mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
425 lines
13 KiB
C
425 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2014 Wandboard
|
|
* Author: Tungyi Lin <tungyilin1127@gmail.com>
|
|
* Richard Hu <hakahu@gmail.com>
|
|
*/
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/video.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <spl.h>
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
#include <asm/arch/mx6-ddr.h>
|
|
/*
|
|
* Driving strength:
|
|
* 0x30 == 40 Ohm
|
|
* 0x28 == 48 Ohm
|
|
*/
|
|
|
|
#define IMX6DQ_DRIVE_STRENGTH 0x30
|
|
#define IMX6SDL_DRIVE_STRENGTH 0x28
|
|
#define IMX6QP_DRIVE_STRENGTH 0x28
|
|
|
|
/* configure MX6Q/DUAL mmdc DDR io registers */
|
|
static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
|
|
.dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_cas = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_ras = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_reset = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdcke0 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdcke1 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdba2 = 0x00000000,
|
|
.dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
|
|
.dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
|
|
};
|
|
|
|
/* configure MX6QP mmdc DDR io registers */
|
|
static struct mx6dq_iomux_ddr_regs mx6qp_ddr_ioregs = {
|
|
.dram_sdclk_0 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdclk_1 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_cas = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_ras = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_reset = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdcke0 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdcke1 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdba2 = 0x00000000,
|
|
.dram_sdodt0 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdodt1 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdqs0 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdqs1 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdqs2 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdqs3 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdqs4 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdqs5 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdqs6 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_sdqs7 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_dqm0 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_dqm1 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_dqm2 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_dqm3 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_dqm4 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_dqm5 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_dqm6 = IMX6QP_DRIVE_STRENGTH,
|
|
.dram_dqm7 = IMX6QP_DRIVE_STRENGTH,
|
|
};
|
|
|
|
/* configure MX6Q/DUAL mmdc GRP io registers */
|
|
static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
|
|
.grp_ddr_type = 0x000c0000,
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
.grp_ddrpke = 0x00000000,
|
|
.grp_addds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
|
|
.grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
|
|
};
|
|
|
|
/* configure MX6QP mmdc GRP io registers */
|
|
static struct mx6dq_iomux_grp_regs mx6qp_grp_ioregs = {
|
|
