u-boot/board/mscc/common/spi.c
Horatiu Vultur c75c908316 MSCC: Add board support for Jaguar2 SOC family
Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00

31 lines
830 B
C

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Microsemi Coprporation
*/
#include <common.h>
#include <asm/io.h>
#include <spi.h>
void external_cs_manage(struct udevice *dev, bool enable)
{
u32 cs = spi_chip_select(dev);
/* IF_SI0_OWNER, select the owner of the SI interface
* Encoding: 0: SI Slave
* 1: SI Boot Master
* 2: SI Master Controller
*/
if (!enable) {
writel(ICPU_SW_MODE_SW_PIN_CTRL_MODE |
ICPU_SW_MODE_SW_SPI_CS(BIT(cs)),
BASE_CFG + ICPU_SW_MODE);
clrsetbits_le32(BASE_CFG + ICPU_GENERAL_CTRL,
ICPU_GENERAL_CTRL_IF_SI_OWNER_M,
ICPU_GENERAL_CTRL_IF_SI_OWNER(2));
} else {
writel(0, BASE_CFG + ICPU_SW_MODE);
clrsetbits_le32(BASE_CFG + ICPU_GENERAL_CTRL,
ICPU_GENERAL_CTRL_IF_SI_OWNER_M,
ICPU_GENERAL_CTRL_IF_SI_OWNER(1));
}
}