mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 22:52:18 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
101 lines
2.6 KiB
C
101 lines
2.6 KiB
C
/*
|
|
* Copyright (C) 2005-2006 Atmel Corporation
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/sdram.h>
|
|
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/hardware.h>
|
|
|
|
#include "hsdramc1.h"
|
|
|
|
unsigned long sdram_init(void *sdram_base, const struct sdram_config *config)
|
|
{
|
|
unsigned long sdram_size;
|
|
uint32_t cfgreg;
|
|
unsigned int i;
|
|
|
|
cfgreg = (HSDRAMC1_BF(NC, config->col_bits - 8)
|
|
| HSDRAMC1_BF(NR, config->row_bits - 11)
|
|
| HSDRAMC1_BF(NB, config->bank_bits - 1)
|
|
| HSDRAMC1_BF(CAS, config->cas)
|
|
| HSDRAMC1_BF(TWR, config->twr)
|
|
| HSDRAMC1_BF(TRC, config->trc)
|
|
| HSDRAMC1_BF(TRP, config->trp)
|
|
| HSDRAMC1_BF(TRCD, config->trcd)
|
|
| HSDRAMC1_BF(TRAS, config->tras)
|
|
| HSDRAMC1_BF(TXSR, config->txsr));
|
|
|
|
if (config->data_bits == SDRAM_DATA_16BIT)
|
|
cfgreg |= HSDRAMC1_BIT(DBW);
|
|
|
|
hsdramc1_writel(CR, cfgreg);
|
|
|
|
/* Send a NOP to turn on the clock (necessary on some chips) */
|
|
hsdramc1_writel(MR, HSDRAMC1_MODE_NOP);
|
|
hsdramc1_readl(MR);
|
|
writel(0, sdram_base);
|
|
|
|
/*
|
|
* Initialization sequence for SDRAM, from the data sheet:
|
|
*
|
|
* 1. A minimum pause of 200 us is provided to precede any
|
|
* signal toggle.
|
|
*/
|
|
udelay(200);
|
|
|
|
/*
|
|
* 2. A Precharge All command is issued to the SDRAM
|
|
*/
|
|
hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
|
|
hsdramc1_readl(MR);
|
|
writel(0, sdram_base);
|
|
|
|
/*
|
|
* 3. Eight auto-refresh (CBR) cycles are provided
|
|
*/
|
|
hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH);
|
|
hsdramc1_readl(MR);
|
|
for (i = 0; i < 8; i++)
|
|
writel(0, sdram_base);
|
|
|
|
/*
|
|
* 4. A mode register set (MRS) cycle is issued to program
|
|
* SDRAM parameters, in particular CAS latency and burst
|
|
* length.
|
|
*
|
|
* The address will be chosen by the SDRAMC automatically; we
|
|
* just have to make sure BA[1:0] are set to 0.
|
|
*/
|
|
hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE);
|
|
hsdramc1_readl(MR);
|
|
writel(0, sdram_base);
|
|
|
|
/*
|
|
* 5. The application must go into Normal Mode, setting Mode
|
|
* to 0 in the Mode Register and performing a write access
|
|
* at any location in the SDRAM.
|
|
*/
|
|
hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL);
|
|
hsdramc1_readl(MR);
|
|
writel(0, sdram_base);
|
|
|
|
/*
|
|
* 6. Write refresh rate into SDRAMC refresh timer count
|
|
* register (refresh rate = timing between refresh cycles).
|
|
*/
|
|
hsdramc1_writel(TR, config->refresh_period);
|
|
|
|
if (config->data_bits == SDRAM_DATA_16BIT)
|
|
sdram_size = 1 << (config->row_bits + config->col_bits
|
|
+ config->bank_bits + 1);
|
|
else
|
|
sdram_size = 1 << (config->row_bits + config->col_bits
|
|
+ config->bank_bits + 2);
|
|
|
|
return sdram_size;
|
|
}
|