.grp_ddr_type = 0x000c0000,
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
.grp_ddrpke = 0x00000000,
|
|
.grp_addds = IMX6QP_DRIVE_STRENGTH,
|
|
.grp_ctlds = IMX6QP_DRIVE_STRENGTH,
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_b0ds = IMX6QP_DRIVE_STRENGTH,
|
|
.grp_b1ds = IMX6QP_DRIVE_STRENGTH,
|
|
.grp_b2ds = IMX6QP_DRIVE_STRENGTH,
|
|
.grp_b3ds = IMX6QP_DRIVE_STRENGTH,
|
|
.grp_b4ds = IMX6QP_DRIVE_STRENGTH,
|
|
.grp_b5ds = IMX6QP_DRIVE_STRENGTH,
|
|
.grp_b6ds = IMX6QP_DRIVE_STRENGTH,
|
|
.grp_b7ds = IMX6QP_DRIVE_STRENGTH,
|
|
};
|
|
|
|
/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
|
|
struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
|
|
.dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_cas = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_ras = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_reset = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdba2 = 0x00000000,
|
|
.dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm0 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm1 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm2 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm3 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm4 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm5 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm6 = IMX6SDL_DRIVE_STRENGTH,
|
|
.dram_dqm7 = IMX6SDL_DRIVE_STRENGTH,
|
|
};
|
|
|
|
/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
|
|
struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
|
|
.grp_ddr_type = 0x000c0000,
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
.grp_ddrpke = 0x00000000,
|
|
.grp_addds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_ctlds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_b0ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b1ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b2ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b3ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b4ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b5ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b6ds = IMX6SDL_DRIVE_STRENGTH,
|
|
.grp_b7ds = IMX6SDL_DRIVE_STRENGTH,
|
|
};
|
|
|
|
/* H5T04G63AFR-PB */
|
|
static struct mx6_ddr3_cfg h5t04g63afr = {
|
|
.mem_speed = 1600,
|
|
.density = 4,
|
|
.width = 16,
|
|
.banks = 8,
|
|
.rowaddr = 15,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1375,
|
|
.trcmin = 4875,
|
|
.trasmin = 3500,
|
|
};
|
|
|
|
/* H5TQ2G63DFR-H9 */
|
|
static struct mx6_ddr3_cfg h5tq2g63dfr = {
|
|
.mem_speed = 1333,
|
|
.density = 2,
|
|
.width = 16,
|
|
.banks = 8,
|
|
.rowaddr = 14,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1350,
|
|
.trcmin = 4950,
|
|
.trasmin = 3600,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6q_2g_mmdc_calib = {
|
|
.p0_mpwldectrl0 = 0x001f001f,
|
|
.p0_mpwldectrl1 = 0x001f001f,
|
|
.p1_mpwldectrl0 = 0x001f001f,
|
|
.p1_mpwldectrl1 = 0x001f001f,
|
|
.p0_mpdgctrl0 = 0x4301030d,
|
|
.p0_mpdgctrl1 = 0x03020277,
|
|
.p1_mpdgctrl0 = 0x4300030a,
|
|
.p1_mpdgctrl1 = 0x02780248,
|
|
.p0_mprddlctl = 0x4536393b,
|
|
.p1_mprddlctl = 0x36353441,
|
|
.p0_mpwrdlctl = 0x41414743,
|
|
.p1_mpwrdlctl = 0x462f453f,
|
|
};
|
|
|
|
/* DDR 64bit 2GB */
|
|
static struct mx6_ddr_sysinfo mem_q = {
|
|
.dsize = 2,
|
|
.cs1_mirror = 0,
|
|
/* config for full 4GB range so that get_mem_size() works */
