mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
85b8c5c4bf
Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile board/compulab/cm_t35/Makefile board/corscience/tricorder/Makefile board/ppcag/bg0900/Makefile drivers/bootcount/Makefile include/configs/omap4_common.h include/configs/pdnb3.h Makefile conflicts are due to additions/removals of object files on the ARM branch vs KBuild introduction on the main branch. Resolution consists in adjusting the list of object files in the main branch version. This also applies to two files which are not listed as conflicting but had to be modified: board/compulab/common/Makefile board/udoo/Makefile include/configs/omap4_common.h conflicts are due to the OMAP4 conversion to ti_armv7_common.h on the ARM side, and CONFIG_SYS_HZ removal on the main side. Resolution is to convert as this icludes removal of CONFIG_SYS_HZ. include/configs/pdnb3.h is due to a removal on ARM side. Trivial resolution is to remove the file. Note: 'git show' will also list two files just because they are new: include/configs/am335x_igep0033.h include/configs/omap3_igep00x0.h
169 lines
4.3 KiB
C
169 lines
4.3 KiB
C
/*
|
|
* Copyright (C) 2009
|
|
* Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
|
|
*
|
|
* Configuation settings for the Calao SBC35-A9G20 board
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* SoC type is defined in boards.cfg */
|
|
#include <asm/hardware.h>
|
|
#include <asm/sizes.h>
|
|
|
|
#if defined(CONFIG_SYS_USE_NANDFLASH)
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_EEPROM
|
|
#endif
|
|
|
|
#define MACH_TYPE_SBC35_A9G20 1848
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_SBC35_A9G20
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */
|
|
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
/* GPIO */
|
|
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
|
#define CONFIG_AT91_GPIO
|
|
|
|
/* Serial */
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
#undef CONFIG_CMD_BDI
|
|
#undef CONFIG_CMD_FPGA
|
|
#undef CONFIG_CMD_IMI
|
|
#undef CONFIG_CMD_IMLS
|
|
#undef CONFIG_CMD_LOADS
|
|
#undef CONFIG_CMD_SOURCE
|
|
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_USB
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
|
#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
/* SPI EEPROM */
|
|
#define CONFIG_SPI
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_ATMEL_SPI
|
|
#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
|
|
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_SPI_M95XXX
|
|
#define CONFIG_SYS_EEPROM_SIZE 0x10000
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
|
|
|
|
/* SPI RTC */
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_RTC_M41T94
|
|
#define CONFIG_M41T94_SPI_BUS 0
|
|
#define CONFIG_M41T94_SPI_CS 0
|
|
|
|
/* NAND flash */
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_NAND_ATMEL
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_DBW_8
|
|
/* our ALE is AD21 */
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
/* our CLE is AD22 */
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
|
|
|
|
/* NOR flash - no real flash on this board */
|
|
#define CONFIG_SYS_NO_FLASH 1
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_MACB
|
|
#define CONFIG_RMII
|
|
#define CONFIG_NET_RETRY_COUNT 20
|
|
#define CONFIG_RESET_PHY_R
|
|
#define CONFIG_MACB_SEARCH_PHY
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_CMD_FAT
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
|
|
|
/* Env in EEPROM, bootstrap + u-boot in NAND*/
|
|
#ifdef CONFIG_ENV_IS_IN_EEPROM
|
|
#define CONFIG_ENV_OFFSET 0x20
|
|
#define CONFIG_ENV_SIZE 0x1000
|
|
#endif
|
|
|
|
/* Env, bootstrap and u-boot in NAND */
|
|
#ifdef CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_OFFSET 0x60000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x80000
|
|
#define CONFIG_ENV_SIZE 0x20000
|
|
#endif
|
|
|
|
#define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000"
|
|
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
|
|
"root=/dev/mtdblock1 " \
|
|
"mtdparts=atmel_nand:16M(kernel)ro," \
|
|
"120M(rootfs),-(other) " \
|
|
"rw rootfstype=jffs2"
|
|
|
|
|
|
#define CONFIG_SYS_PROMPT "U-Boot> "
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_LONGHELP 1
|
|
#define CONFIG_CMDLINE_EDITING 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
|
|
|
|
#endif
|