mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 03:53:31 +00:00
674c58c7b7
The term eMMC is used inconsistently within the FSP devicetree bindings (e-mmc and emmc), especially for "emmc-host-max-speed" documentation and code disagree. Change all eMMC instances within the FSP bindings to consistently use "emmc". The term "emmc" is already used a lot within U-Boot, while "e-mmc" is only used in the FSP bindings. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct one typo in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
327 lines
9.6 KiB
Text
327 lines
9.6 KiB
Text
* Intel FSP-M configuration
|
|
|
|
Several Intel platforms require the execution of the Intel FSP (Firmware
|
|
Support Package) for initialization. The FSP consists of multiple parts, one
|
|
of which is the FSP-M (Memory initialization phase).
|
|
|
|
This binding applies to the FSP-M for the Intel Apollo Lake SoC.
|
|
|
|
The FSP-M is available on Github [1].
|
|
For detailed information on the FSP-M parameters see the documentation in
|
|
FSP/ApolloLakeFspBinPkg/Docs [2].
|
|
|
|
The properties of this binding are all optional. If no properties are set the
|
|
values of the FSP-M are used.
|
|
|
|
[1] https://github.com/IntelFsp/FSP
|
|
[2] https://github.com/IntelFsp/FSP/tree/master/ApolloLakeFspBinPkg/Docs
|
|
|
|
Optional properties:
|
|
- fspm,training-delay: Time taken to train DDR memory if there is no cached MRC
|
|
data, in seconds. This is used to show a message if possible. For Chromebook
|
|
Coral this is typically 21 seconds. For an APL board with 1GB of RAM, it may
|
|
be only 6 seconds.
|
|
- fspm,serial-debug-port-address: Debug Serial Port Base address
|
|
- fspm,serial-debug-port-type: Debug Serial Port Type
|
|
0: NONE
|
|
1: I/O
|
|
2: MMIO (default)
|
|
- fspm,serial-debug-port-device: Serial Port Debug Device
|
|
0: SOC UART0
|
|
1: SOC UART1
|
|
2: SOC UART2 (default)
|
|
3: External Device
|
|
- fspm,serial-debug-port-stride-size: Debug Serial Port Stride Size
|
|
0: 1
|
|
2: 4 (default)
|
|
- fspm,mrc-fast-boot: Memory Fast Boot
|
|
- fspm,igd: Integrated Graphics Device
|
|
- fspm,igd-dvmt50-pre-alloc: DVMT Pre-Allocated
|
|
0x02: 64 MB (default)
|
|
0x03: 96 MB
|
|
0x04: 128 MB
|
|
0x05: 160 MB
|
|
0x06: 192 MB
|
|
0x07: 224 MB
|
|
0x08: 256 MB
|
|
0x09: 288 MB
|
|
0x0A: 320 MB
|
|
0x0B: 352 MB
|
|
0x0C: 384 MB
|
|
0x0D: 416 MB
|
|
0x0E: 448 MB
|
|
0x0F: 480 MB
|
|
0x10: 512 MB
|
|
- fspm,aperture-size: Aperture Size
|
|
0x1: 128 MB (default)
|
|
0x2: 256 MB
|
|
0x3: 512 MB
|
|
- fspm,gtt-size: GTT Size
|
|
0x1: 2 MB
|
|
0x2: 4 MB
|
|
0x3: 8 MB (default)
|
|
- fspm,primary-video-adaptor: Primary Display
|
|
0x0: AUTO (default)
|
|
0x2: IGD
|
|
0x3: PCI
|
|
- fspm,package: Package
|
|
0x0: SODIMM (default)
|
|
0x1: BGA
|
|
0x2: BGA mirrored (LPDDR3 only)
|
|
0x3: SODIMM/UDIMM with Rank 1 Mirrored (DDR3L)