|
|
.cs_density = 32,
|
|
.ncs = 1,
|
|
.bi_on = 1,
|
|
.rtt_nom = 1,
|
|
.rtt_wr = 0,
|
|
.ralat = 5,
|
|
.walat = 0,
|
|
.mif3_mode = 3,
|
|
.rst_to_cke = 0x23,
|
|
.sde_to_rst = 0x10,
|
|
.refsel = 1, /* Refresh cycles at 32KHz */
|
|
.refr = 3, /* 4 refresh commands per refresh cycle */
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = {
|
|
.p0_mpwldectrl0 = 0x001f001f,
|
|
.p0_mpwldectrl1 = 0x001f001f,
|
|
.p1_mpwldectrl0 = 0x001f001f,
|
|
.p1_mpwldectrl1 = 0x001f001f,
|
|
.p0_mpdgctrl0 = 0x420e020e,
|
|
.p0_mpdgctrl1 = 0x02000200,
|
|
.p1_mpdgctrl0 = 0x42020202,
|
|
.p1_mpdgctrl1 = 0x01720172,
|
|
.p0_mprddlctl = 0x494c4f4c,
|
|
.p1_mprddlctl = 0x4a4c4c49,
|
|
.p0_mpwrdlctl = 0x3f3f3133,
|
|
.p1_mpwrdlctl = 0x39373f2e,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration mx6s_512m_mmdc_calib = {
|
|
.p0_mpwldectrl0 = 0x0040003c,
|
|
.p0_mpwldectrl1 = 0x0032003e,
|
|
.p0_mpdgctrl0 = 0x42350231,
|
|
.p0_mpdgctrl1 = 0x021a0218,
|
|
.p0_mprddlctl = 0x4b4b4e49,
|
|
.p0_mpwrdlctl = 0x3f3f3035,
|
|
};
|
|
|
|
/* DDR 64bit 1GB */
|
|
static struct mx6_ddr_sysinfo mem_dl = {
|
|
.dsize = 2,
|
|
.cs1_mirror = 0,
|
|
/* config for full 4GB range so that get_mem_size() works */
|
|
.cs_density = 32,
|
|
.ncs = 1,
|
|
.bi_on = 1,
|
|
.rtt_nom = 1,
|
|
.rtt_wr = 0,
|
|
.ralat = 5,
|
|
.walat = 0,
|
|
.mif3_mode = 3,
|
|
.rst_to_cke = 0x23,
|
|
.sde_to_rst = 0x10,
|
|
.refsel = 1, /* Refresh cycles at 32KHz */
|
|
.refr = 3, /* 4 refresh commands per refresh cycle */
|
|
};
|
|
|
|
/* DDR 32bit 512MB */
|
|
static struct mx6_ddr_sysinfo mem_s = {
|
|
.dsize = 1,
|
|
.cs1_mirror = 0,
|
|
/* config for full 4GB range so that get_mem_size() works */
|
|
.cs_density = 32,
|
|
.ncs = 1,
|
|
.bi_on = 1,
|
|
.rtt_nom = 1,
|
|
.rtt_wr = 0,
|
|
.ralat = 5,
|
|
.walat = 0,
|
|
.mif3_mode = 3,
|
|
.rst_to_cke = 0x23,
|
|
.sde_to_rst = 0x10,
|
|
.refsel = 1, /* Refresh cycles at 32KHz */
|
|
.refr = 3, /* 4 refresh commands per refresh cycle */
|
|
};
|
|
|
|
static void ccgr_init(void)
|
|
{
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
writel(0x00C03F3F, &ccm->CCGR0);
|
|
writel(0x0030FC03, &ccm->CCGR1);
|
|
writel(0x0FFFC000, &ccm->CCGR2);
|
|
writel(0x3FF03000, &ccm->CCGR3);
|
|
writel(0x00FFF300, &ccm->CCGR4);
|
|
writel(0x0F0000C3, &ccm->CCGR5);
|
|
writel(0x000003FF, &ccm->CCGR6);
|
|
}
|
|
|
|
static void spl_dram_init_imx6qp_lpddr3(void)
|
|
{
|
|
/* MMDC0_MDSCR set the Configuration request bit during MMDC set up */
|
|
writel(0x00008000, MMDC_P0_BASE_ADDR + 0x01c);
|
|
/* Calibrations - ZQ */
|
|
writel(0xa1390003, MMDC_P0_BASE_ADDR + 0x800);
|
|
/* write leveling */
|
|
writel(0x00060004, MMDC_P0_BASE_ADDR + 0x80c);
|
|
writel(0x000B0004, MMDC_P0_BASE_ADDR + 0x810);
|
|
writel(0x00000004, MMDC_P1_BASE_ADDR + 0x80c);
|
|
writel(0x00000000, MMDC_P1_BASE_ADDR + 0x810);
|
|
/*
|
|
* DQS gating, read delay, write delay calibration values
|
|
* based on calibration compare of 0x00ffff00
|
|
*/
|
|
writel(0x03040314, MMDC_P0_BASE_ADDR + 0x83c);
|
|
writel(0x03080300, MMDC_P0_BASE_ADDR + 0x840);
|
|
writel(0x03000310, MMDC_P1_BASE_ADDR + 0x83c);
|
|
writel(0x0268023C, MMDC_P1_BASE_ADDR + 0x840);
|
|
writel(0x4034363A, MMDC_P0_BASE_ADDR + 0x848);
|
|
writel(0x36302C3C, MMDC_P1_BASE_ADDR + 0x848);
|
|
writel(0x3E3E4046, MMDC_P0_BASE_ADDR + 0x850);
|
|
writel(0x483A4844, MMDC_P1_BASE_ADDR + 0x850);
