mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 08:01:08 +00:00
bf0783df0d
The problem was caused by a global variable being used early in the boot process. The symptoms were on imx31_phycore board, reading the environment from I2C EEPROM didn't work correctly and causes default environment to be loaded. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Anatolij Gustschin <agust@denx.de> Tested-by: Stefano Babic <sbabic@denx.de>
472 lines
9.9 KiB
C
472 lines
9.9 KiB
C
/*
|
|
* i2c driver for Freescale i.MX series
|
|
*
|
|
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
|
|
* (c) 2011 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Based on i2c-imx.c from linux kernel:
|
|
* Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de>
|
|
* Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de>
|
|
* Copyright (C) 2007 RightHand Technologies, Inc.
|
|
* Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
|
|
*
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
|
|
#if defined(CONFIG_HARD_I2C)
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <i2c.h>
|
|
|
|
struct mxc_i2c_regs {
|
|
uint32_t iadr;
|
|
uint32_t ifdr;
|
|
uint32_t i2cr;
|
|
uint32_t i2sr;
|
|
uint32_t i2dr;
|
|
};
|
|
|
|
#define I2CR_IEN (1 << 7)
|
|
#define I2CR_IIEN (1 << 6)
|
|
#define I2CR_MSTA (1 << 5)
|
|
#define I2CR_MTX (1 << 4)
|
|
#define I2CR_TX_NO_AK (1 << 3)
|
|
#define I2CR_RSTA (1 << 2)
|
|
|
|
#define I2SR_ICF (1 << 7)
|
|
#define I2SR_IBB (1 << 5)
|
|
#define I2SR_IIF (1 << 1)
|
|
#define I2SR_RX_NO_AK (1 << 0)
|
|
|
|
#if defined(CONFIG_SYS_I2C_MX31_PORT1)
|
|
#define I2C_BASE 0x43f80000
|
|
#define I2C_CLK_OFFSET 26
|
|
#elif defined (CONFIG_SYS_I2C_MX31_PORT2)
|
|
#define I2C_BASE 0x43f98000
|
|
#define I2C_CLK_OFFSET 28
|
|
#elif defined (CONFIG_SYS_I2C_MX31_PORT3)
|
|
#define I2C_BASE 0x43f84000
|
|
#define I2C_CLK_OFFSET 30
|
|
#elif defined(CONFIG_SYS_I2C_MX53_PORT1)
|
|
#define I2C_BASE I2C1_BASE_ADDR
|
|
#elif defined(CONFIG_SYS_I2C_MX53_PORT2)
|
|
#define I2C_BASE I2C2_BASE_ADDR
|
|
#elif defined(CONFIG_SYS_I2C_MX35_PORT1)
|
|
#define I2C_BASE I2C_BASE_ADDR
|
|
#elif defined(CONFIG_SYS_I2C_MX35_PORT2)
|
|
#define I2C_BASE I2C2_BASE_ADDR
|
|
#elif defined(CONFIG_SYS_I2C_MX35_PORT3)
|
|
#define I2C_BASE I2C3_BASE_ADDR
|
|
#else
|
|
#error "define CONFIG_SYS_I2C_MX<Processor>_PORTx to use the mx I2C driver"
|
|
#endif
|
|
|
|
#define I2C_MAX_TIMEOUT 10000
|
|
|
|
static u16 i2c_clk_div[50][2] = {
|
|
{ 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
|
|
{ 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
|
|
{ 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
|
|
{ 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B },
|
|
{ 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A },
|
|
{ 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 },
|
|
{ 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 },
|
|
{ 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 },
|
|
{ 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 },
|
|
{ 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B },
|
|
{ 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E },
|
|
{ 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D },
|
|
{ 3072, 0x1E }, { 3840, 0x1F }
|
|
};
|
|
|
|
/*
|
|
* Calculate and set proper clock divider
|
|
*/
|
|
static uint8_t i2c_imx_get_clk(unsigned int rate)
|
|
{
|
|
unsigned int i2c_clk_rate;
|
|
unsigned int div;
|
|
u8 clk_div;
|
|
|
|
#if defined(CONFIG_MX31)
|
|
struct clock_control_regs *sc_regs =
|
|
(struct clock_control_regs *)CCM_BASE;
|
|
|
|
/* start the required I2C clock */
|
|