|
|
- fspm,profile: Profile
|
|
0x01: WIO2_800_7_8_8
|
|
0x02: WIO2_1066_9_10_10
|
|
0x03: LPDDR3_1066_8_10_10
|
|
0x04: LPDDR3_1333_10_12_12
|
|
0x05: LPDDR3_1600_12_15_15
|
|
0x06: LPDDR3_1866_14_17_17
|
|
0x07: LPDDR3_2133_16_20_20
|
|
0x08: LPDDR4_1066_10_10_10
|
|
0x09: LPDDR4_1600_14_15_15
|
|
0x0A: LPDDR4_2133_20_20_20
|
|
0x0B: LPDDR4_2400_24_22_22
|
|
0x0C: LPDDR4_2666_24_24_24
|
|
0x0D: LPDDR4_2933_28_27_27
|
|
0x0E: LPDDR4_3200_28_29_29
|
|
0x0F: DDR3_1066_6_6_6
|
|
0x10: DDR3_1066_7_7_7
|
|
0x11: DDR3_1066_8_8_8
|
|
0x12: DDR3_1333_7_7_7
|
|
0x13: DDR3_1333_8_8_8
|
|
0x14: DDR3_1333_9_9_9
|
|
0x15: DDR3_1333_10_10_10
|
|
0x16: DDR3_1600_8_8_8
|
|
0x17: DDR3_1600_9_9_9
|
|
0x18: DDR3_1600_10_10_10
|
|
0x19: DDR3_1600_11_11_11 (default)
|
|
0x1A: DDR3_1866_10_10_10
|
|
0x1B: DDR3_1866_11_11_11
|
|
0x1C: DDR3_1866_12_12_12
|
|
0x1D: DDR3_1866_13_13_13
|
|
0x1E: DDR3_2133_11_11_11
|
|
0x1F: DDR3_2133_12_12_12
|
|
0x20: DDR3_2133_13_13_13
|
|
0x21: DDR3_2133_14_14_14
|
|
0x22: DDR4_1333_10_10_10
|
|
0x23: DDR4_1600_10_10_10
|
|
0x24: DDR4_1600_11_11_11
|
|
0x25: DDR4_1600_12_12_12
|
|
0x26: DDR4_1866_12_12_12
|
|
0x27: DDR4_1866_13_13_13
|
|
0x28: DDR4_1866_14_14_14
|
|
0x29: DDR4_2133_14_14_14
|
|
0x2A: DDR4_2133_15_15_15
|
|
0x2B: DDR4_2133_16_16_16
|
|
0x2C: DDR4_2400_15_15_15
|
|
0x2D: DDR4_2400_16_16_16
|
|
0x2E: DDR4_2400_17_17_17
|
|
0x2F: DDR4_2400_18_18_18
|
|
- fspm,memory-down: Memory Down
|
|
0x0: No (default)
|
|
0x1: Yes
|
|
0x2: 1MD+SODIMM (for DDR3L only) ACRD
|
|
0x3: 1x32 LPDDR4
|
|
- fspm,ddr3l-page-size: DDR3LPageSize
|
|
0x1: 1KB (default)
|
|
0x2: 2KB
|
|
- fspm,ddr3-lasr: DDR3LASR
|
|
- fspm,scrambler-support: ScramblerSupport
|
|
- fspm,interleaved-mode: InterleavedMode
|
|
- fspm,channel-hash-mask: ChannelHashMask
|
|
- fspm,fspm,slice-hash-mask: SliceHashMask
|
|
- fspm,channels-slices-enable: ChannelsSlices
|
|
- fspm,min-ref-rate2x-enable: MinRefRate2x
|
|
- fspm,dual-rank-support-enable: DualRankSupport
|
|
- fspm,rmt-mode: RmtMode
|
|
- fspm,memory-size-limit: MemorySizeLimit
|
|
- fspm,low-memory-max-value: LowMemoryMaxValue
|
|
- fspm,high-memory-max-value: HighMemoryMaxValue
|
|
- fspm,disable-fast-boot: FastBoot
|
|
- fspm,dimm0-spd-address: DIMM0 SPD Address
|
|
- fspm,dimm1-spd-address: DIMM1 SPD Address
|
|
- fspm,chX-rank-enable: Must be set to enable rank (X = 0-3)
|
|
- fspm,chX-device-width: DRAM device width per DRAM channel (X = 0-3)
|
|
0: x8
|
|
1: x16
|
|
2: x32
|
|
3: x64
|
|
- fspm,chX-dram-density: Must specify the DRAM device density (X = 0-3)
|
|
0: 4Gb
|
|
1: 6Gb
|
|
2: 8Gb
|
|
3: 12Gb
|
|
4: 16Gb
|
|
5: 2Gb
|
|
- fspm,chX-option: Channel options (X = 0-3)
|
|
- fspm,chX-odt-config: Channel Odt Config (X = 0-3)
|
|
- fspm,chX-mode2-n: Force 2N Mode (X = 0-3)
|
|
0x0: Auto
|
|
0x1: Force 2N CMD Timing Mode
|
|
