u-boot/arch/arm/cpu/armv7/mx5/soc.c
Troy Kisky 124a06d7fb imx-common/cmd_bmode.c: add imx bmode (bootmode) command
This is useful for forcing the ROM's
usb downloader to activate upon a watchdog reset.
Or, you can boot from either SD Card.

Currently, support added for MX53 and MX6Q
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Note: MX53 support untested.
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:26 +02:00

156 lines
3.9 KiB
C

/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/imx-common/boot_mode.h>
#if !(defined(CONFIG_MX51) || defined(CONFIG_MX53))
#error "CPU_TYPE not defined"
#endif
u32 get_cpu_rev(void)
{
#ifdef CONFIG_MX51
int system_rev = 0x51000;
#else
int system_rev = 0x53000;
#endif
int reg = __raw_readl(ROM_SI_REV);
#if defined(CONFIG_MX51)
switch (reg) {
case 0x02:
system_rev |= CHIP_REV_1_1;
break;
case 0x10:
if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0)
system_rev |= CHIP_REV_2_5;
else
system_rev |= CHIP_REV_2_0;
break;
case 0x20:
system_rev |= CHIP_REV_3_0;
break;
default:
system_rev |= CHIP_REV_1_0;
break;
}
#else
if (reg < 0x20)
system_rev |= CHIP_REV_1_0;
else
system_rev |= reg;
#endif
return system_rev;
}
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif
#if defined(CONFIG_FEC_MXC)
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
int i;
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
struct fuse_bank *bank = &iim->bank[1];
struct fuse_bank1_regs *fuse =
(struct fuse_bank1_regs *)bank->fuse_regs;
for (i = 0; i < 6; i++)
mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
}
#endif
void set_chipselect_size(int const cs_size)
{
unsigned int reg;
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
reg = readl(&iomuxc_regs->gpr1);
switch (cs_size) {
case CS0_128:
reg &= ~0x7; /* CS0=128MB, CS1=0, CS2=0, CS3=0 */
reg |= 0x5;
break;
case CS0_64M_CS1_64M:
reg &= ~0x3F; /* CS0=64MB, CS1=64MB, CS2=0, CS3=0 */
reg |= 0x1B;
break;
case CS0_64M_CS1_32M_CS2_32M:
reg &= ~0x1FF; /* CS0=64MB, CS1=32MB, CS2=32MB, CS3=0 */
reg |= 0x4B;
break;
case CS0_32M_CS1_32M_CS2_32M_CS3_32M:
reg &= ~0xFFF; /* CS0=32MB, CS1=32MB, CS2=32MB, CS3=32MB */
reg |= 0x249;
break;
default:
printf("Unknown chip select size: %d\n", cs_size);
break;
}
writel(reg, &iomuxc_regs->gpr1);
}
#ifdef CONFIG_MX53
void boot_mode_apply(unsigned cfg_val)
{
writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr);
}
/*
* cfg_val will be used for
* Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
*
* If bit 28 of LPGR is set upon watchdog reset,
* bits[25:0] of LPGR will move to SBMR.
*/
const struct boot_mode soc_boot_modes[] = {
{"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
/* usb or serial download */
{"usb", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)},
{"sata", MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)},
{"escpi1:0", MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)},
{"escpi1:1", MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)},
{"escpi1:2", MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)},
{"escpi1:3", MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)},
/* 4 bit bus width */
{"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
{"esdhc2", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
{"esdhc3", MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)},
{"esdhc4", MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)},
{NULL, 0},
};
#endif