u-boot/arch/arm/mach-k3/j721e_init.c
Tom Rini dca7a8958f Prepare v2024.01-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmVbZ4QACgkQFHw5/5Y0
 tyzlggwAowkAYxSOUkwhWSbEYctVObZUPF1kDEbWlbskx52ZrQ56nWbfojZPKYdT
 OYe7fNrOJaYpbpU31lJ6U7Jm/iLCHw7vqMBmTJCNNr/BBW5jQ/exEVMa+/ZG640T
 6pTWqAHp3CfqNjBK9bnFmIqWTwrqUCZKNllPfEWNs1Pl00ypJsY9ZYaAw+4I9t0p
 2cG/BrSUyCDkgLYHi0YVUHXWQKYU4LVfz6EASGIOwTrrJGEUJ9EAGJmzgUSC0Zuw
 7qQBwHPXHBkpfP4bOFZ6xSKLp79rHXNSdjx21XW/4yerp4GC16xB+pZWZOSuz2J9
 0anoiSGPh1N81B6aciTOWeCdKPJeXEp1AxqyCcvmwLZrOOs+MSGjbKCUFnjyNtAJ
 hTXzlJQM6tQ3BhGQLY85sNe8/dOF3WNt4RiRM3K87mU8e0pahrYKSj5oUSbcrOBx
 4Hk6rQc33MvyLAYEhSJ3naktA0dPQseleOrXuOGdSWOlFf2sweVEjip4VKBlbUNb
 t3kEfQ9F
 =YBkC
 -----END PGP SIGNATURE-----

Merge tag 'v2024.01-rc3' into next

Prepare v2024.01-rc3
2023-11-20 09:19:50 -05:00

384 lines
9.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* J721E: SoC specific initialization
*
* Copyright (C) 2018-2019 Texas Instruments Incorporated - https://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#include <init.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/armv7_mpu.h>
#include <asm/arch/hardware.h>
#include "sysfw-loader.h"
#include "common.h"
#include <linux/soc/ti/ti_sci_protocol.h>
#include <dm.h>
#include <dm/uclass-internal.h>
#include <dm/pinctrl.h>
#include <dm/root.h>
#include <fdtdec.h>
#include <mmc.h>
#include <remoteproc.h>
#ifdef CONFIG_K3_LOAD_SYSFW
struct fwl_data cbass_hc_cfg0_fwls[] = {
#if defined(CONFIG_TARGET_J721E_R5_EVM)
{ "PCIE0_CFG", 2560, 8 },
{ "PCIE1_CFG", 2561, 8 },
{ "USB3SS0_CORE", 2568, 4 },
{ "USB3SS1_CORE", 2570, 4 },
{ "EMMC8SS0_CFG", 2576, 4 },
{ "UFS_HCI0_CFG", 2580, 4 },
{ "SERDES0", 2584, 1 },
{ "SERDES1", 2585, 1 },
#elif defined(CONFIG_TARGET_J7200_R5_EVM)
{ "PCIE1_CFG", 2561, 7 },
#endif
}, cbass_hc0_fwls[] = {
#if defined(CONFIG_TARGET_J721E_R5_EVM)
{ "PCIE0_HP", 2528, 24 },
{ "PCIE0_LP", 2529, 24 },
{ "PCIE1_HP", 2530, 24 },
{ "PCIE1_LP", 2531, 24 },
#endif
}, cbass_rc_cfg0_fwls[] = {
{ "EMMCSD4SS0_CFG", 2380, 4 },
}, cbass_rc0_fwls[] = {
{ "GPMC0", 2310, 8 },
}, infra_cbass0_fwls[] = {
{ "PLL_MMR0", 8, 26 },
{ "CTRL_MMR0", 9, 16 },
}, mcu_cbass0_fwls[] = {
{ "MCU_R5FSS0_CORE0", 1024, 4 },
{ "MCU_R5FSS0_CORE0_CFG", 1025, 2 },
{ "MCU_R5FSS0_CORE1", 1028, 4 },
{ "MCU_FSS0_CFG", 1032, 12 },
{ "MCU_FSS0_S1", 1033, 8 },
{ "MCU_FSS0_S0", 1036, 8 },
{ "MCU_PSROM49152X32", 1048, 1 },
{ "MCU_MSRAM128KX64", 1050, 8 },
{ "MCU_CTRL_MMR0", 1200, 8 },
{ "MCU_PLL_MMR0", 1201, 3 },
{ "MCU_CPSW0", 1220, 2 },
}, wkup_cbass0_fwls[] = {
{ "WKUP_CTRL_MMR0", 131, 16 },
};
#endif
static void ctrl_mmr_unlock(void)
{
/* Unlock all WKUP_CTRL_MMR0 module registers */
mmr_unlock(WKUP_CTRL_MMR0_BASE, 0);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 1);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 2);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 3);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 4);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 6);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 7);
/* Unlock all MCU_CTRL_MMR0 module registers */
mmr_unlock(MCU_CTRL_MMR0_BASE, 0);
mmr_unlock(MCU_CTRL_MMR0_BASE, 1);
mmr_unlock(MCU_CTRL_MMR0_BASE, 2);
mmr_unlock(MCU_CTRL_MMR0_BASE, 3);
mmr_unlock(MCU_CTRL_MMR0_BASE, 4);
/* Unlock all CTRL_MMR0 module registers */
mmr_unlock(CTRL_MMR0_BASE, 0);
mmr_unlock(CTRL_MMR0_BASE, 1);
mmr_unlock(CTRL_MMR0_BASE, 2);
mmr_unlock(CTRL_MMR0_BASE, 3);
mmr_unlock(CTRL_MMR0_BASE, 5);
