Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-24 12:03:39 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/m68k/cpu/mcf5445x/cpu_init.c
Tom Rini 65cc0e2a65 global: Move remaining CONFIG_SYS_* to CFG_SYS_* 
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00

358 lines
8.7 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*/
#include <common.h>
#include <cpu_func.h>
#include <init.h>
#include <watchdog.h>
#include <asm/immap.h>
#include <asm/processor.h>
#include <asm/rtc.h>
#include <asm/io.h>
#include <linux/compiler.h>
#if defined(CONFIG_CMD_NET)
#include <config.h>
#include <net.h>
#include <asm/fec.h>
#endif
void init_fbcs(void)
{
fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS;
#if !defined(CONFIG_SERIAL_BOOT)
#if (defined(CFG_SYS_CS0_BASE) && defined(CFG_SYS_CS0_MASK) && defined(CFG_SYS_CS0_CTRL))
out_be32(&fbcs->csar0, CFG_SYS_CS0_BASE);
out_be32(&fbcs->cscr0, CFG_SYS_CS0_CTRL);
out_be32(&fbcs->csmr0, CFG_SYS_CS0_MASK);
#endif
#endif
#if (defined(CFG_SYS_CS1_BASE) && defined(CFG_SYS_CS1_MASK) && defined(CFG_SYS_CS1_CTRL))
/* Latch chipselect */
out_be32(&fbcs->csar1, CFG_SYS_CS1_BASE);
out_be32(&fbcs->cscr1, CFG_SYS_CS1_CTRL);
out_be32(&fbcs->csmr1, CFG_SYS_CS1_MASK);
#endif
#if (defined(CFG_SYS_CS2_BASE) && defined(CFG_SYS_CS2_MASK) && defined(CFG_SYS_CS2_CTRL))
out_be32(&fbcs->csar2, CFG_SYS_CS2_BASE);
out_be32(&fbcs->cscr2, CFG_SYS_CS2_CTRL);
out_be32(&fbcs->csmr2, CFG_SYS_CS2_MASK);
#endif
#if (defined(CFG_SYS_CS3_BASE) && defined(CFG_SYS_CS3_MASK) && defined(CFG_SYS_CS3_CTRL))
out_be32(&fbcs->csar3, CFG_SYS_CS3_BASE);
out_be32(&fbcs->cscr3, CFG_SYS_CS3_CTRL);
out_be32(&fbcs->csmr3, CFG_SYS_CS3_MASK);
#endif
#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
#endif
#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
#endif
}
#ifdef CONFIG_CF_DSPI
void cfspi_port_conf(void)
{
gpio_t *gpio = (gpio_t *)MMAP_GPIO;
#ifdef CONFIG_MCF5441x
pm_t *pm = (pm_t *)MMAP_PM;
out_8(&gpio->par_dspi0,
GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT |
GPIO_PAR_DSPI0_SCK_DSPI0SCK);
out_8(&gpio->srcr_dspiow, 3);
/* DSPI0 */
out_8(&pm->pmcr0, 23);
#endif
}
#endif
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
#ifdef CONFIG_MCF5441x
scm_t *scm = (scm_t *) MMAP_SCM;
pm_t *pm = (pm_t *) MMAP_PM;
/* Disable Switch */
*(unsigned long *)(MMAP_L2_SW0 + 0x00000024) = 0;
/* Disable core watchdog */
out_be16(&scm->cwcr, 0);
out_8(&gpio->par_fbctl,
GPIO_PAR_FBCTL_ALE_FB_ALE | GPIO_PAR_FBCTL_OE_FB_OE |
GPIO_PAR_FBCTL_FBCLK | GPIO_PAR_FBCTL_RW |
GPIO_PAR_FBCTL_TA_TA);
out_8(&gpio->par_be,
GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
/* eDMA */
out_8(&pm->pmcr0, 17);
/* INTR0 - INTR2 */
out_8(&pm->pmcr0, 18);
