u-boot/arch/arm/mach-at91
Erik van Luijk bfc37f3cb8 arm: at91: add support for mini-box picosam9g45 board
Bootlog:
U-Boot SPL 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21)
mci: setting clock 258000 Hz, block size 512
mci: setting clock 258000 Hz, block size 512
mci: setting clock 258000 Hz, block size 512
mci: setting clock 33024000 Hz, block size 512
reading u-boot.img
reading u-boot.img

U-Boot 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21 +0000)

CPU: AT91SAM9G45
Crystal frequency:       12 MHz
CPU clock        :      400 MHz
Master clock     :  133.333 MHz
       Watchdog enabled
DRAM:  256 MiB
WARNING: Caches not enabled
MMC:   mci: 0
mci: setting clock 260416 Hz, block size 512
mci: setting clock 260416 Hz, block size 512
mci: setting clock 260416 Hz, block size 512
mci: setting clock 33333333 Hz, block size 512
reading uboot.env
In:    serial
Out:   serial
Err:   serial
Net:   macb0
Error: macb0 address not set.

Hit any key to stop autoboot:  0
U-Boot>

Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
[add 'picosam9g45_defconfig' to MAINTAINERS]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-08-21 15:47:04 +02:00
..
arm920t ARM: at91: collect SoC sources into mach-at91 2015-02-21 08:23:51 -05:00
arm926ejs spl, common, serial: build SPL without serial support 2015-08-12 20:47:13 -04:00
armv7 ARM: atmel: armv7: switch to use common timer functions 2015-04-01 01:04:27 +02:00
include/mach arm: at91: pmc: replace the constant with a define in at91_pmc.h 2015-08-21 15:47:03 +02:00
config.mk ARM: at91: collect SoC sources into mach-at91 2015-02-21 08:23:51 -05:00
Kconfig arm: at91: add support for mini-box picosam9g45 board 2015-08-21 15:47:04 +02:00
Makefile arm, at91: support for sam9260 based smartweb board 2015-08-12 20:47:28 -04:00
mpddrc.c arm: at91: mpddr: allow multiple DDR controllers 2015-08-21 15:47:02 +02:00
phy.c ARM: at91: collect SoC sources into mach-at91 2015-02-21 08:23:51 -05:00
sdram.c ARM: at91: collect SoC sources into mach-at91 2015-02-21 08:23:51 -05:00
spl.c ARM: atmel: at91sam9x5ek: enable spl support 2015-04-01 01:04:31 +02:00
spl_at91.c spl, common, serial: build SPL without serial support 2015-08-12 20:47:13 -04:00
spl_atmel.c spl_atmel.c: Switch s_init to board_init_f 2015-04-01 01:04:27 +02:00