|
|
writel(0x33333333, MMDC_P0_BASE_ADDR + 0x81c);
|
|
writel(0x33333333, MMDC_P0_BASE_ADDR + 0x820);
|
|
writel(0x33333333, MMDC_P0_BASE_ADDR + 0x824);
|
|
writel(0x33333333, MMDC_P0_BASE_ADDR + 0x828);
|
|
writel(0x33333333, MMDC_P1_BASE_ADDR + 0x81c);
|
|
writel(0x33333333, MMDC_P1_BASE_ADDR + 0x820);
|
|
writel(0x33333333, MMDC_P1_BASE_ADDR + 0x824);
|
|
writel(0x33333333, MMDC_P1_BASE_ADDR + 0x828);
|
|
writel(0x24912489, MMDC_P0_BASE_ADDR + 0x8c0);
|
|
writel(0x24914452, MMDC_P1_BASE_ADDR + 0x8c0);
|
|
writel(0x00000800, MMDC_P0_BASE_ADDR + 0x8b8);
|
|
writel(0x00000800, MMDC_P1_BASE_ADDR + 0x8b8);
|
|
/* MMDC init: in DDR3, 64-bit mode, only MMDC0 is initiated */
|
|
writel(0x00020036, MMDC_P0_BASE_ADDR + 0x004);
|
|
writel(0x09444040, MMDC_P0_BASE_ADDR + 0x008);
|
|
writel(0x898E79A4, MMDC_P0_BASE_ADDR + 0x00c);
|
|
writel(0xDB538F64, MMDC_P0_BASE_ADDR + 0x010);
|
|
writel(0x01FF00DD, MMDC_P0_BASE_ADDR + 0x014);
|
|
writel(0x00011740, MMDC_P0_BASE_ADDR + 0x018);
|
|
writel(0x00008000, MMDC_P0_BASE_ADDR + 0x01c);
|
|
writel(0x000026D2, MMDC_P0_BASE_ADDR + 0x02c);
|
|
writel(0x008E1023, MMDC_P0_BASE_ADDR + 0x030);
|
|
writel(0x00000047, MMDC_P0_BASE_ADDR + 0x040);
|
|
writel(0x14420000, MMDC_P0_BASE_ADDR + 0x400);
|
|
writel(0x841A0000, MMDC_P0_BASE_ADDR + 0x000);
|
|
writel(0x00400c58, MMDC_P0_BASE_ADDR + 0x890);
|
|
/* add NOC DDR configuration */
|
|
writel(0x00000000, NOC_DDR_BASE_ADDR + 0x008);
|
|
writel(0x2871C39B, NOC_DDR_BASE_ADDR + 0x00c);
|
|
writel(0x000005B4, NOC_DDR_BASE_ADDR + 0x038);
|
|
writel(0x00000040, NOC_DDR_BASE_ADDR + 0x014);
|
|
writel(0x00000020, NOC_DDR_BASE_ADDR + 0x028);
|
|
writel(0x00000020, NOC_DDR_BASE_ADDR + 0x02c);
|
|
writel(0x02088032, MMDC_P0_BASE_ADDR + 0x01c);
|
|
writel(0x00008033, MMDC_P0_BASE_ADDR + 0x01c);
|
|
writel(0x00048031, MMDC_P0_BASE_ADDR + 0x01c);
|
|
writel(0x19308030, MMDC_P0_BASE_ADDR + 0x01c);
|
|
writel(0x04008040, MMDC_P0_BASE_ADDR + 0x01c);
|
|
writel(0x00007800, MMDC_P0_BASE_ADDR + 0x020);
|
|
writel(0x00022227, MMDC_P0_BASE_ADDR + 0x818);
|
|
writel(0x00022227, MMDC_P1_BASE_ADDR + 0x818);
|
|
writel(0x00025576, MMDC_P0_BASE_ADDR + 0x004);
|
|
writel(0x00011006, MMDC_P0_BASE_ADDR + 0x404);
|
|
writel(0x00000000, MMDC_P0_BASE_ADDR + 0x01c);
|
|
}
|
|
|
|
static void spl_dram_init(void)
|
|
{
|
|
if (is_mx6dqp()) {
|
|
mx6dq_dram_iocfg(64, &mx6qp_ddr_ioregs, &mx6qp_grp_ioregs);
|
|
spl_dram_init_imx6qp_lpddr3();
|
|
} else if (is_cpu_type(MXC_CPU_MX6SOLO)) {
|
|
mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
|
|
mx6_dram_cfg(&mem_s, &mx6s_512m_mmdc_calib, &h5tq2g63dfr);
|
|
} else if (is_cpu_type(MXC_CPU_MX6DL)) {
|
|
mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
|
|
mx6_dram_cfg(&mem_dl, &mx6dl_1g_mmdc_calib, &h5tq2g63dfr);
|
|
} else if (is_cpu_type(MXC_CPU_MX6Q)) {
|
|
mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
|
|
mx6_dram_cfg(&mem_q, &mx6q_2g_mmdc_calib, &h5t04g63afr);
|
|
}
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
ccgr_init();
|
|
|
|
/* setup AIPS and disable watchdog */
|
|
arch_cpu_init();
|
|
|
|
gpr_init();
|
|
|
|
/* iomux */
|
|
board_early_init_f();
|
|
|
|
/* setup GP timer */
|
|
timer_init();
|
|
|
|
/* UART clocks enabled and gd valid - init serial console */
|
|
preloader_console_init();
|
|
|
|
/* DDR initialization */
|
|
spl_dram_init();
|
|
}
|
|
#endif
|