out_8(&pm->pmcr0, 19);
out_8(&pm->pmcr0, 20);
/* I2C */
out_8(&pm->pmcr0, 22);
out_8(&pm->pmcr1, 4);
out_8(&pm->pmcr1, 7);
/* DTMR0 - DTMR3*/
out_8(&pm->pmcr0, 28);
out_8(&pm->pmcr0, 29);
out_8(&pm->pmcr0, 30);
out_8(&pm->pmcr0, 31);
/* PIT0 - PIT3 */
out_8(&pm->pmcr0, 32);
out_8(&pm->pmcr0, 33);
out_8(&pm->pmcr0, 34);
out_8(&pm->pmcr0, 35);
/* Edge Port */
out_8(&pm->pmcr0, 36);
out_8(&pm->pmcr0, 37);
/* USB OTG */
out_8(&pm->pmcr0, 44);
/* USB Host */
out_8(&pm->pmcr0, 45);
/* ESDHC */
out_8(&pm->pmcr0, 51);
/* ENET0 - ENET1 */
out_8(&pm->pmcr0, 53);
out_8(&pm->pmcr0, 54);
/* NAND */
out_8(&pm->pmcr0, 63);
#ifdef CONFIG_SYS_I2C_0
out_8(&gpio->par_cani2c, 0xF0);
/* I2C0 pull up */
out_be16(&gpio->pcr_b, 0x003C);
/* I2C0 max speed */
out_8(&gpio->srcr_cani2c, 0x03);
#endif
#ifdef CONFIG_SYS_I2C_2
/* I2C2 */
out_8(&gpio->par_ssi0h, 0xA0);
/* I2C2, UART7 */
out_8(&gpio->par_ssi0h, 0xA8);
/* UART7 */
out_8(&gpio->par_ssi0l, 0x2);
/* UART8, UART9 */
out_8(&gpio->par_cani2c, 0xAA);
/* UART4, UART0 */
out_8(&gpio->par_uart0, 0xAF);
/* UART5, UART1 */
out_8(&gpio->par_uart1, 0xAF);
/* UART6, UART2 */
out_8(&gpio->par_uart2, 0xAF);
/* I2C2 pull up */
out_be16(&gpio->pcr_h, 0xF000);
#endif
#ifdef CONFIG_SYS_I2C_5
/* I2C5 */
out_8(&gpio->par_uart1, 0x0A);
/* I2C5 pull up */
out_be16(&gpio->pcr_e, 0x0003);
out_be16(&gpio->pcr_f, 0xC000);
#endif
/* Lowest slew rate for UART0,1,2 */
out_8(&gpio->srcr_uart, 0x00);
#ifdef CONFIG_FSL_ESDHC_IMX
/* eSDHC pin as faster speed */
out_8(&gpio->srcr_sdhc, 0x03);
/* All esdhc pins as SD */
out_8(&gpio->par_sdhch, 0xff);
out_8(&gpio->par_sdhcl, 0xff);
#endif
#endif /* CONFIG_MCF5441x */
/* FlexBus Chipselect */
init_fbcs();
#ifdef CFG_SYS_CS0_BASE
/*
* now the flash base address is no longer at 0 (Newer ColdFire family
* boot at address 0 instead of 0xFFnn_nnnn). The vector table must
* also move to the new location.
*/
if (CFG_SYS_CS0_BASE != 0)
setvbr(CFG_SYS_CS0_BASE);
#endif
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
#ifdef CONFIG_MCFRTC
rtc_t *rtc = (rtc_t *)(CONFIG_SYS_MCFRTC_BASE);
rtcex_t *rtcex = (rtcex_t *)&rtc->extended;
out_be32(&rtcex->gocu, (CONFIG_SYS_RTC_OSCILLATOR >> 16) & 0xffff);
out_be32(&rtcex->gocl, CONFIG_SYS_RTC_OSCILLATOR & 0xffff);
#endif
return (0);
}
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
#ifdef CONFIG_MCF5441x
pm_t *pm = (pm_t *) MMAP_PM;
#endif
/* Setup Ports: */
switch (port) {
#ifdef CONFIG_MCF5441x
case 0:
/* UART0 */
out_8(&pm->pmcr0, 24);
clrbits_8(&gpio->par_uart0,
~(GPIO_PAR_UART0_U0RXD_MASK | GPIO_PAR_UART0_U0TXD_MASK));
setbits_8(&gpio->par_uart0,
GPIO_PAR_UART0_U0RXD_U0RXD | GPIO_PAR_UART0_U0TXD_U0TXD);
break;
case 1:
/* UART1 */
out_8(&pm->pmcr0, 25);
