mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
e22d5799dc
Enable USB PHY nodes on ASUS Transformers, Grouper, Enadevoru and LG X3. This is not mandatory since driver will use default values but preferable for new devices. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
240 lines
4.5 KiB
Text
240 lines
4.5 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "tegra30.dtsi"
|
|
|
|
/ {
|
|
model = "ASUS VivoTab RT TF600T";
|
|
compatible = "asus,tf600t", "nvidia,tegra30";
|
|
|
|
chosen {
|
|
stdout-path = &uarta;
|
|
};
|
|
|
|
aliases {
|
|
i2c0 = &pwr_i2c;
|
|
|
|
mmc0 = &sdmmc4; /* eMMC */
|
|
mmc1 = &sdmmc1; /* uSD slot */
|
|
|
|
rtc0 = &pmic;
|
|
rtc1 = "/rtc@7000e000";
|
|
|
|
spi0 = &spi4;
|
|
|
|
usb0 = &usb1;
|
|
usb1 = &usb3; /* Dock USB */
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x80000000>;
|
|
};
|
|
|
|
host1x@50000000 {
|
|
dc@54200000 {
|
|
clocks = <&tegra_car TEGRA30_CLK_DISP1>,
|
|
<&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
|
|
|
|
rgb {
|
|
status = "okay";
|
|
|
|
nvidia,panel = <&dsia>;
|
|
};
|
|
};
|
|
|
|
dsia: dsi@54300000 {
|
|
status = "okay";
|
|
|
|
avdd-dsi-csi-supply = <&avdd_dsi_csi>;
|
|
|
|
panel = <&panel>;
|
|
};
|
|
};
|
|
|
|
uarta: serial@70006000 {
|
|
status = "okay";
|
|
};
|
|
|
|
pwm: pwm@7000a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
pwr_i2c: i2c@7000d000 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
/* Texas Instruments TPS659110 PMIC */
|
|
pmic: tps65911@2d {
|
|
compatible = "ti,tps65911";
|
|
reg = <0x2d>;
|
|
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
|
|
ti,system-power-controller;
|
|
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
|
|
regulators {
|
|
vdd_1v2_bl: vdd1 {
|
|
regulator-name = "vdd_1v2_backlight";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcore_lcd: vdd2 {
|
|
regulator-name = "vcore_lcd";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_1v8_vio: vddio {
|
|
regulator-name = "vdd_1v8_gen";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* eMMC VDD */
|
|
vcore_emmc: ldo1 {
|
|
regulator-name = "vdd_emmc_core";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* uSD slot VDDIO */
|
|
vddio_usd: ldo5 {
|
|
regulator-name = "vddio_sdmmc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
avdd_dsi_csi: ldo6 {
|
|
regulator-name = "avdd_dsi_csi";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
spi4: spi@7000da00 {
|
|
status = "okay";
|
|
spi-max-frequency = <25000000>;
|
|
|
|
spi-flash@1 {
|
|
compatible = "winbond,w25q32", "jedec,spi-nor";
|
|
reg = <1>;
|
|
spi-max-frequency = <20000000>;
|
|
};
|
|
};
|
|
|
|
sdmmc1: sdhci@78000000 {
|
|
status = "okay";
|
|
bus-width = <4>;
|
|
|
|
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
|
|
power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
|
|
|
|
vmmc-supply = <&vdd_usd>;
|
|
vqmmc-supply = <&vddio_usd>;
|
|
};
|
|
|
|
sdmmc4: sdhci@78000600 {
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
non-removable;
|
|
|
|
vmmc-supply = <&vcore_emmc>;
|
|
vqmmc-supply = <&vdd_1v8_vio>;
|
|
};
|
|
|
|
/* USB via ASUS connector */
|
|
usb1: usb@7d000000 {
|
|
status = "okay";
|
|
dr_mode = "otg";
|
|
};
|
|
|
|
usb-phy@7d000000 {
|
|
status = "okay";
|
|
nvidia,hssync-start-delay = <0>;
|
|
nvidia,xcvr-lsfslew = <2>;
|
|
nvidia,xcvr-lsrslew = <2>;
|
|
};
|
|
|
|
/* Dock's USB port */
|
|
usb3: usb@7d008000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@7d008000 {
|
|
status = "okay";
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
|
|
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
|
|
power-supply = <&vdd_1v2_bl>;
|
|
pwms = <&pwm 0 71428>;
|
|
|
|
brightness-levels = <1 35 70 105 140 175 210 255>;
|
|
default-brightness-level = <5>;
|
|
};
|
|
|
|
/* PMIC has a built-in 32KHz oscillator which is used by PMC */
|
|
clk32k_in: clock-32k {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "pmic-oscillator";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
key-power {
|
|
label = "Power";
|
|
gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_ENTER>;
|
|
};
|
|
|
|
key-volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_UP>;
|
|
};
|
|
|
|
key-volume-down {
|
|
label = "Volume Down";
|
|
gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_DOWN>;
|
|
};
|
|
};
|
|
|
|
panel: panel {
|
|
compatible = "hydis,hv101hd1";
|
|
|
|
vdd-supply = <&vcore_lcd>;
|
|
enable-gpios = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
|
|
|
|
backlight = <&backlight>;
|
|
};
|
|
|
|
vdd_usd: regulator-usd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_usd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|