u-boot/include/power/pca9450.h
Ye Li 69c573ca89 power: pmic: Add NXP PCA9451A PMIC support
PCA9451A uses similar BUCKs and LDO regulators as PCA9450B/C but
has LDO2 and LDO3 removed. So reuse pca9450 PMIC and regulator driver
and add new type for PCA9451A.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2023-03-30 00:45:39 +02:00

75 lines
2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2019 NXP
*/
#ifndef PCA9450_H_
#define PCA9450_H_
#define PCA9450_REGULATOR_DRIVER "pca9450_regulator"
enum {
PCA9450_REG_DEV_ID = 0x00,
PCA9450_INT1 = 0x01,
PCA9450_INT1_MSK = 0x02,
PCA9450_STATUS1 = 0x03,
PCA9450_STATUS2 = 0x04,
PCA9450_PWRON_STAT = 0x05,
PCA9450_SW_RST = 0x06,
PCA9450_PWR_CTRL = 0x07,
PCA9450_RESET_CTRL = 0x08,
PCA9450_CONFIG1 = 0x09,
PCA9450_CONFIG2 = 0x0A,
PCA9450_BUCK123_DVS = 0x0C,
PCA9450_BUCK1OUT_LIMIT = 0x0D,
PCA9450_BUCK2OUT_LIMIT = 0x0E,
PCA9450_BUCK3OUT_LIMIT = 0x0F,
PCA9450_BUCK1CTRL = 0x10,
PCA9450_BUCK1OUT_DVS0 = 0x11,
PCA9450_BUCK1OUT_DVS1 = 0x12,
PCA9450_BUCK2CTRL = 0x13,
PCA9450_BUCK2OUT_DVS0 = 0x14,
PCA9450_BUCK2OUT_DVS1 = 0x15,
PCA9450_BUCK3CTRL = 0x16,
PCA9450_BUCK3OUT_DVS0 = 0x17,
PCA9450_BUCK3OUT_DVS1 = 0x18,
PCA9450_BUCK4CTRL = 0x19,
PCA9450_BUCK4OUT = 0x1A,
PCA9450_BUCK5CTRL = 0x1B,
PCA9450_BUCK5OUT = 0x1C,
PCA9450_BUCK6CTRL = 0x1D,
PCA9450_BUCK6OUT = 0x1E,
PCA9450_LDO_AD_CTRL = 0x20,
PCA9450_LDO1CTRL = 0x21,
PCA9450_LDO2CTRL = 0x22,
PCA9450_LDO3CTRL = 0x23,
PCA9450_LDO4CTRL = 0x24,
PCA9450_LDO5CTRL_L = 0x25,
PCA9450_LDO5CTRL_H = 0x26,
PCA9450_LOADSW_CTRL = 0x2A,
PCA9450_VRFLT1_STS = 0x2B,
PCA9450_VRFLT2_STS = 0x2C,
PCA9450_VRFLT1_MASK = 0x2D,
PCA9450_VRFLT2_MASK = 0x2E,
PCA9450_REG_NUM,
};
int power_pca9450_init(unsigned char bus, unsigned char addr);
enum {
NXP_CHIP_TYPE_PCA9450A = 0,
NXP_CHIP_TYPE_PCA9450BC,
NXP_CHIP_TYPE_PCA9451A,
NXP_CHIP_TYPE_AMOUNT
};
#define PCA9450_DVS_BUCK_RUN_MASK 0x7f
#define PCA9450_LDO12_MASK 0x07
#define PCA9450_LDO34_MASK 0x1f
#define PCA9450_LDO5_MASK 0x0f
#define PCA9450_PMIC_RESET_WDOG_B_CFG_MASK 0xc0
#define PCA9450_PMIC_RESET_WDOG_B_CFG_WARM 0x40
#define PCA9450_PMIC_RESET_WDOG_B_CFG_COLD_LDO12 0x80
#endif