mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
152 lines
5.2 KiB
C
152 lines
5.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <common.h>
|
|
#include <fsl_dcu_fb.h>
|
|
#include <i2c.h>
|
|
#include <linux/fb.h>
|
|
|
|
#define PIXEL_CLK_LSB_REG 0x00
|
|
#define PIXEL_CLK_MSB_REG 0x01
|
|
#define VERT_FREQ_LSB_REG 0x02
|
|
#define VERT_FREQ_MSB_REG 0x03
|
|
#define TOTAL_PIXELS_LSB_REG 0x04
|
|
#define TOTAL_PIXELS_MSB_REG 0x05
|
|
#define TOTAL_LINES_LSB_REG 0x06
|
|
#define TOTAL_LINES_MSB_REG 0x07
|
|
#define TPI_INBUS_FMT_REG 0x08
|
|
#define TPI_INPUT_FMT_REG 0x09
|
|
#define TPI_OUTPUT_FMT_REG 0x0A
|
|
#define TPI_SYS_CTRL_REG 0x1A
|
|
#define TPI_PWR_STAT_REG 0x1E
|
|
#define TPI_AUDIO_HANDING_REG 0x25
|
|
#define TPI_AUDIO_INTF_REG 0x26
|
|
#define TPI_AUDIO_FREQ_REG 0x27
|
|
#define TPI_SET_PAGE_REG 0xBC
|
|
#define TPI_SET_OFFSET_REG 0xBD
|
|
#define TPI_RW_ACCESS_REG 0xBE
|
|
#define TPI_TRANS_MODE_REG 0xC7
|
|
|
|
#define TPI_INBUS_CLOCK_RATIO_1 (1 << 6)
|
|
#define TPI_INBUS_FULL_PIXEL_WIDE (1 << 5)
|
|
#define TPI_INBUS_RISING_EDGE (1 << 4)
|
|
#define TPI_INPUT_CLR_DEPTH_8BIT (0 << 6)
|
|
#define TPI_INPUT_VRANGE_EXPAN_AUTO (0 << 2)
|
|
#define TPI_INPUT_CLR_RGB (0 << 0)
|
|
#define TPI_OUTPUT_CLR_DEPTH_8BIT (0 << 6)
|
|
#define TPI_OUTPUT_VRANGE_COMPRE_AUTO (0 << 2)
|
|
#define TPI_OUTPUT_CLR_HDMI_RGB (0 << 0)
|
|
#define TPI_SYS_TMDS_OUTPUT (0 << 4)
|
|
#define TPI_SYS_AV_NORAML (0 << 3)
|
|
#define TPI_SYS_AV_MUTE (1 << 3)
|
|
#define TPI_SYS_DVI_MODE (0 << 0)
|
|
#define TPI_SYS_HDMI_MODE (1 << 0)
|
|
#define TPI_PWR_STAT_MASK (3 << 0)
|
|
#define TPI_PWR_STAT_D0 (0 << 0)
|
|
#define TPI_AUDIO_PASS_BASIC (0 << 0)
|
|
#define TPI_AUDIO_INTF_I2S (2 << 6)
|
|
#define TPI_AUDIO_INTF_NORMAL (0 << 4)
|
|
#define TPI_AUDIO_TYPE_PCM (1 << 0)
|
|
#define TPI_AUDIO_SAMP_SIZE_16BIT (1 << 6)
|
|
#define TPI_AUDIO_SAMP_FREQ_44K (2 << 3)
|
|
#define TPI_SET_PAGE_SII9022A 0x01
|
|
#define TPI_SET_OFFSET_SII9022A 0x82
|
|
#define TPI_RW_EN_SRC_TERMIN (1 << 0)
|
|
#define TPI_TRANS_MODE_ENABLE (0 << 7)
|
|
|
|
/* Programming of Silicon SIi9022a HDMI Transmitter */
|
|
int dcu_set_dvi_encoder(struct fb_videomode *videomode)
|
|
{
|
|
u8 temp;
|
|
u16 temp1, temp2;
|
|
u32 temp3;
|
|
|
|
i2c_set_bus_num(CONFIG_SYS_I2C_DVI_BUS_NUM);
|
|
|
|
/* Enable TPI transmitter mode */
|
|
temp = TPI_TRANS_MODE_ENABLE;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_TRANS_MODE_REG, 1, &temp, 1);
|
|
|
|
/* Enter into D0 state, full operation */
|
|
i2c_read(CONFIG_SYS_I2C_DVI_ADDR, TPI_PWR_STAT_REG, 1, &temp, 1);
|
|
temp &= ~TPI_PWR_STAT_MASK;
|
|
temp |= TPI_PWR_STAT_D0;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_PWR_STAT_REG, 1, &temp, 1);
|
|
|
|
/* Enable source termination */
|
|
temp = TPI_SET_PAGE_SII9022A;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_SET_PAGE_REG, 1, &temp, 1);
|
|
temp = TPI_SET_OFFSET_SII9022A;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_SET_OFFSET_REG, 1, &temp, 1);
|
|
|
|
