1-skew-ps = <420>;
|
|
txd2-skew-ps = <420>;
|
|
txd3-skew-ps = <420>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdmmc1 {
|
|
pinctrl-names = "default", "opendrain", "sleep";
|
|
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
|
|
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
|
|
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
|
|
cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
|
|
disable-wp;
|
|
st,sig-dir;
|
|
st,neg-edge;
|
|
st,use-ckin;
|
|
bus-width = <4>;
|
|
vmmc-supply = <&vdd_sd>;
|
|
vqmmc-supply = <&sd_switch>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc2 {
|
|
pinctrl-names = "default", "opendrain", "sleep";
|
|
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
|
|
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
|
|
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
|
|
bus-width = <8>;
|
|
mmc-ddr-1_8v;
|
|
no-sd;
|
|
no-sdio;
|
|
non-removable;
|
|
st,neg-edge;
|
|
vmmc-supply = <&v3v3>;
|
|
vqmmc-supply = <&v3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins_b>;
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart7 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart7_pins_a>;
|
|
uart-has-rtscts;
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh_ehci {
|
|
phys = <&usbphyc_port0>;
|
|
phy-names = "usb";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg_hs {
|
|
pinctrl-0 = <&usbotg_hs_pins_a>;
|
|
pinctrl-names = "default";
|
|
phy-names = "usb2-phy";
|
|
phys = <&usbphyc_port1 0>;
|
|
status = "okay";
|
|
vbus-supply = <&vbus_otg>;
|
|
};
|
|
|
|
&usbphyc {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc_port0 {
|
|
phy-supply = <&vdd_usb>;
|
|
};
|
|
|
|
&usbphyc_port1 {
|
|
phy-supply = <&vdd_usb>;
|
|
};
|
|
|
|
&vdd {
|
|
/delete-property/ regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
};
|