writel(readl(&sc_regs->cgr0) | (3 << I2C_CLK_OFFSET),
|
|
&sc_regs->cgr0);
|
|
#endif
|
|
|
|
/* Divider value calculation */
|
|
i2c_clk_rate = mxc_get_clock(MXC_IPG_PERCLK);
|
|
div = (i2c_clk_rate + rate - 1) / rate;
|
|
if (div < i2c_clk_div[0][0])
|
|
clk_div = 0;
|
|
else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
|
|
clk_div = ARRAY_SIZE(i2c_clk_div) - 1;
|
|
else
|
|
for (clk_div = 0; i2c_clk_div[clk_div][0] < div; clk_div++)
|
|
;
|
|
|
|
/* Store divider value */
|
|
return clk_div;
|
|
}
|
|
|
|
/*
|
|
* Reset I2C Controller
|
|
*/
|
|
void i2c_reset(void)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
|
|
writeb(0, &i2c_regs->i2cr); /* Reset module */
|
|
writeb(0, &i2c_regs->i2sr);
|
|
}
|
|
|
|
/*
|
|
* Init I2C Bus
|
|
*/
|
|
void i2c_init(int speed, int unused)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
u8 clk_idx = i2c_imx_get_clk(speed);
|
|
u8 idx = i2c_clk_div[clk_idx][1];
|
|
|
|
/* Store divider value */
|
|
writeb(idx, &i2c_regs->ifdr);
|
|
|
|
i2c_reset();
|
|
}
|
|
|
|
/*
|
|
* Set I2C Speed
|
|
*/
|
|
int i2c_set_bus_speed(unsigned int speed)
|
|
{
|
|
i2c_init(speed, 0);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Get I2C Speed
|
|
*/
|
|
unsigned int i2c_get_bus_speed(void)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
u8 clk_idx = readb(&i2c_regs->ifdr);
|
|
u8 clk_div;
|
|
|
|
for (clk_div = 0; i2c_clk_div[clk_div][1] != clk_idx; clk_div++)
|
|
;
|
|
|
|
return mxc_get_clock(MXC_IPG_PERCLK) / i2c_clk_div[clk_div][0];
|
|
}
|
|
|
|
/*
|
|
* Wait for bus to be busy (or free if for_busy = 0)
|
|
*
|
|
* for_busy = 1: Wait for IBB to be asserted
|
|
* for_busy = 0: Wait for IBB to be de-asserted
|
|
*/
|
|
int i2c_imx_bus_busy(int for_busy)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
unsigned int temp;
|
|
|
|
int timeout = I2C_MAX_TIMEOUT;
|
|
|
|
while (timeout--) {
|
|
temp = readb(&i2c_regs->i2sr);
|
|
|
|
if (for_busy && (temp & I2SR_IBB))
|
|
return 0;
|
|
if (!for_busy && !(temp & I2SR_IBB))
|
|
return 0;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Wait for transaction to complete
|
|
*/
|
|
int i2c_imx_trx_complete(void)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
int timeout = I2C_MAX_TIMEOUT;
|
|
|
|
while (timeout--) {
|
|
if (readb(&i2c_regs->i2sr) & I2SR_IIF) {
|
|
writeb(0, &i2c_regs->i2sr);
|
|
return 0;
|
|
}
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Check if the transaction was ACKed
|
|
*/
|
|
int i2c_imx_acked(void)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
|
|
return readb(&i2c_regs->i2sr) & I2SR_RX_NO_AK;
|
|
}
|
|
|
|
/*
|
|
* Start the controller
|
|
*/
|
|
int i2c_imx_start(void)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
unsigned int temp = 0;
|
|
int result;
|
|
int speed = i2c_get_bus_speed();
|
|
u8 clk_idx = i2c_imx_get_clk(speed);
|
|
u8 idx = i2c_clk_div[clk_idx][1];
|
|
|
|
/* Store divider value */
|
|
writeb(idx, &i2c_regs->ifdr);
|
|
|
|
/* Enable I2C controller */
|
|
writeb(0, &i2c_regs->i2sr);
|
|
writeb(I2CR_IEN, &i2c_regs->i2cr);
|
|
|
|
/* Wait controller to be stable */
|
|
udelay(50);
|
|
|
|
/* Start I2C transaction */
|
|
temp = readb(&i2c_regs->i2cr);
|
|
temp |= I2CR_MSTA;
|
|
writeb(temp, &i2c_regs->i2cr);
|
|
|
|
result = i2c_imx_bus_busy(1);
|
|
if (result)
|
|
return result;
|
|
|
|
temp |= I2CR_MTX | I2CR_TX_NO_AK;
|
|
writeb(temp, &i2c_regs->i2cr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Stop the controller
|
|
*/
|
|
void i2c_imx_stop(void)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
unsigned int temp = 0;
|
|
|
|
/* Stop I2C transaction */
|
|