if (soc_is_j721e())
mmr_unlock(CTRL_MMR0_BASE, 6);
mmr_unlock(CTRL_MMR0_BASE, 7);
}
#if defined(CONFIG_K3_LOAD_SYSFW)
void k3_mmc_stop_clock(void)
{
if (spl_boot_device() == BOOT_DEVICE_MMC1) {
struct mmc *mmc = find_mmc_device(0);
if (!mmc)
return;
mmc->saved_clock = mmc->clock;
mmc_set_clock(mmc, 0, true);
}
}
void k3_mmc_restart_clock(void)
{
if (spl_boot_device() == BOOT_DEVICE_MMC1) {
struct mmc *mmc = find_mmc_device(0);
if (!mmc)
return;
mmc_set_clock(mmc, mmc->saved_clock, false);
}
}
#endif
/*
* This uninitialized global variable would normal end up in the .bss section,
* but the .bss is cleared between writing and reading this variable, so move
* it to the .data section.
*/
u32 bootindex __section(".data");
static struct rom_extended_boot_data bootdata __section(".data");
static void store_boot_info_from_rom(void)
{
bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
memcpy(&bootdata, (uintptr_t *)ROM_EXTENDED_BOOT_DATA_INFO,
sizeof(struct rom_extended_boot_data));
}
#ifdef CONFIG_SPL_OF_LIST
void do_dt_magic(void)
{
int ret, rescan, mmc_dev = -1;
static struct mmc *mmc;
/* Perform board detection */
do_board_detect();
/*
* Board detection has been done.
* Let us see if another dtb wouldn't be a better match
* for our board
*/
if (IS_ENABLED(CONFIG_CPU_V7R)) {
ret = fdtdec_resetup(&rescan);
if (!ret && rescan) {
dm_uninit();
dm_init_and_scan(true);
}
}
/*
* Because of multi DTB configuration, the MMC device has
* to be re-initialized after reconfiguring FDT inorder to
* boot from MMC. Do this when boot mode is MMC and ROM has
* not loaded SYSFW.
*/
switch (spl_boot_device()) {
case BOOT_DEVICE_MMC1:
mmc_dev = 0;
break;
case BOOT_DEVICE_MMC2:
case BOOT_DEVICE_MMC2_2:
mmc_dev = 1;
break;
}
if (mmc_dev > 0 && !is_rom_loaded_sysfw(&bootdata)) {
ret = mmc_init_device(mmc_dev);
if (!ret) {
mmc = find_mmc_device(mmc_dev);
if (mmc) {
ret = mmc_init(mmc);
if (ret) {
printf("mmc init failed with error: %d\n", ret);
}
}
}
}
}
#endif
void board_init_f(ulong dummy)
{
#if defined(CONFIG_K3_J721E_DDRSS) || defined(CONFIG_K3_LOAD_SYSFW)
struct udevice *dev;
int ret;
#endif
/*
* Cannot delay this further as there is a chance that
* K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
*/
store_boot_info_from_rom();
/* Make all control module registers accessible */
ctrl_mmr_unlock();
#ifdef CONFIG_CPU_V7R
disable_linefill_optimization();
setup_k3_mpu_regions();
#endif
/* Init DM early */
spl_early_init();
#ifdef CONFIG_K3_LOAD_SYSFW
/*
* Process pinctrl for the serial0 a.k.a. MCU_UART0 module and continue
* regardless of the result of pinctrl. Do this without probing the
* device, but instead by searching the device that would request the
* given sequence number if probed. The UART will be used by the system
* firmware (SYSFW) image for various purposes and SYSFW depends on us
* to initialize its pin settings.
*/
ret = uclass_find_device_by_seq(UCLASS_SERIAL, 0, &dev);
if (!ret)
pinctrl_select_state(dev, "default");
/*
* Force probe of clk_k3 driver here to ensure basic default clock
* configuration is always done.
*/
if (IS_ENABLED(CONFIG_SPL_CLK_K3)) {
ret = uclass_get_device_by_driver(UCLASS_CLK,
DM_DRIVER_GET(ti_clk),
&dev);
if (ret)
panic("Failed to initialize clk-k3!\n");
}
/*
* Load, start up, and configure system controller firmware. Provide
* the U-Boot console init function to the SYSFW post-PM configuration
* callback hook, effectively switching on (or over) the console
* output.
