Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 02:38:56 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-omap2/am33xx/board.c
Tom Rini 6815a66ad7 am33xx: musb: Remove unused configuration logic 
At this point DM and OF_CONTROL are used to configure how the USB ports
are enabled, with the exception of in SPL and no SPL_OF_CONTROL.  Remove
a bunch of now unused logic to simplify the code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:45 -04:00

538 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* board.c
*
* Common board functions for AM33XX based boards
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*/
#include <common.h>
#include <dm.h>
#include <debug_uart.h>
#include <errno.h>
#include <event.h>
#include <init.h>
#include <net.h>
#include <ns16550.h>
#include <omap3_spi.h>
#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/omap.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/i2c.h>
#if IS_ENABLED(CONFIG_TARGET_AM335X_GUARDIAN)
#include <asm/arch/mem-guardian.h>
#else
#include <asm/arch/mem.h>
#endif
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/emif.h>
#include <asm/gpio.h>
#include <asm/omap_common.h>
#include <i2c.h>
#include <miiphy.h>
#include <cpsw.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/compiler.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/musb.h>
#include <asm/omap_musb.h>
#include <asm/davinci_rtc.h>
#define AM43XX_EMIF_BASE 0x4C000000
#define AM43XX_SDRAM_CONFIG_OFFSET 0x8
#define AM43XX_SDRAM_TYPE_MASK 0xE0000000
#define AM43XX_SDRAM_TYPE_SHIFT 29
#define AM43XX_SDRAM_TYPE_DDR3 3
#define AM43XX_READ_WRITE_LEVELING_CTRL_OFFSET 0xDC
#define AM43XX_RDWRLVLFULL_START 0x80000000
/* SPI flash. */
#if CONFIG_IS_ENABLED(DM_SPI) && !CONFIG_IS_ENABLED(OF_CONTROL)
#define AM33XX_SPI0_BASE 0x48030000
#define AM33XX_SPI0_OFFSET (AM33XX_SPI0_BASE + OMAP4_MCSPI_REG_OFFSET)
#endif
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
sdram_init();
#endif
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size(
(void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
return 0;
}
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct ns16550_plat am33xx_serial[] = {
{ .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
# ifdef CONFIG_SYS_NS16550_COM2
{ .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
# ifdef CONFIG_SYS_NS16550_COM3
{ .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
{ .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
{ .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
{ .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2,
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
# endif
# endif
};
U_BOOT_DRVINFOS(am33xx_uarts) = {
{ "ns16550_serial", &am33xx_serial[0] },
# ifdef CONFIG_SYS_NS16550_COM2
{ "ns16550_serial", &am33xx_serial[1] },
# ifdef CONFIG_SYS_NS16550_COM3
{ "ns16550_serial", &am33xx_serial[2] },
{ "ns16550_serial", &am33xx_serial[3] },
{ "ns16550_serial", &am33xx_serial[4] },
{ "ns16550_serial", &am33xx_serial[5] },
# endif
# endif
};
#if CONFIG_IS_ENABLED(DM_I2C)
static const struct omap_i2c_plat am33xx_i2c[] = {
{ I2C_BASE1, 100000, OMAP_I2C_REV_V2},
{ I2C_BASE2, 100000, OMAP_I2C_REV_V2},
{ I2C_BASE3, 100000, OMAP_I2C_REV_V2},
};
U_BOOT_DRVINFOS(am33xx_i2c) = {
{ "i2c_omap", &am33xx_i2c[0] },
{ "i2c_omap", &am33xx_i2c[1] },
{ "i2c_omap", &am33xx_i2c[2] },
};
#endif
#if CONFIG_IS_ENABLED(DM_GPIO)
static const struct omap_gpio_plat am33xx_gpio[] = {
{ 0, AM33XX_GPIO0_BASE },
{ 1, AM33XX_GPIO1_BASE },
{ 2, AM33XX_GPIO2_BASE },
{ 3, AM33XX_GPIO3_BASE },
#ifdef CONFIG_AM43XX
{ 4, AM33XX_GPIO4_BASE },
{ 5, AM33XX_GPIO5_BASE },
#endif
};
U_BOOT_DRVINFOS(am33xx_gpios) = {
{ "gpio_omap", &am33xx_gpio[0] },
{ "gpio_omap", &am33xx_gpio[1] },
{ "gpio_omap", &am33xx_gpio[2] },
{ "gpio_omap", &am33xx_gpio[3] },
#ifdef CONFIG_AM43XX
{ "gpio_omap", &am33xx_gpio[4] },
{ "gpio_omap", &am33xx_gpio[5] },
#endif
};
#endif
#if CONFIG_IS_ENABLED(DM_SPI) && !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct omap3_spi_plat omap3_spi_pdata = {
.regs = (struct mcspi *)AM33XX_SPI0_OFFSET,
.pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT,
};
U_BOOT_DRVINFO(am33xx_spi) = {
.name = "omap3_spi",
.plat = &omap3_spi_pdata,
};
#endif
#endif
#if !CONFIG_IS_ENABLED(DM_GPIO)
static const struct gpio_bank gpio_bank_am33xx[] = {
{ (void *)AM33XX_GPIO0_BASE },
{ (void *)AM33XX_GPIO1_BASE },
{ (void *)AM33XX_GPIO2_BASE },
{ (void *)AM33XX_GPIO3_BASE },
#ifdef CONFIG_AM43XX
{ (void *)AM33XX_GPIO4_BASE },
{ (void *)AM33XX_GPIO5_BASE },
#endif
};
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
#endif
#if defined(CONFIG_MMC_OMAP_HS)
int cpu_mmc_init(struct bd_info *bis)
{
int ret;
ret = omap_mmc_init(0, 0, 0, -1, -1);
if (ret)
return ret;
return omap_mmc_init(1, 0, 0, -1, -1);
}
#endif
/*
* RTC only with DDR in self-refresh mode magic value, checked against during
* boot to see if we have a valid config. This should be in sync with the value
* that will be in drivers/soc/ti/pm33xx.c.
