mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 16:07:30 +00:00
509adc8b77
In the current u-boot code, the value of these fields are the reserved value (0b100), through the signal integrity measurement on freescale's board with these reserved setting, the signal eye is out of the recommended spec for non-transition amplitude at 500mV nominal. According to the errata for MPC8379E, we should make a change to the recommended setting from essentially nothing at this time to 0b001 for SATA. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
||
|---|---|---|
| .. | ||
| config.mk | ||
| cpu.c | ||
| cpu_init.c | ||
| ecc.c | ||
| fdt.c | ||
| interrupts.c | ||
| law.c | ||
| Makefile | ||
| nand_init.c | ||
| pci.c | ||
| pcie.c | ||
| qe_io.c | ||
| serdes.c | ||
| spd_sdram.c | ||
| speed.c | ||
| start.S | ||
| traps.c | ||
| u-boot.lds | ||