*/
k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata),
k3_mmc_stop_clock, k3_mmc_restart_clock);
#ifdef CONFIG_SPL_OF_LIST
do_dt_magic();
#endif
/* Prepare console output */
preloader_console_init();
/* Disable ROM configured firewalls right after loading sysfw */
remove_fwl_configs(cbass_hc_cfg0_fwls, ARRAY_SIZE(cbass_hc_cfg0_fwls));
remove_fwl_configs(cbass_hc0_fwls, ARRAY_SIZE(cbass_hc0_fwls));
remove_fwl_configs(cbass_rc_cfg0_fwls, ARRAY_SIZE(cbass_rc_cfg0_fwls));
remove_fwl_configs(cbass_rc0_fwls, ARRAY_SIZE(cbass_rc0_fwls));
remove_fwl_configs(infra_cbass0_fwls, ARRAY_SIZE(infra_cbass0_fwls));
remove_fwl_configs(mcu_cbass0_fwls, ARRAY_SIZE(mcu_cbass0_fwls));
remove_fwl_configs(wkup_cbass0_fwls, ARRAY_SIZE(wkup_cbass0_fwls));
#else
/* Prepare console output */
preloader_console_init();
#endif
/* Output System Firmware version info */
k3_sysfw_print_ver();
/* Perform board detection */
do_board_detect();
#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0)
ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs),
&dev);
if (ret)
printf("AVS init failed: %d\n", ret);
#endif
#if defined(CONFIG_K3_J721E_DDRSS)
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
if (ret)
panic("DRAM init failed: %d\n", ret);
#endif
spl_enable_dcache();
}
u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
switch (boot_device) {
case BOOT_DEVICE_MMC1:
return (spl_mmc_emmc_boot_partition(mmc) ? MMCSD_MODE_EMMCBOOT : MMCSD_MODE_FS);
case BOOT_DEVICE_MMC2:
return MMCSD_MODE_FS;
default:
return MMCSD_MODE_RAW;
}
}
static u32 __get_backup_bootmedia(u32 main_devstat)
{
u32 bkup_boot = (main_devstat & MAIN_DEVSTAT_BKUP_BOOTMODE_MASK) >>
MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT;
switch (bkup_boot) {
case BACKUP_BOOT_DEVICE_USB:
return BOOT_DEVICE_DFU;
case BACKUP_BOOT_DEVICE_UART:
return BOOT_DEVICE_UART;
case BACKUP_BOOT_DEVICE_ETHERNET:
return BOOT_DEVICE_ETHERNET;
case BACKUP_BOOT_DEVICE_MMC2:
{
u32 port = (main_devstat & MAIN_DEVSTAT_BKUP_MMC_PORT_MASK) >>
MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT;
if (port == 0x0)
return BOOT_DEVICE_MMC1;
return BOOT_DEVICE_MMC2;
}
case BACKUP_BOOT_DEVICE_SPI:
return BOOT_DEVICE_SPI;
case BACKUP_BOOT_DEVICE_I2C:
return BOOT_DEVICE_I2C;
}
return BOOT_DEVICE_RAM;
}
static u32 __get_primary_bootmedia(u32 main_devstat, u32 wkup_devstat)
{
u32 bootmode = (wkup_devstat & WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT;
bootmode |= (main_devstat & MAIN_DEVSTAT_BOOT_MODE_B_MASK) <<
BOOT_MODE_B_SHIFT;
if (bootmode == BOOT_DEVICE_OSPI || bootmode == BOOT_DEVICE_QSPI)
bootmode = BOOT_DEVICE_SPI;
if (bootmode == BOOT_DEVICE_MMC2) {
u32 port = (main_devstat &
MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK) >>
MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT;
if (port == 0x0)
bootmode = BOOT_DEVICE_MMC1;
}
return bootmode;
}
u32 spl_spi_boot_bus(void)
{
u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT);
u32 main_devstat = readl(CTRLMMR_MAIN_DEVSTAT);
u32 bootmode = ((wkup_devstat & WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT) |
((main_devstat & MAIN_DEVSTAT_BOOT_MODE_B_MASK) << BOOT_MODE_B_SHIFT);
return (bootmode == BOOT_DEVICE_QSPI) ? 1 : 0;
}
u32 spl_boot_device(void)
{
u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT);
u32 main_devstat;
if (wkup_devstat & WKUP_DEVSTAT_MCU_OMLY_MASK) {
printf("ERROR: MCU only boot is not yet supported\n");
return BOOT_DEVICE_RAM;
}
/* MAIN CTRL MMR can only be read if MCU ONLY is 0 */
main_devstat = readl(CTRLMMR_MAIN_DEVSTAT);
if (bootindex == K3_PRIMARY_BOOTMODE)
return __get_primary_bootmedia(main_devstat, wkup_devstat);
else
return __get_backup_bootmedia(main_devstat);
}