*/
#define RTC_MAGIC_VAL 0x8cd0
/* Board type field bit shift for RTC only with DDR in self-refresh mode */
#define RTC_BOARD_TYPE_SHIFT 16
/* AM33XX has two MUSB controllers which can be host or gadget */
#if (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \
defined(CONFIG_SPL_BUILD)
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
.dyn_fifo = 1,
.num_eps = 16,
.ram_bits = 12,
};
#ifdef CONFIG_AM335X_USB0
static struct ti_musb_plat usb0 = {
.base = (void *)USB0_OTG_BASE,
.ctrl_mod_base = &((struct ctrl_dev *)CTRL_DEVICE_BASE)->usb_ctrl0,
.plat = {
.config = &musb_config,
.power = 50,
.platform_ops = &musb_dsps_ops,
},
};
#endif
#ifdef CONFIG_AM335X_USB1
static struct ti_musb_plat usb1 = {
.base = (void *)USB1_OTG_BASE,
.ctrl_mod_base = &((struct ctrl_dev *)CTRL_DEVICE_BASE)->usb_ctrl1,
.plat = {
.config = &musb_config,
.power = 50,
.platform_ops = &musb_dsps_ops,
},
};
#endif
U_BOOT_DRVINFOS(am33xx_usbs) = {
#ifdef CONFIG_AM335X_USB0_PERIPHERAL
{ "ti-musb-peripheral", &usb0 },
#elif defined(CONFIG_AM335X_USB0_HOST)
{ "ti-musb-host", &usb0 },
#endif
#ifdef CONFIG_AM335X_USB1_PERIPHERAL
{ "ti-musb-peripheral", &usb1 },
#elif defined(CONFIG_AM335X_USB1_HOST)
{ "ti-musb-host", &usb1 },
#endif
};
int arch_misc_init(void)
{
return 0;
}
#else /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
int arch_misc_init(void)
{
struct udevice *dev;
int ret;
ret = uclass_first_device(UCLASS_MISC, &dev);
if (ret || !dev)
return ret;
#if defined(CONFIG_DM_ETH) && defined(CONFIG_USB_ETHER)
ret = usb_ether_init();
if (ret) {
pr_err("USB ether init failed\n");
return ret;
}
#endif
return 0;
}
#endif /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) || \
(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT))
static void rtc32k_unlock(struct davinci_rtc *rtc)
{
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
writel(RTC_KICK0R_WE, &rtc->kick0r);
writel(RTC_KICK1R_WE, &rtc->kick1r);
}
#endif
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
/*
* Write contents of the RTC_SCRATCH1 register based on board type
* Two things are passed
* on. First 16 bits (0:15) are written with RTC_MAGIC value. Once the
* control gets to kernel, kernel reads the scratchpad register and gets to
* know that bootloader has rtc_only support.
*
* Second important thing is the board type (16:31). This is needed in the
* rtc_only boot where in we want to avoid costly i2c reads to eeprom to
* identify the board type and we go ahead and copy the board strings to
* am43xx_board_name.
*/
void update_rtc_magic(void)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
u32 magic = RTC_MAGIC_VAL;
magic |= (rtc_only_get_board_type() << RTC_BOARD_TYPE_SHIFT);
rtc32k_unlock(rtc);
/* write magic */
writel(magic, &rtc->scratch1);
}
#endif
/*
* In the case of non-SPL based booting we'll want to call these
* functions a tiny bit later as it will require gd to be set and cleared
* and that's not true in s_init in this case so we cannot do it there.
*/
int board_early_init_f(void)
{
set_mux_conf_regs();
prcm_init();
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
update_rtc_magic();
#endif
return 0;
}
/*
* This function is the place to do per-board things such as ramp up the
* MPU clock frequency.
