Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-29 16:10:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm
History
Shaohui Xie 126fe70d77 armv8: ls1046aqds: Add LS1046AQDS board support 
LS1046AQDS Specification:
-------------------------
Memory subsystem:
 * 8GByte DDR4 SDRAM (64bit bus)
 * 128 Mbyte NOR flash single-chip memory
 * 512 Mbyte NAND flash
 * 64 Mbyte high-speed SPI flash
 * SD connector to interface with the SD memory card

Ethernet:
 * Two XFI 10G ports
 * Two SGMII ports
 * Two RGMII ports

PCIe: supports Gen 1 and Gen 2

SATA 3.0: one SATA 3.0 port

USB 3.0: two micro AB connector and one type A connector

UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:11:10 -07:00
..
cpu armv8: ls1046a: disable SATA ECC in DCSR 2016-09-14 14:10:52 -07:00
dts armv8: ls1046aqds: Add LS1046AQDS board support 2016-09-14 14:11:10 -07:00
imx-common mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULT 2016-07-28 12:08:22 +02:00
include armv8: ls1046a: Enable DDR erratum for ls1046a 2016-09-14 14:10:44 -07:00
lib arm: cache: always flush cache line size for page table 2016-08-26 17:04:56 -04:00
mach-at91 gpio: atmel_pio4: Move PIO4 definitions to head file 2016-08-15 22:58:03 +02:00
mach-bcm283x bcm2835_gpio: Implement GPIOF_FUNC 2016-09-06 13:18:18 -04:00
mach-davinci common: Pass the boot device into spl_boot_mode() 2016-06-26 20:17:22 +02:00
mach-exynos ARM: Rework and correct barrier definitions 2016-08-05 07:23:57 -04:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-integrator integrator: switch to DM serial port 2015-08-12 20:47:49 -04:00
mach-keystone keystone: k2h/e/l: Fix DMA coherency for QM PDSP 2016-07-25 12:00:05 -04:00
mach-kirkwood ARM: Move SYS_CACHELINE_SIZE over to Kconfig 2016-08-26 17:04:46 -04:00
mach-meson armv8: mmu: Add support of non-identical mapping 2016-07-15 09:01:43 -07:00
mach-mvebu ARM: Move SYS_CACHELINE_SIZE over to Kconfig 2016-08-26 17:04:46 -04:00
mach-orion5x Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
mach-rmobile ARM: rmobile: r8a7795: Add MMU layout 2016-08-17 10:25:36 +09:00
mach-rockchip drivers/sysreset: group sysreset drivers 2016-08-12 09:22:17 -04:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-snapdragon drivers/sysreset: group sysreset drivers 2016-08-12 09:22:17 -04:00
mach-socfpga common: Pass the boot device into spl_boot_mode() 2016-06-26 20:17:22 +02:00
mach-stm32 Revert "stm32: Change USART port to USART6 for stm32f746 discovery board" 2016-07-21 15:38:13 -04:00
mach-sunxi sunxi: Tune H3 DRAM PLL to improve lock time 2016-08-26 16:58:37 +02:00
mach-tegra ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig 2016-09-07 08:48:51 -04:00
mach-uniphier ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig 2016-09-07 08:48:51 -04:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq zynq: Increase the early malloc() size 2016-07-27 14:15:54 -06:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk ARM: Add secure section for initialized data 2016-07-15 15:54:58 +02:00
Kconfig armv8: ls1046aqds: Add LS1046AQDS board support 2016-09-14 14:11:10 -07:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2016-08-20 16:40:34 -04:00