u-boot/board/keymile/km_arm/fpga_config.c
Wolfgang Denk 3fe63839f3 Minor Coding Style cleanup
Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-07-10 09:18:33 +02:00

255 lines
5.1 KiB
C

/*
* (C) Copyright 2012
* Valentin Lontgchamp, Keymile AG, valentin.longchamp@keymile.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <common.h>
#include <i2c.h>
#include <asm/errno.h>
/* GPIO Pin from kirkwood connected to PROGRAM_B pin of the xilinx FPGA */
#define KM_XLX_PROGRAM_B_PIN 39
#define BOCO_ADDR 0x10
#define ID_REG 0x00
#define BOCO2_ID 0x5b
static int check_boco2(void)
{
int ret;
u8 id;
ret = i2c_read(BOCO_ADDR, ID_REG, 1, &id, 1);
if (ret) {
printf("%s: error reading the BOCO id !!\n", __func__);
return ret;
}
return (id == BOCO2_ID);
}
static int boco_clear_bits(u8 reg, u8 flags)
{
int ret;
u8 regval;
/* give access to the EEPROM from FPGA */
ret = i2c_read(BOCO_ADDR, reg, 1, &regval, 1);
if (ret) {
printf("%s: error reading the BOCO @%#x !!\n",
__func__, reg);
return ret;
}
regval &= ~flags;
ret = i2c_write(BOCO_ADDR, reg, 1, &regval, 1);
if (ret) {
printf("%s: error writing the BOCO @%#x !!\n",
__func__, reg);
return ret;
}
return 0;
}
static int boco_set_bits(u8 reg, u8 flags)
{
int ret;
u8 regval;
/* give access to the EEPROM from FPGA */
ret = i2c_read(BOCO_ADDR, reg, 1, &regval, 1);
if (ret) {
printf("%s: error reading the BOCO @%#x !!\n",
__func__, reg);
return ret;
}
regval |= flags;
ret = i2c_write(BOCO_ADDR, reg, 1, &regval, 1);
if (ret) {
printf("%s: error writing the BOCO @%#x !!\n",
__func__, reg);
return ret;
}
return 0;
}
#define SPI_REG 0x06
#define CFG_EEPROM 0x02
#define FPGA_PROG 0x04
#define FPGA_INIT_B 0x10
#define FPGA_DONE 0x20
static int fpga_done(void)
{
int ret = 0;
u8 regval;
/* this is only supported with the boco2 design */
if (!check_boco2())
return 0;
ret = i2c_read(BOCO_ADDR, SPI_REG, 1, &regval, 1);
if (ret) {
printf("%s: error reading the BOCO @%#x !!\n",
__func__, SPI_REG);
return 0;
}
return regval & FPGA_DONE ? 1 : 0;
}
int skip;
int trigger_fpga_config(void)
{
int ret = 0;
/* if the FPGA is already configured, we do not want to
* reconfigure it */
skip = 0;
if (fpga_done()) {
printf("PCIe FPGA config: skipped\n");
skip = 1;
return 0;
}
if (check_boco2()) {
/* we have a BOCO2, this has to be triggered here */
/* make sure the FPGA_can access the EEPROM */
ret = boco_clear_bits(SPI_REG, CFG_EEPROM);
if (ret)
return ret;
/* trigger the config start */
ret = boco_clear_bits(SPI_REG, FPGA_PROG | FPGA_INIT_B);
if (ret)
return ret;
/* small delay for the pulse */
udelay(10);
/* up signal for pulse end */
ret = boco_set_bits(SPI_REG, FPGA_PROG);
if (ret)
return ret;
/* finally, raise INIT_B to remove the config delay */
ret = boco_set_bits(SPI_REG, FPGA_INIT_B);
if (ret)
return ret;
} else {
/* we do it the old way, with the gpio pin */
kw_gpio_set_valid(KM_XLX_PROGRAM_B_PIN, 1);
kw_gpio_direction_output(KM_XLX_PROGRAM_B_PIN, 0);
/* small delay for the pulse */
udelay(10);
kw_gpio_direction_input(KM_XLX_PROGRAM_B_PIN);
}
return 0;
}
int wait_for_fpga_config(void)
{
int ret = 0;
u8 spictrl;
u32 timeout = 20000;
if (skip)
return 0;
if (!check_boco2()) {
/* we do not have BOCO2, this is not really used */
return 0;
}
printf("PCIe FPGA config:");
do {
ret = i2c_read(BOCO_ADDR, SPI_REG, 1, &spictrl, 1);
if (ret) {
printf("%s: error reading the BOCO spictrl !!\n",
__func__);
return ret;
}
if (timeout-- == 0) {
printf(" FPGA_DONE timeout\n");
return -EFAULT;
}
udelay(10);
} while (!(spictrl & FPGA_DONE));
printf(" done\n");
return 0;
}
#define PRST1 0x4
#define PCIE_RST 0x10
#define TRAFFIC_RST 0x04
int fpga_reset(void)
{
int ret = 0;
u8 resets;
if (!check_boco2()) {
/* we do not have BOCO2, this is not really used */
return 0;
}
/* if we have skipped, we only want to reset the PCIe part */
resets = skip ? PCIE_RST : PCIE_RST | TRAFFIC_RST;
ret = boco_clear_bits(PRST1, resets);
if (ret)
return ret;
/* small delay for the pulse */
udelay(10);
ret = boco_set_bits(PRST1, resets);
if (ret)
return ret;
return 0;
}
/* the FPGA was configured, we configure the BOCO2 so that the EEPROM
* is available from the Bobcat SPI bus */
int toggle_eeprom_spi_bus(void)
{
int ret = 0;
if (!check_boco2()) {
/* we do not have BOCO2, this is not really used */
return 0;
}
ret = boco_set_bits(SPI_REG, CFG_EEPROM);
if (ret)
return ret;
return 0;
}