u-boot/board/freescale/t104xrdb/cpld.h
Tom Rini 8214b772cf T104xRDB: Remove non-TARGET_T1042D4RDB variants
At this point only the TARGET_T1042D4RDB variant of this is supported in
tree, so remove the remaining parts of the other platforms.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:49 -05:00

45 lines
1.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/**
* Copyright 2013 Freescale Semiconductor
*
* This file provides support for the ngPIXIS, a board-specific FPGA used on
* some Freescale reference boards.
*/
/*
* CPLD register set. Feel free to add board-specific #ifdefs where necessary.
*/
struct cpld_data {
u8 cpld_ver; /* 0x00 - CPLD Major Revision Register */
u8 cpld_ver_sub; /* 0x01 - CPLD Minor Revision Register */
u8 hw_ver; /* 0x02 - Hardware Revision Register */
u8 sw_ver; /* 0x03 - Software Revision register */
u8 res0[12]; /* 0x04 - 0x0F - not used */
u8 reset_ctl1; /* 0x10 - Reset control Register1 */
u8 reset_ctl2; /* 0x11 - Reset control Register2 */
u8 int_status; /* 0x12 - Interrupt status Register */
u8 flash_ctl_status; /* 0x13 - Flash control and status register */
u8 fan_ctl_status; /* 0x14 - Fan control and status register */
#if defined(CONFIG_TARGET_T1042D4RDB)
u8 int_mask; /* 0x15 - Interrupt mask Register */
#else
u8 led_ctl_status; /* 0x15 - LED control and status register */
#endif
u8 sfp_ctl_status; /* 0x16 - SFP control and status register */
u8 misc_ctl_status; /* 0x17 - Miscellanies ctrl & status register*/
u8 boot_override; /* 0x18 - Boot override register */
u8 boot_config1; /* 0x19 - Boot config override register*/
u8 boot_config2; /* 0x1A - Boot config override register*/
};
/* Pointer to the CPLD register set */
u8 cpld_read(unsigned int reg);
void cpld_write(unsigned int reg, u8 value);
#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
#define CPLD_WRITE(reg, value)\
cpld_write(offsetof(struct cpld_data, reg), value)
#define MISC_CTL_SG_SEL 0x80
#define MISC_CTL_AURORA_SEL 0x02
#define MISC_MUX_QE_TDM 0xc0