temp = readb(&i2c_regs->i2cr);
|
|
temp |= ~(I2CR_MSTA | I2CR_MTX);
|
|
writeb(temp, &i2c_regs->i2cr);
|
|
|
|
i2c_imx_bus_busy(0);
|
|
|
|
/* Disable I2C controller */
|
|
writeb(0, &i2c_regs->i2cr);
|
|
}
|
|
|
|
/*
|
|
* Set chip address and access mode
|
|
*
|
|
* read = 1: READ access
|
|
* read = 0: WRITE access
|
|
*/
|
|
int i2c_imx_set_chip_addr(uchar chip, int read)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
int ret;
|
|
|
|
writeb((chip << 1) | read, &i2c_regs->i2dr);
|
|
|
|
ret = i2c_imx_trx_complete();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = i2c_imx_acked();
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Write register address
|
|
*/
|
|
int i2c_imx_set_reg_addr(uint addr, int alen)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
int ret = 0;
|
|
|
|
while (alen--) {
|
|
writeb((addr >> (alen * 8)) & 0xff, &i2c_regs->i2dr);
|
|
|
|
ret = i2c_imx_trx_complete();
|
|
if (ret)
|
|
break;
|
|
|
|
ret = i2c_imx_acked();
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Try if a chip add given address responds (probe the chip)
|
|
*/
|
|
int i2c_probe(uchar chip)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_imx_start();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = i2c_imx_set_chip_addr(chip, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
i2c_imx_stop();
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Read data from I2C device
|
|
*/
|
|
int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
int ret;
|
|
unsigned int temp;
|
|
int i;
|
|
|
|
ret = i2c_imx_start();
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* write slave address */
|
|
ret = i2c_imx_set_chip_addr(chip, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = i2c_imx_set_reg_addr(addr, alen);
|
|
if (ret)
|
|
return ret;
|
|
|
|
temp = readb(&i2c_regs->i2cr);
|
|
temp |= I2CR_RSTA;
|
|
writeb(temp, &i2c_regs->i2cr);
|
|
|
|
ret = i2c_imx_set_chip_addr(chip, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* setup bus to read data */
|
|
temp = readb(&i2c_regs->i2cr);
|
|
temp &= ~(I2CR_MTX | I2CR_TX_NO_AK);
|
|
if (len == 1)
|
|
temp |= I2CR_TX_NO_AK;
|
|
writeb(temp, &i2c_regs->i2cr);
|
|
readb(&i2c_regs->i2dr);
|
|
|
|
/* read data */
|
|
for (i = 0; i < len; i++) {
|
|
ret = i2c_imx_trx_complete();
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* It must generate STOP before read I2DR to prevent
|
|
* controller from generating another clock cycle
|
|
*/
|
|
if (i == (len - 1)) {
|
|
temp = readb(&i2c_regs->i2cr);
|
|
temp &= ~(I2CR_MSTA | I2CR_MTX);
|
|
writeb(temp, &i2c_regs->i2cr);
|
|
i2c_imx_bus_busy(0);
|
|
} else if (i == (len - 2)) {
|
|
temp = readb(&i2c_regs->i2cr);
|
|
temp |= I2CR_TX_NO_AK;
|
|
writeb(temp, &i2c_regs->i2cr);
|
|
}
|
|
|
|
buf[i] = readb(&i2c_regs->i2dr);
|
|
}
|
|
|
|
i2c_imx_stop();
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Write data to I2C device
|
|
*/
|
|
int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
|
|
{
|
|
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
|
|
int ret;
|
|
int i;
|
|
|
|
ret = i2c_imx_start();
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* write slave address */
|
|
ret = i2c_imx_set_chip_addr(chip, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = i2c_imx_set_reg_addr(addr, alen);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
writeb(buf[i], &i2c_regs->i2dr);
|
|
|
|
ret = i2c_imx_trx_complete();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = i2c_imx_acked();
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
i2c_imx_stop();
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_HARD_I2C */
|