mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 07:43:07 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
259 lines
6.9 KiB
C
259 lines
6.9 KiB
C
/*
|
|
*
|
|
* (c) 2009 Emcraft Systems, Ilya Yanok <yanok@emcraft.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include <nand.h>
|
|
#include <power/pmic.h>
|
|
#include <fsl_pmic.h>
|
|
#include <asm/gpio.h>
|
|
#include "qong_fpga.h"
|
|
#include <watchdog.h>
|
|
#include <errno.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int dram_init(void)
|
|
{
|
|
/* dram_init must store complete ramsize in gd->ram_size */
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
PHYS_SDRAM_1_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
static void qong_fpga_reset(void)
|
|
{
|
|
gpio_set_value(QONG_FPGA_RST_PIN, 0);
|
|
udelay(30);
|
|
gpio_set_value(QONG_FPGA_RST_PIN, 1);
|
|
|
|
udelay(300);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
#ifdef CONFIG_QONG_FPGA
|
|
/* CS1: FPGA/Network Controller/GPIO, 16-bit, no DTACK */
|
|
static const struct mxc_weimcs cs1 = {
|
|
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
|
|
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 0, 0, 1),
|
|
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
|
|
CSCR_L(2, 0, 0, 4, 0, 0, 5, 0, 0, 0, 0, 1),
|
|
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
|
|
CSCR_A(0, 4, 0, 2, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0)
|
|
};
|
|
|
|
mxc_setup_weimcs(1, &cs1);
|
|
|
|
/* setup pins for FPGA */
|
|
mx31_gpio_mux(IOMUX_MODE(0x76, MUX_CTL_GPIO));
|
|
mx31_gpio_mux(IOMUX_MODE(0x7e, MUX_CTL_GPIO));
|
|
mx31_gpio_mux(IOMUX_MODE(0x91, MUX_CTL_OUT_FUNC | MUX_CTL_IN_GPIO));
|
|
mx31_gpio_mux(IOMUX_MODE(0x92, MUX_CTL_GPIO));
|
|
mx31_gpio_mux(IOMUX_MODE(0x93, MUX_CTL_GPIO));
|
|
|
|
/* FPGA reset Pin */
|
|
/* rstn = 0 */
|
|
gpio_direction_output(QONG_FPGA_RST_PIN, 0);
|
|
|
|
/* set interrupt pin as input */
|
|
gpio_direction_input(QONG_FPGA_IRQ_PIN);
|
|
|
|
/* FPGA JTAG Interface */
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SFS6, MUX_CTL_GPIO));
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SCK6, MUX_CTL_GPIO));
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CAPTURE, MUX_CTL_GPIO));
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_COMPARE, MUX_CTL_GPIO));
|
|
gpio_direction_output(QONG_FPGA_TCK_PIN, 0);
|
|
gpio_direction_output(QONG_FPGA_TMS_PIN, 0);
|
|
gpio_direction_output(QONG_FPGA_TDI_PIN, 0);
|
|
gpio_direction_input(QONG_FPGA_TDO_PIN);
|
|
#endif
|
|
|
|
/* setup pins for UART1 */
|
|
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
|
|
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
|
|
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
|
|
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
|
|
|
|
/* setup pins for SPI (pmic) */
|
|
mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
|
|
mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
|
|
mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
|
|
mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
|
|
mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
|
|
|
|
/* Setup pins for USB2 Host */
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_CLK, MUX_CTL_FUNC));
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DIR, MUX_CTL_FUNC));
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_NXT, MUX_CTL_FUNC));
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_STP, MUX_CTL_FUNC));
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DATA0, MUX_CTL_FUNC));
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DATA1, MUX_CTL_FUNC));
|
|
|
|
#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
|
|
|
|
mx31_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
|
|
mx31_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
|
|
mx31_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
|
|
mx31_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
|
|