- fspm,chX-odt-levels: Channel Odt Levels (X = 0-3)
|
|
0: ODT Connected to SoC
|
|
1: ODT held high
|
|
- fspm,rmt-check-run: RmtCheckRun
|
|
- fspm,rmt-margin-check-scale-high-threshold: RmtMarginCheckScaleHighThreshold
|
|
- fspm,ch-bit-swizzling: Bit_swizzling
|
|
- fspm,msg-level-mask: MsgLevelMask
|
|
- fspm,pre-mem-gpio-table-pin-num: PreMem GPIO Pin Number for each table
|
|
- fspm,pre-mem-gpio-table-ptr: PreMem GPIO Table Pointer
|
|
- fspm,pre-mem-gpio-table-entry-num: PreMem GPIO Table Entry Number
|
|
- fspm,enhance-port8xh-decoding: Enhance the port 8xh decoding
|
|
- fspm,spd-write-enable: SPD Data Write
|
|
- fspm,mrc-data-saving: MRC Training Data Saving
|
|
- fspm,oem-loading-base: OEM File Loading Address
|
|
- fspm,oem-file-name: OEM File Name to Load
|
|
- fspm,mrc-boot-data-ptr:
|
|
- fspm,emmc-trace-len: eMMC Trace Length
|
|
0x0: Long
|
|
0x1: Short
|
|
- fspm,skip-cse-rbp: Skip CSE RBP to support zero sized IBB
|
|
- fspm,npk-en: Npk Enable
|
|
0: Disable
|
|
1: Enable
|
|
2: Debugger
|
|
3: Auto (default)
|
|
- fspm,fw-trace-en: FW Trace Enable
|
|
- fspm,fw-trace-destination: FW Trace Destination
|
|
1: NPK_TRACE_TO_MEMORY
|
|
2: NPK_TRACE_TO_DCI
|
|
3: NPK_TRACE_TO_BSSB
|
|
4: NPK_TRACE_TO_PTI (default)
|
|
- fspm,recover-dump: NPK Recovery Dump
|
|
- fspm,msc0-wrap: Memory Region 0 Buffer WrapAround
|
|
0: n0-warp
|
|
1: n1-warp (default)
|
|
- fspm,msc1-wrap: Memory Region 1 Buffer WrapAround
|
|
0: n0-warp
|
|
1: n1-warp (default)
|
|
- fspm,msc0-size: Memory Region 0 Buffer Size
|
|
0: 0MB (default)
|
|
1: 1MB
|
|
2: 8MB
|
|
3: 64MB
|
|
4: 128MB
|
|
5: 256MB
|
|
6: 512MB
|
|
7: 1GB
|
|
- fspm,msc1-size: Memory Region 1 Buffer Size
|
|
0: 0MB (default)
|
|
1: 1MB
|
|
2: 8MB
|
|
3: 64MB
|
|
4: 128MB
|
|
5: 256MB
|
|
6: 512MB
|
|
7: 1GB
|
|
- fspm,pti-mode: PTI Mode
|
|
0: 0ff
|
|
1: x4 (default)
|
|
2: x8
|
|
3: x12
|
|
4: x16
|
|
- fspm,pti-training: PTI Training
|
|
0: off (default)
|
|
1-6: 1-6
|
|
- fspm,pti-speed:
|
|
0: full
|
|
1: half
|
|
2: quarter (default)
|
|
- fspm,punit-mlvl: Punit Message Level
|
|
0:
|
|
1: (default)
|
|
2-4: 2-4
|
|
- fspm,pmc-mlvl: PMC Message Level
|
|
0:
|
|
1: (default)
|
|
2-4: 2-4
|
|
- fspm,sw-trace-en: SW Trace Enable
|
|
- fspm,periodic-retraining-disable: Periodic Retraining Disable
|
|
- fspm,enable-reset-system: Enable Reset System
|
|
- fspm,enable-s3-heci2: Enable HECI2 in S3 resume path
|
|
- fspm,variable-nvs-buffer-ptr:
|
|
- fspm,start-timer-ticker-of-pfet-assert: PCIE SLOT Power Enable Assert Time - PFET
|
|
- fspm,rt-en: Real Time Enabling
|
|
- fspm,skip-pcie-power-sequence: Skip Pcie Power Sequence
|
|
|
|
Example:
|
|
|
|
&host_bridge {
|
|
fspm,package = <PACKAGE_BGA>;
|
|
fspm,profile = <PROFILE_LPDDR4_2400_24_22_22>;
|
|
fspm,memory-down = <MEMORY_DOWN_YES>;
|
|
fspm,scrambler-support = <1>;
|
|
