mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
181bd9dc61
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
138 lines
3.7 KiB
C
138 lines
3.7 KiB
C
/*
|
|
* Copyright (C) 2013 Samsung Electronics
|
|
* Hyungwon Hwang <human.hwang@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_ODROID_XU3_H
|
|
#define __CONFIG_ODROID_XU3_H
|
|
|
|
#include "exynos5420-common.h"
|
|
#include <configs/exynos5-common.h>
|
|
|
|
#undef CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_IDENT_STRING " for ODROID-XU3"
|
|
|
|
#define CONFIG_BOARD_COMMON
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
|
#define CONFIG_SYS_TEXT_BASE 0x43E00000
|
|
|
|
/* select serial console configuration */
|
|
#define CONFIG_SERIAL2 /* use SERIAL 2 */
|
|
|
|
#define TZPC_BASE_OFFSET 0x10000
|
|
|
|
#define CONFIG_CMD_MMC
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 8
|
|
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
|
|
/* Reserve the last 22 MiB for the secure firmware */
|
|
#define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL)
|
|
#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE
|
|
|
|
#define CONFIG_ENV_IS_IN_MMC
|
|
|
|
#undef CONFIG_ENV_SIZE
|
|
#undef CONFIG_ENV_OFFSET
|
|
#define CONFIG_ENV_SIZE (SZ_1K * 16)
|
|
#define CONFIG_ENV_OFFSET (SZ_1K * 3136) /* ~3 MiB offset */
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
|
|
|
|
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_EHCI
|
|
#define CONFIG_USB_EHCI_EXYNOS
|
|
|
|
/* DWC3 */
|
|
#define CONFIG_USB_DWC3
|
|
#define CONFIG_USB_DWC3_GADGET
|
|
#define CONFIG_USB_DWC3_PHY_SAMSUNG
|
|
|
|
/* USB gadget */
|
|
#define CONFIG_USB_GADGET
|
|
#define CONFIG_USB_GADGET_DUALSPEED
|
|
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
|
|
|
/* Downloader */
|
|
#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
|
|
#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
|
|
#define CONFIG_G_DNL_MANUFACTURER "Samsung"
|
|
#define CONFIG_USB_GADGET_DOWNLOAD
|
|
|
|
/* DFU */
|
|
#define CONFIG_USB_FUNCTION_DFU
|
|
#define CONFIG_DFU_MMC
|
|
#define CONFIG_CMD_DFU
|
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
|
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
|
|
/* THOR */
|
|
#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
|
|
#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
|
|
#define CONFIG_USB_FUNCTION_THOR
|
|
#define CONFIG_CMD_THOR_DOWNLOAD
|
|
|
|
/* UMS */
|
|
#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
|
|
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
|
|
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
|
#define CONFIG_CMD_USB_MASS_STORAGE
|
|
|
|
/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */
|
|
#undef CONFIG_EXYNOS_TMU
|
|
#undef CONFIG_TMU_CMD_DTT
|
|
|
|
#define CONFIG_DFU_ALT_SYSTEM \
|
|
"uImage fat 0 1;" \
|
|
"zImage fat 0 1;" \
|
|
"Image.itb fat 0 1;" \
|
|
"uInitrd fat 0 1;" \
|
|
"boot.scr fat 0 1;" \
|
|
"boot.cmd fat 0 1;" \
|
|
"exynos5422-odroidxu3.dtb fat 0 1;" \
|
|
"boot part 0 1;" \
|
|
"root part 0 2\0"
|
|
|
|
#define CONFIG_DFU_ALT_BOOT_EMMC \
|
|
"u-boot raw 0x3e 0x800 mmcpart 1;" \
|
|
"bl1 raw 0x0 0x1e mmcpart 1;" \
|
|
"bl2 raw 0x1e 0x1d mmcpart 1;" \
|
|
"tzsw raw 0x83e 0x200 mmcpart 1;" \
|
|
"params.bin raw 0x1880 0x20\0"
|
|
|
|
#define CONFIG_DFU_ALT_BOOT_SD \
|
|
"u-boot raw 0x3f 0x800;" \
|
|
"bl1 raw 0x1 0x1e;" \
|
|
"bl2 raw 0x1f 0x1d;" \
|
|
"tzsw raw 0x83f 0x200;" \
|
|
"params.bin raw 0x1880 0x20\0"
|
|
|
|
/* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
|
|
#define CONFIG_MISC_COMMON
|
|
#define CONFIG_SET_DFU_ALT_INFO
|
|
#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
|
|
|
|
/* Define new extra env settings, including DFU settings */
|
|
#undef CONFIG_EXTRA_ENV_SETTINGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
EXYNOS_DEVICE_SETTINGS \
|
|
EXYNOS_FDTFILE_SETTING \
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
|
BOOTENV \
|
|
"bootdelay=0\0" \
|
|
"rootfstype=ext4\0" \
|
|
"console=" CONFIG_DEFAULT_CONSOLE \
|
|
"fdtfile=exynos5422-odroidxu3.dtb\0" \
|
|
"boardname=odroidxu3\0" \
|
|
"mmcbootdev=0\0" \
|
|
"mmcrootdev=0\0" \
|
|
"mmcbootpart=1\0" \
|
|
"mmcrootpart=2\0" \
|
|
"dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \
|
|
"dfu_alt_info=Autoset by THOR/DFU command run.\0"
|
|
|
|
#endif /* __CONFIG_H */
|