mx31_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
|
|
mx31_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
|
|
mx31_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
|
|
mx31_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
|
|
mx31_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
|
|
mx31_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
|
|
mx31_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
|
|
mx31_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
|
|
|
|
mx31_set_gpr(MUX_PGP_UH2, 1);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* Chip selects */
|
|
/* CS0: Nor Flash #0 - it must be init'ed when executing from DDR */
|
|
/* Assumptions: HCLK = 133 MHz, tACC = 130ns */
|
|
static const struct mxc_weimcs cs0 = {
|
|
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
|
|
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 21, 0, 0, 6),
|
|
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
|
|
CSCR_L(0, 1, 3, 3, 1, 1, 5, 1, 0, 0, 0, 1),
|
|
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
|
|
CSCR_A(0, 1, 2, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0)
|
|
};
|
|
|
|
mxc_setup_weimcs(0, &cs0);
|
|
|
|
/* board id for linux */
|
|
gd->bd->bi_arch_number = MACH_TYPE_QONG;
|
|
gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
|
|
|
|
qong_fpga_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
u32 val;
|
|
struct pmic *p;
|
|
int ret;
|
|
|
|
ret = pmic_init(I2C_PMIC);
|
|
if (ret)
|
|
return ret;
|
|
|
|
p = pmic_get("FSL_PMIC");
|
|
if (!p)
|
|
return -ENODEV;
|
|
/* Enable RTC battery */
|
|
pmic_reg_read(p, REG_POWER_CTL0, &val);
|
|
pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
|
|
pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI);
|
|
|
|
#ifdef CONFIG_HW_WATCHDOG
|
|
hw_watchdog_init();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
printf("Board: DAVE/DENX Qong\n");
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
#ifdef CONFIG_QONG_FPGA
|
|
u32 tmp;
|
|
|
|
tmp = *(volatile u32*)QONG_FPGA_CTRL_VERSION;
|
|
printf("FPGA: ");
|
|
printf("version register = %u.%u.%u\n",
|
|
(tmp & 0xF000) >> 12, (tmp & 0x0F00) >> 8, tmp & 0x00FF);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_DNET)
|
|
return dnet_eth_initialize(0, (void *)CONFIG_DNET_BASE, -1);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_NAND_PLAT)
|
|
static void board_nand_setup(void)
|
|
{
|
|
/* CS3: NAND 8-bit */
|
|
static const struct mxc_weimcs cs3 = {
|
|
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
|
|
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 1, 15, 0, 0, 0),
|
|
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
|
|
CSCR_L(2, 0, 0, 1, 3, 1, 3, 3, 0, 0, 0, 1),
|
|
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
|
|
CSCR_A(0, 0, 0, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0)
|
|
};
|
|
|
|
mxc_setup_weimcs(3, &cs3);
|
|
|
|
mx31_set_gpr(MUX_SDCTL_CSD1_SEL, 1);
|
|
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO));
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_CE, MUX_CTL_IN_GPIO));
|
|
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_RB, MUX_CTL_IN_GPIO));
|
|
|
|
/* Make sure to reset the fpga else you cannot access NAND */
|
|
qong_fpga_reset();
|
|
|
|
/* Enable NAND flash */
|
|
gpio_set_value(15, 1);
|
|
gpio_set_value(14, 1);
|
|
gpio_direction_output(15, 0);
|
|
gpio_direction_input(16);
|
|
gpio_direction_input(14);
|
|
|
|
}
|
|
|
|
int qong_nand_rdy(void *chip)
|
|
{
|
|
udelay(1);
|
|
return gpio_get_value(16);
|
|
}
|
|
|
|
void qong_nand_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
if (chip >= 0)
|
|
gpio_set_value(15, 0);
|
|
else
|
|
gpio_set_value(15, 1);
|
|
|
|
}
|
|
|
|
void qong_nand_plat_init(void *chip)
|
|
{
|
|
struct nand_chip *nand = (struct nand_chip *)chip;
|
|
nand->chip_delay = 20;
|
|
nand->select_chip = qong_nand_select_chip;
|
|
nand->options &= ~NAND_BUSWIDTH_16;
|
|
board_nand_setup();
|
|
}
|
|
|
|
#endif
|