mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
a868e44333
Signed-off-by: Peter Howard <phoward@gme.net.au> [trini: Add config file, update for ..._ether_addr() -> ..._ethaddr() rename] Signed-off-by: Tom Rini <trini@konsulko.com>
28 lines
No EOL
1.1 KiB
Text
28 lines
No EOL
1.1 KiB
Text
Summary
|
|
=======
|
|
This README assumes you have read README.da850. It contains some additional
|
|
information specific to building the omapl138-lcdk. The AIS file as generated
|
|
by the build is, currently, not useable due to differences in the flash
|
|
available on this board, as compared to the da850evm boards.
|
|
|
|
Flash Differences
|
|
=================
|
|
Refer to the discussion in [1] for more detail - basically the da850evm uses
|
|
SPI flash whereas the lcdk uses NAND flash to store the bootloader, and
|
|
the support isn't there in the SPL code.
|
|
|
|
It should be possible to add the support in the SPL code should someone be
|
|
sufficiently motivated.
|
|
|
|
Using the built image
|
|
=====================
|
|
The output image to use is u-boot.bin. This needs to be converted to an
|
|
AIS file as described in [1] and then flashed using the utitilty linked to
|
|
there and also described in README.da850. You _may_ be able to write using
|
|
u-boot itself, but the commands in README.da850 won't work as they write to
|
|
SPI rather than NAND.
|
|
|
|
Links
|
|
=====
|
|
[1]
|
|
http://e2e.ti.com/support/dsp/omap_applications_processors/f/42/t/386829 |