u-boot/board/xilinx/versal/board.c
Michal Simek 47a766f950 arm64: versal: Move IOU_SWITCH_DIVISOR0 to Kconfig
Move hardcoded IOU_SWITCH_DIVISOR0 to Kconfig to be able to set it up
for different platforms.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-14 14:31:10 +01:00

85 lines
1.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2014 - 2018 Xilinx, Inc.
* Michal Simek <michal.simek@xilinx.com>
*/
#include <common.h>
#include <fdtdec.h>
#include <malloc.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
printf("EL Level:\tEL%d\n", current_el());
return 0;
}
int board_early_init_r(void)
{
u32 val;
if (current_el() != 3)
return 0;
debug("iou_switch ctrl div0 %x\n",
readl(&crlapb_base->iou_switch_ctrl));
writel(IOU_SWITCH_CTRL_CLKACT_BIT |
(CONFIG_IOU_SWITCH_DIVISOR0 << IOU_SWITCH_CTRL_DIVISOR0_SHIFT),
&crlapb_base->iou_switch_ctrl);
/* Global timer init - Program time stamp reference clk */
val = readl(&crlapb_base->timestamp_ref_ctrl);
val |= CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT;
writel(val, &crlapb_base->timestamp_ref_ctrl);
debug("ref ctrl 0x%x\n",
readl(&crlapb_base->timestamp_ref_ctrl));
/* Clear reset of timestamp reg */
writel(0, &crlapb_base->rst_timestamp);
/*
* Program freq register in System counter and
* enable system counter.
*/
writel(COUNTER_FREQUENCY,
&iou_scntr_secure->base_frequency_id_register);
debug("counter val 0x%x\n",
readl(&iou_scntr_secure->base_frequency_id_register));
writel(IOU_SCNTRS_CONTROL_EN,
&iou_scntr_secure->counter_control_register);
debug("scntrs control 0x%x\n",
readl(&iou_scntr_secure->counter_control_register));
debug("timer 0x%llx\n", get_ticks());
debug("timer 0x%llx\n", get_ticks());
return 0;
}
int dram_init_banksize(void)
{
fdtdec_setup_memory_banksize();
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_mem_size_base() != 0)
return -EINVAL;
return 0;
}
void reset_cpu(ulong addr)
{
}