u-boot/arch/arm/dts/zynqmp-ep108.dts
Michal Simek cb9dcc6eaa ARM64: zynqmp: Fix coding style in phy node
Trivial fix.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:56 +01:00

174 lines
2.6 KiB
Text

/*
* dts file for Xilinx ZynqMP ep108 development board
*
* (C) Copyright 2014 - 2015, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
/include/ "zynqmp.dtsi"
/include/ "zynqmp-ep108-clk.dtsi"
/ {
model = "ZynqMP EP108";
aliases {
serial0 = &uart0;
spi0 = &qspi;
spi1 = &spi0;
spi2 = &spi1;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x0 0x0 0x40000000>;
};
};
&can0 {
status = "okay";
};
&gem0 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
phy0: phy@0 {
reg = <0>;
max-speed = <100>;
};
};
&gpio {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
eeprom@54 {
compatible = "at,24c64";
reg = <0x54>;
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
eeprom@55 {
compatible = "at,24c64";
reg = <0x55>;
};
};
&qspi {
status = "okay";
flash@0 {
compatible = "n25q512a11";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <10000000>;
partition@qspi-fsbl-uboot { /* for testing purpose */
label = "qspi-fsbl-uboot";
reg = <0x0 0x100000>;
};
partition@qspi-linux { /* for testing purpose */
label = "qspi-linux";
reg = <0x100000 0x500000>;
};
partition@qspi-device-tree { /* for testing purpose */
label = "qspi-device-tree";
reg = <0x600000 0x20000>;
};
partition@qspi-rootfs { /* for testing purpose */
label = "qspi-rootfs";
reg = <0x620000 0x5E0000>;
};
};
};
&sata {
status = "okay";
ceva,broken-gen2;
};
&sdhci0 {
status = "okay";
};
&sdhci1 {
status = "okay";
};
&spi0 {
status = "okay";
num-cs = <1>;
spi0_flash0: spi0_flash0@0 {
compatible = "m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
spi0_flash0@00000000 {
label = "spi0_flash0";
reg = <0x0 0x100000>;
};
};
};
&spi1 {
status = "okay";
num-cs = <1>;
spi1_flash0: spi1_flash0@0 {
compatible = "m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
spi1_flash0@00000000 {
label = "spi1_flash0";
reg = <0x0 0x100000>;
};
};
};
&uart0 {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "peripheral";
maximum-speed = "high-speed";
};
&usb1 {
status = "okay";
dr_mode = "host";
maximum-speed = "high-speed";
};
&watchdog0 {
status = "okay";
};
&xlnx_dp {
xlnx,max-pclock-frequency = <200000>;
};
&xlnx_dpdma {
xlnx,axi-clock-freq = <200000000>;
};