i2c_read(CONFIG_SYS_I2C_DVI_ADDR, TPI_RW_ACCESS_REG, 1, &temp, 1);
|
|
temp |= TPI_RW_EN_SRC_TERMIN;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_RW_ACCESS_REG, 1, &temp, 1);
|
|
|
|
/* Set TPI system control */
|
|
temp = TPI_SYS_TMDS_OUTPUT | TPI_SYS_AV_NORAML | TPI_SYS_DVI_MODE;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_SYS_CTRL_REG, 1, &temp, 1);
|
|
|
|
/* Set pixel clock */
|
|
temp1 = PICOS2KHZ(videomode->pixclock) / 10;
|
|
temp = (u8)(temp1 & 0xFF);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, PIXEL_CLK_LSB_REG, 1, &temp, 1);
|
|
temp = (u8)(temp1 >> 8);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, PIXEL_CLK_MSB_REG, 1, &temp, 1);
|
|
|
|
/* Set total pixels per line */
|
|
temp1 = videomode->hsync_len + videomode->left_margin +
|
|
videomode->xres + videomode->right_margin;
|
|
temp = (u8)(temp1 & 0xFF);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TOTAL_PIXELS_LSB_REG, 1, &temp, 1);
|
|
temp = (u8)(temp1 >> 8);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TOTAL_PIXELS_MSB_REG, 1, &temp, 1);
|
|
|
|
/* Set total lines */
|
|
temp2 = videomode->vsync_len + videomode->upper_margin +
|
|
videomode->yres + videomode->lower_margin;
|
|
temp = (u8)(temp2 & 0xFF);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TOTAL_LINES_LSB_REG, 1, &temp, 1);
|
|
temp = (u8)(temp2 >> 8);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TOTAL_LINES_MSB_REG, 1, &temp, 1);
|
|
|
|
/* Set vertical frequency in Hz */
|
|
temp3 = temp1 * temp2;
|
|
temp3 = (PICOS2KHZ(videomode->pixclock) * 1000) / temp3;
|
|
temp1 = (u16)temp3 * 100;
|
|
temp = (u8)(temp1 & 0xFF);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, VERT_FREQ_LSB_REG, 1, &temp, 1);
|
|
temp = (u8)(temp1 >> 8);
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, VERT_FREQ_MSB_REG, 1, &temp, 1);
|
|
|
|
/* Set TPI input bus and pixel repetition data */
|
|
temp = TPI_INBUS_CLOCK_RATIO_1 | TPI_INBUS_FULL_PIXEL_WIDE |
|
|
TPI_INBUS_RISING_EDGE;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_INBUS_FMT_REG, 1, &temp, 1);
|
|
|
|
/* Set TPI AVI Input format data */
|
|
temp = TPI_INPUT_CLR_DEPTH_8BIT | TPI_INPUT_VRANGE_EXPAN_AUTO |
|
|
TPI_INPUT_CLR_RGB;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_INPUT_FMT_REG, 1, &temp, 1);
|
|
|
|
/* Set TPI AVI Output format data */
|
|
temp = TPI_OUTPUT_CLR_DEPTH_8BIT | TPI_OUTPUT_VRANGE_COMPRE_AUTO |
|
|
TPI_OUTPUT_CLR_HDMI_RGB;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_OUTPUT_FMT_REG, 1, &temp, 1);
|
|
|
|
/* Set TPI audio configuration write data */
|
|
temp = TPI_AUDIO_PASS_BASIC;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_AUDIO_HANDING_REG, 1, &temp, 1);
|
|
|
|
temp = TPI_AUDIO_INTF_I2S | TPI_AUDIO_INTF_NORMAL |
|
|
TPI_AUDIO_TYPE_PCM;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_AUDIO_INTF_REG, 1, &temp, 1);
|
|
|
|
temp = TPI_AUDIO_SAMP_SIZE_16BIT | TPI_AUDIO_SAMP_FREQ_44K;
|
|
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_AUDIO_FREQ_REG, 1, &temp, 1);
|
|
|
|
return 0;
|
|
}
|