u-boot/drivers/mtd/spi/spi_flash.c
Thomas Chou 12c2e3bbbe spi_flash: support old STMicro parts with RES
Some old STMicro parts do not support JEDEC ID (0x9f). This patch
uses RES (0xab) to get Electronic ID and translates it to JEDEC ID.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-06-30 23:47:08 -04:00

184 lines
3.8 KiB
C

/*
* SPI flash interface
*
* Copyright (C) 2008 Atmel Corporation
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <malloc.h>
#include <spi.h>
#include <spi_flash.h>
#include "spi_flash_internal.h"
int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
{
unsigned long flags = SPI_XFER_BEGIN;
int ret;
if (len == 0)
flags |= SPI_XFER_END;
ret = spi_xfer(spi, 8, &cmd, NULL, flags);
if (ret) {
debug("SF: Failed to send command %02x: %d\n", cmd, ret);
return ret;
}
if (len) {
ret = spi_xfer(spi, len * 8, NULL, response, SPI_XFER_END);
if (ret)
debug("SF: Failed to read response (%zu bytes): %d\n",
len, ret);
}
return ret;
}
int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len)
{
unsigned long flags = SPI_XFER_BEGIN;
int ret;
if (data_len == 0)
flags |= SPI_XFER_END;
ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
if (ret) {
debug("SF: Failed to send read command (%zu bytes): %d\n",
cmd_len, ret);
} else if (data_len != 0) {
ret = spi_xfer(spi, data_len * 8, NULL, data, SPI_XFER_END);
if (ret)
debug("SF: Failed to read %zu bytes of data: %d\n",
data_len, ret);
}
return ret;
}
int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
const void *data, size_t data_len)
{
unsigned long flags = SPI_XFER_BEGIN;
int ret;
if (data_len == 0)
flags |= SPI_XFER_END;
ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
if (ret) {
debug("SF: Failed to send read command (%zu bytes): %d\n",
cmd_len, ret);
} else if (data_len != 0) {
ret = spi_xfer(spi, data_len * 8, data, NULL, SPI_XFER_END);
if (ret)
debug("SF: Failed to read %zu bytes of data: %d\n",
data_len, ret);
}
return ret;
}
int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len)
{
struct spi_slave *spi = flash->spi;
int ret;
spi_claim_bus(spi);
ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
spi_release_bus(spi);
return ret;
}
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode)
{
struct spi_slave *spi;
struct spi_flash *flash;
int ret;
u8 idcode[5];
spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
if (!spi) {
debug("SF: Failed to set up slave\n");
return NULL;
}
ret = spi_claim_bus(spi);
if (ret) {
debug("SF: Failed to claim SPI bus: %d\n", ret);
goto err_claim_bus;
}
/* Read the ID codes */
ret = spi_flash_cmd(spi, CMD_READ_ID, &idcode, sizeof(idcode));
if (ret)
goto err_read_id;
debug("SF: Got idcode %02x %02x %02x %02x %02x\n", idcode[0],
idcode[1], idcode[2], idcode[3], idcode[4]);
switch (idcode[0]) {
#ifdef CONFIG_SPI_FLASH_SPANSION
case 0x01:
flash = spi_flash_probe_spansion(spi, idcode);
break;
#endif
#ifdef CONFIG_SPI_FLASH_ATMEL
case 0x1F:
flash = spi_flash_probe_atmel(spi, idcode);
break;
#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX
case 0xc2:
flash = spi_flash_probe_macronix(spi, idcode);
break;
#endif
#ifdef CONFIG_SPI_FLASH_WINBOND
case 0xef:
flash = spi_flash_probe_winbond(spi, idcode);
break;
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO
case 0x20:
case 0xff: /* Let the stmicro func handle non-JEDEC ids */
flash = spi_flash_probe_stmicro(spi, idcode);
break;
#endif
#ifdef CONFIG_SPI_FLASH_SST
case 0xBF:
flash = spi_flash_probe_sst(spi, idcode);
break;
#endif
default:
debug("SF: Unsupported manufacturer %02X\n", idcode[0]);
flash = NULL;
break;
}
if (!flash)
goto err_manufacturer_probe;
spi_release_bus(spi);
return flash;
err_manufacturer_probe:
err_read_id:
spi_release_bus(spi);
err_claim_bus:
spi_free_slave(spi);
return NULL;
}
void spi_flash_free(struct spi_flash *flash)
{
spi_free_slave(flash->spi);
free(flash);
}