u-boot/board/freescale/p2041rdb/p2041rdb.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

240 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2011,2012 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <command.h>
#include <netdev.h>
#include <linux/compiler.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
extern void pci_of_setup(void *blob, bd_t *bd);
#include "cpld.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
u8 sw;
struct cpu_type *cpu = gd->arch.cpu;
unsigned int i;
printf("Board: %sRDB, ", cpu->name);
printf("CPLD version: %d.%d ", CPLD_READ(cpld_ver),
CPLD_READ(cpld_ver_sub));
sw = CPLD_READ(fbank_sel);
printf("vBank: %d\n", sw & 0x1);
/*
* Display the actual SERDES reference clocks as configured by the
* dip switches on the board. Note that the SWx registers could
* technically be set to force the reference clocks to match the
* values that the SERDES expects (or vice versa). For now, however,
* we just display both values and hope the user notices when they
* don't match.
*/
puts("SERDES Reference Clocks: ");
sw = in_8(&CPLD_SW(2)) >> 2;
for (i = 0; i < 2; i++) {
static const char * const freq[][3] = {{"0", "100", "125"},
{"100", "156.25", "125"}
};
unsigned int clock = (sw >> (2 * i)) & 3;
printf("Bank%u=%sMhz ", i+1, freq[i][clock]);
}
puts("\n");
return 0;
}
int board_early_init_f(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* board only uses the DDR_MCK0/1, so disable the DDR_MCK2/3 */
setbits_be32(&gur->ddrclkdr, 0x000f000f);
return 0;
}
#define CPLD_LANE_A_SEL 0x1
#define CPLD_LANE_G_SEL 0x2
#define CPLD_LANE_C_SEL 0x4
#define CPLD_LANE_D_SEL 0x8
void board_config_lanes_mux(void)
{
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
u8 mux = 0;
switch (srds_prtcl) {
case 0x2:
case 0x5:
case 0x9:
case 0xa:
case 0xf:
break;
case 0x8:
mux |= CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
break;
case 0x14:
mux |= CPLD_LANE_A_SEL;
break;
case 0x17:
mux |= CPLD_LANE_G_SEL;
break;
case 0x16:
case 0x19:
case 0x1a:
mux |= CPLD_LANE_G_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
break;
case 0x1c:
mux |= CPLD_LANE_G_SEL | CPLD_LANE_A_SEL;
break;
default:
printf("Fman:Unsupported SerDes Protocol 0x%02x\n", srds_prtcl);
break;
}
CPLD_WRITE(serdes_mux, mux);
}
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
int flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash + PROMJET region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
if (flash_esel == -1) {
/* very unlikely unless something is messed up */
puts("Error: Could not find TLB for FLASH BASE\n");
flash_esel = 2; /* give our best effort to continue */
} else {
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
}
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
board_config_lanes_mux();
return 0;
}
unsigned long get_board_sys_clk(unsigned long dummy)
{
u8 sysclk_conf = CPLD_READ(sysclk_sw1);
switch (sysclk_conf & 0x7) {
case CPLD_SYSCLK_83:
return 83333333;
case CPLD_SYSCLK_100:
return 100000000;
default:
return 66666666;
}
}
#define NUM_SRDS_BANKS 2
int misc_init_r(void)
{
serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
u32 actual[NUM_SRDS_BANKS];
unsigned int i;
u8 sw;
static const int freq[][3] = {
{0, SRDS_PLLCR0_RFCK_SEL_100, SRDS_PLLCR0_RFCK_SEL_125},
{SRDS_PLLCR0_RFCK_SEL_100, SRDS_PLLCR0_RFCK_SEL_156_25,
SRDS_PLLCR0_RFCK_SEL_125}
};
sw = in_8(&CPLD_SW(2)) >> 2;
for (i = 0; i < NUM_SRDS_BANKS; i++) {
unsigned int clock = (sw >> (2 * i)) & 3;
if (clock == 0x3) {
printf("Warning: SDREFCLK%u switch setting of '11' is "
"unsupported\n", i + 1);
break;
}
if (i == 0 && clock == 0)
puts("Warning: SDREFCLK1 switch setting of"
"'00' is unsupported\n");
else
actual[i] = freq[i][clock];
/*
* PC board uses a different CPLD with PB board, this CPLD
* has cpld_ver_sub = 1, and pcba_ver = 5. But CPLD on PB
* board has cpld_ver_sub = 0, and pcba_ver = 4.
*/
if ((i == 1) && (CPLD_READ(cpld_ver_sub) == 1) &&
(CPLD_READ(pcba_ver) == 5)) {
/* PC board bank2 frequency */
actual[i] = freq[i-1][clock];
}
}
for (i = 0; i < NUM_SRDS_BANKS; i++) {
u32 expected = in_be32(&regs->bank[i].pllcr0);
expected &= SRDS_PLLCR0_RFCK_SEL_MASK;
if (expected != actual[i]) {
printf("Warning: SERDES bank %u expects reference clock"
" %sMHz, but actual is %sMHz\n", i + 1,
serdes_clock_to_string(expected),
serdes_clock_to_string(actual[i]));
}
}
return 0;
}
int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = env_get_bootm_low();
size = env_get_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
fsl_fdt_fixup_dr_usb(blob, bd);
#endif
#ifdef CONFIG_PCI
pci_of_setup(blob, bd);
#endif
fdt_fixup_liodn(blob);
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
#endif
return 0;
}