clrbits_8(&gpio->par_uart1,
~(GPIO_PAR_UART1_U1RXD_MASK | GPIO_PAR_UART1_U1TXD_MASK));
setbits_8(&gpio->par_uart1,
GPIO_PAR_UART1_U1RXD_U1RXD | GPIO_PAR_UART1_U1TXD_U1TXD);
break;
case 2:
/* UART2 */
out_8(&pm->pmcr0, 26);
clrbits_8(&gpio->par_uart2,
~(GPIO_PAR_UART2_U2RXD_MASK | GPIO_PAR_UART2_U2TXD_MASK));
setbits_8(&gpio->par_uart2,
GPIO_PAR_UART2_U2RXD_U2RXD | GPIO_PAR_UART2_U2TXD_U2TXD);
break;
case 3:
/* UART3 */
out_8(&pm->pmcr0, 27);
clrbits_8(&gpio->par_dspi0,
~(GPIO_PAR_DSPI0_SIN_MASK | GPIO_PAR_DSPI0_SOUT_MASK));
setbits_8(&gpio->par_dspi0,
GPIO_PAR_DSPI0_SIN_U3RXD | GPIO_PAR_DSPI0_SOUT_U3TXD);
break;
case 4:
/* UART4 */
out_8(&pm->pmcr1, 24);
clrbits_8(&gpio->par_uart0,
~(GPIO_PAR_UART0_U0CTS_MASK | GPIO_PAR_UART0_U0RTS_MASK));
setbits_8(&gpio->par_uart0,
GPIO_PAR_UART0_U0CTS_U4TXD | GPIO_PAR_UART0_U0RTS_U4RXD);
break;
case 5:
/* UART5 */
out_8(&pm->pmcr1, 25);
clrbits_8(&gpio->par_uart1,
~(GPIO_PAR_UART1_U1CTS_MASK | GPIO_PAR_UART1_U1RTS_MASK));
setbits_8(&gpio->par_uart1,
GPIO_PAR_UART1_U1CTS_U5TXD | GPIO_PAR_UART1_U1RTS_U5RXD);
break;
case 6:
/* UART6 */
out_8(&pm->pmcr1, 26);
clrbits_8(&gpio->par_uart2,
~(GPIO_PAR_UART2_U2CTS_MASK | GPIO_PAR_UART2_U2RTS_MASK));
setbits_8(&gpio->par_uart2,
GPIO_PAR_UART2_U2CTS_U6TXD | GPIO_PAR_UART2_U2RTS_U6RXD);
break;
case 7:
/* UART7 */
out_8(&pm->pmcr1, 27);
clrbits_8(&gpio->par_ssi0h, ~GPIO_PAR_SSI0H_RXD_MASK);
clrbits_8(&gpio->par_ssi0l, ~GPIO_PAR_SSI0L_BCLK_MASK);
setbits_8(&gpio->par_ssi0h, GPIO_PAR_SSI0H_FS_U7TXD);
setbits_8(&gpio->par_ssi0l, GPIO_PAR_SSI0L_BCLK_U7RXD);
break;
case 8:
/* UART8 */
out_8(&pm->pmcr0, 28);
clrbits_8(&gpio->par_cani2c,
~(GPIO_PAR_CANI2C_I2C0SCL_MASK | GPIO_PAR_CANI2C_I2C0SDA_MASK));
setbits_8(&gpio->par_cani2c,
GPIO_PAR_CANI2C_I2C0SCL_U8TXD | GPIO_PAR_CANI2C_I2C0SDA_U8RXD);
break;
case 9:
/* UART9 */
out_8(&pm->pmcr1, 29);
clrbits_8(&gpio->par_cani2c,
~(GPIO_PAR_CANI2C_CAN1TX_MASK | GPIO_PAR_CANI2C_CAN1RX_MASK));
setbits_8(&gpio->par_cani2c,
GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD);
break;
#endif
}
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(fec_info_t *info, int setclear)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
u32 fec0_base;
if (fec_get_base_addr(0, &fec0_base))
return -1;
#ifdef CONFIG_MCF5441x
if (setclear) {
out_8(&gpio->par_fec, 0x03);
out_8(&gpio->srcr_fec, 0x0F);
clrsetbits_8(&gpio->par_simp0h, ~GPIO_PAR_SIMP0H_DAT_MASK,
GPIO_PAR_SIMP0H_DAT_GPIO);
clrsetbits_8(&gpio->pddr_g, ~GPIO_PDDR_G4_MASK,
GPIO_PDDR_G4_OUTPUT);
clrbits_8(&gpio->podr_g, ~GPIO_PODR_G4_MASK);
} else
clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC_MASK);
#endif
return 0;
}
#endif
Reference in a new issue View git blame Copy permalink