*/
__weak void am33xx_spl_board_init(void)
{
}
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
static void rtc32k_enable(void)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
rtc32k_unlock(rtc);
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
}
#endif
static void uart_soft_reset(void)
{
struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
u32 regval;
regval = readl(&uart_base->uartsyscfg);
regval |= UART_RESET;
writel(regval, &uart_base->uartsyscfg);
while ((readl(&uart_base->uartsyssts) &
UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
;
/* Disable smart idle */
regval = readl(&uart_base->uartsyscfg);
regval |= UART_SMART_IDLE_EN;
writel(regval, &uart_base->uartsyscfg);
}
static void watchdog_disable(void)
{
struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
writel(0xAAAA, &wdtimer->wdtwspr);
while (readl(&wdtimer->wdtwwps) != 0x0)
;
writel(0x5555, &wdtimer->wdtwspr);
while (readl(&wdtimer->wdtwwps) != 0x0)
;
}
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
/*
* Check if we are executing rtc-only + DDR mode, and resume from it if needed
*/
static void rtc_only(void)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
struct prm_device_inst *prm_device =
(struct prm_device_inst *)PRM_DEVICE_INST;
u32 scratch1, sdrc;
void (*resume_func)(void);
scratch1 = readl(&rtc->scratch1);
/*
* Check RTC scratch against RTC_MAGIC_VAL, RTC_MAGIC_VAL is only
* written to this register when we want to wake up from RTC only
* with DDR in self-refresh mode. Contents of the RTC_SCRATCH1:
* bits 0-15: RTC_MAGIC_VAL
* bits 16-31: board type (needed for sdram_init)
*/
if ((scratch1 & 0xffff) != RTC_MAGIC_VAL)
return;
rtc32k_unlock(rtc);
/* Clear RTC magic */
writel(0, &rtc->scratch1);
/*
* Update board type based on value stored on RTC_SCRATCH1, this
* is done so that we don't need to read the board type from eeprom
* over i2c bus which is expensive
*/
rtc_only_update_board_type(scratch1 >> RTC_BOARD_TYPE_SHIFT);
/*
* Enable EMIF_DEVOFF in PRCM_PRM_EMIF_CTRL to indicate to EMIF we
* are resuming from self-refresh. This avoids an unnecessary re-init
* of the DDR. The re-init takes time and we would need to wait for
* it to complete before accessing DDR to avoid L3 NOC errors.
*/
writel(EMIF_CTRL_DEVOFF, &prm_device->emif_ctrl);
rtc_only_prcm_init();
sdram_init();
/* Check EMIF4D_SDRAM_CONFIG[31:29] SDRAM_TYPE */
/* Only perform leveling if SDRAM_TYPE = 3 (DDR3) */
sdrc = readl(AM43XX_EMIF_BASE + AM43XX_SDRAM_CONFIG_OFFSET);
sdrc &= AM43XX_SDRAM_TYPE_MASK;
sdrc >>= AM43XX_SDRAM_TYPE_SHIFT;
if (sdrc == AM43XX_SDRAM_TYPE_DDR3) {
writel(AM43XX_RDWRLVLFULL_START,
AM43XX_EMIF_BASE +
AM43XX_READ_WRITE_LEVELING_CTRL_OFFSET);
mdelay(1);
am43xx_wait:
sdrc = readl(AM43XX_EMIF_BASE +
AM43XX_READ_WRITE_LEVELING_CTRL_OFFSET);
if (sdrc == AM43XX_RDWRLVLFULL_START)
goto am43xx_wait;
}
resume_func = (void *)readl(&rtc->scratch0);
if (resume_func)
resume_func();
}
#endif
void s_init(void)
{
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
rtc_only();
#endif
}
void early_system_init(void)
{
/*
* The ROM will only have set up sufficient pinmux to allow for the
* first 4KiB NOR to be read, we must finish doing what we know of
* the NOR mux in this space in order to continue.
*/
#ifdef CONFIG_NOR_BOOT
enable_norboot_pin_mux();
#endif
watchdog_disable();
set_uart_mux_conf();
setup_early_clocks();
uart_soft_reset();
#ifdef CONFIG_SPL_BUILD
/*
* Save the boot parameters passed from romcode.
* We cannot delay the saving further than this,
* to prevent overwrites.
*/
save_omap_boot_params();
#endif
#ifdef CONFIG_DEBUG_UART_OMAP
debug_uart_init();
#endif
#ifdef CONFIG_SPL_BUILD
spl_early_init();
#endif
#ifdef CONFIG_TI_I2C_BOARD_DETECT
do_board_detect();
#endif
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
/* Enable RTC32K clock */
rtc32k_enable();
#endif
}
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong dummy)
{
hw_data_init();
early_system_init();
board_early_init_f();
sdram_init();
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size(
(void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
}
#endif
#endif
static int am33xx_dm_post_init(void *ctx, struct event *event)
{
hw_data_init();
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
early_system_init();
#endif
return 0;
}
EVENT_SPY(EVT_DM_POST_INIT, am33xx_dm_post_init);
Reference in a new issue View git blame Copy permalink