fspm,interleaved-mode = <INTERLEAVED_MODE_ENABLE>;
|
|
fspm,channel-hash-mask = <0x36>;
|
|
fspm,slice-hash-mask = <0x9>;
|
|
fspm,low-memory-max-value = <2048>;
|
|
fspm,ch0-rank-enable = <1>;
|
|
fspm,ch0-device-width = <CHX_DEVICE_WIDTH_X16>;
|
|
fspm,ch0-dram-density = <CHX_DEVICE_DENSITY_8GB>;
|
|
fspm,ch0-option = <(CHX_OPTION_RANK_INTERLEAVING |
|
|
CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
|
|
fspm,ch0-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
|
|
fspm,ch1-rank-enable = <1>;
|
|
fspm,ch1-device-width = <CHX_DEVICE_WIDTH_X16>;
|
|
fspm,ch1-dram-density = <CHX_DEVICE_DENSITY_8GB>;
|
|
fspm,ch1-option = <(CHX_OPTION_RANK_INTERLEAVING |
|
|
CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
|
|
fspm,ch1-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
|
|
fspm,ch2-rank-enable = <1>;
|
|
fspm,ch2-device-width = <CHX_DEVICE_WIDTH_X16>;
|
|
fspm,ch2-dram-density = <CHX_DEVICE_DENSITY_8GB>;
|
|
fspm,ch2-option = <(CHX_OPTION_RANK_INTERLEAVING |
|
|
CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
|
|
fspm,ch2-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
|
|
fspm,ch3-rank-enable = <1>;
|
|
fspm,ch3-device-width = <CHX_DEVICE_WIDTH_X16>;
|
|
fspm,ch3-dram-density = <CHX_DEVICE_DENSITY_8GB>;
|
|
fspm,ch3-option = <(CHX_OPTION_RANK_INTERLEAVING |
|
|
CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
|
|
fspm,ch3-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
|
|
fspm,fspm,skip-cse-rbp = <1>;
|
|
|
|
fspm,ch-bit-swizzling = /bits/ 8 <
|
|
/* LP4_PHYS_CH0A */
|
|
|
|
/* DQA[0:7] pins of LPDDR4 module */
|
|
6 7 5 4 3 1 0 2
|
|
/* DQA[8:15] pins of LPDDR4 module */
|
|
12 10 11 13 14 8 9 15
|
|
/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
|
|
16 22 23 20 18 17 19 21
|
|
/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
|
|
30 28 29 25 24 26 27 31
|
|
|
|
/* LP4_PHYS_CH0B */
|
|
/* DQA[0:7] pins of LPDDR4 module */
|
|
7 3 5 2 6 0 1 4
|
|
/* DQA[8:15] pins of LPDDR4 module */
|
|
9 14 12 13 10 11 8 15
|
|
/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
|
|
20 22 23 16 19 17 18 21
|
|
/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
|
|
28 24 26 27 29 30 31 25
|
|
|
|
/* LP4_PHYS_CH1A */
|
|
|
|
/* DQA[0:7] pins of LPDDR4 module */
|
|
2 1 6 7 5 4 3 0
|
|
/* DQA[8:15] pins of LPDDR4 module */
|
|
11 10 8 9 12 15 13 14
|
|
/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
|
|
17 23 19 16 21 22 20 18
|
|
/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
|
|
31 29 26 25 28 27 24 30
|
|
|
|
/* LP4_PHYS_CH1B */
|
|
|
|
/* DQA[0:7] pins of LPDDR4 module */
|
|
4 3 7 5 6 1 0 2
|
|
/* DQA[8:15] pins of LPDDR4 module */
|
|
15 9 8 11 14 13 12 10
|
|
/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
|
|
20 23 22 21 18 19 16 17
|
|
/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
|
|
25 28 30 31 26 27 24 29>;
|
|
};
|