mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
85b8c5c4bf
Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile board/compulab/cm_t35/Makefile board/corscience/tricorder/Makefile board/ppcag/bg0900/Makefile drivers/bootcount/Makefile include/configs/omap4_common.h include/configs/pdnb3.h Makefile conflicts are due to additions/removals of object files on the ARM branch vs KBuild introduction on the main branch. Resolution consists in adjusting the list of object files in the main branch version. This also applies to two files which are not listed as conflicting but had to be modified: board/compulab/common/Makefile board/udoo/Makefile include/configs/omap4_common.h conflicts are due to the OMAP4 conversion to ti_armv7_common.h on the ARM side, and CONFIG_SYS_HZ removal on the main side. Resolution is to convert as this icludes removal of CONFIG_SYS_HZ. include/configs/pdnb3.h is due to a removal on ARM side. Trivial resolution is to remove the file. Note: 'git show' will also list two files just because they are new: include/configs/am335x_igep0033.h include/configs/omap3_igep00x0.h
408 lines
11 KiB
C
408 lines
11 KiB
C
/*
|
|
* (C) Copyright 2008-2009
|
|
* BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
|
|
* Jens Scharsig <esw@bus-elektronik.de>
|
|
*
|
|
* Configuation settings for the EB+CPUx9K2 board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _CONFIG_EB_CPUx9K2_H_
|
|
#define _CONFIG_EB_CPUx9K2_H_
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_AT91RM9200 /* It's an Atmel AT91RM9200 SoC */
|
|
#define CONFIG_EB_CPUX9K2 /* on an EP+CPUX9K2 Board */
|
|
#define USE_920T_MMU
|
|
|
|
#define CONFIG_VERSION_VARIABLE
|
|
#define CONFIG_IDENT_STRING " on EB+CPUx9K2"
|
|
|
|
#include <asm/hardware.h> /* needed for port definitions */
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
#define MACH_TYPE_EB_CPUX9K2 1977
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
#ifndef CONFIG_RAMBOOT
|
|
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
|
#else
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_SYS_TEXT_BASE 0x21800000
|
|
#endif
|
|
#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
|
|
#define CONFIG_STANDALONE_LOAD_ADDR 0x21000000
|
|
|
|
#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
|
|
#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
|
|
|
|
#define CONFIG_BOOT_RETRY_TIME 30
|
|
#define CONFIG_CMDLINE_EDITING
|
|
|
|
#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
|
|
/*
|
|
* ARM asynchronous clock
|
|
*/
|
|
|
|
#define AT91C_MAIN_CLOCK 179404800 /* from 12.288 MHz * 73 / 5 */
|
|
#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)
|
|
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
|
|
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */
|
|
|
|
#define CONFIG_CMDLINE_TAG 1
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
|
|
/* flash */
|
|
#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
|
|
#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
|
|
|
|
/* clocks */
|
|
#define CONFIG_SYS_PLLAR_VAL 0x20483E05 /* 179.4048 MHz for PCK */
|
|
#define CONFIG_SYS_PLLBR_VAL 0x104C3E0A /* 47.3088 MHz (for USB) */
|
|
#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Clock */
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
|
|
|
/*
|
|
* sdram
|
|
*/
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0x00204000 /* use internal SRAM */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
|
|
CONFIG_SYS_SDRAM_SIZE - 0x00400000 - \
|
|
CONFIG_SYS_MALLOC_LEN)
|
|
|
|
#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* PIOC as D16/D31 */
|
|
#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
|
|
#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
|
|
#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
|
|
#define CONFIG_SYS_SDRC_CR_VAL 0x2188c159 /* set up the SDRAM */
|
|
#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */
|
|
#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */
|
|
#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */
|
|
#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
|
|
#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
|
|
#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
|
|
#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
|
|
#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
|
|
|
|
/*
|
|
* Command line configuration
|
|
*/
|
|
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_BMP
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_I2C_CMD_TREE
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_UBI
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_CMD_UBIFS
|
|
|
|
#define CONFIG_SYS_LONGHELP
|
|
|
|
/*
|
|
* MTD defines
|
|
*/
|
|
|
|
#define CONFIG_FLASH_CFI_MTD
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_RBTREE
|
|
#define CONFIG_LZO
|
|
|
|
#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand"
|
|
#define MTDPARTS_DEFAULT "mtdparts=" \
|
|
"physmap-flash.0:" \
|
|
"512k(U-Boot)," \
|
|
"128k(Env)," \
|
|
"128k(Splash)," \
|
|
"4M(Kernel)," \
|
|
"384k(MiniFS)," \
|
|
"-(FS)" \
|
|
";" \
|
|
"atmel_nand:" \
|
|
"1M(emergency)," \
|
|
"-(data)"
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_AT91C_PQFP_UHPBUG
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_ISO_PARTITION
|
|
#define CONFIG_EFI_PARTITION
|
|
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
|
|
|
|
/*
|
|
* UART/CONSOLE
|
|
*/
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID 0/* ignored in arm */
|
|
|
|
/*
|
|
* network
|
|
*/
|
|
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
#define CONFIG_RESET_PHY_R 1
|
|
|
|
#define CONFIG_DRIVER_AT91EMAC 1
|
|
#define CONFIG_DRIVER_AT91EMAC_QUIET 1
|
|
#define CONFIG_SYS_RX_ETH_BUFFER 8
|
|
#define CONFIG_MII 1
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* I2C-Bus
|
|
*/
|
|
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
|
|
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
|
|
#define CONFIG_SYS_I2C_SOFT_SLAVE 0
|
|
|
|
/* Software I2C driver configuration */
|
|
|
|
#define AT91_PIN_SDA (1<<25) /* AT91C_PIO_PA25 */
|
|
#define AT91_PIN_SCL (1<<26) /* AT91C_PIO_PA26 */
|
|
|
|
#define CONFIG_SYS_I2C_INIT_BOARD
|
|
|
|
#define I2C_INIT i2c_init_board();
|
|
#define I2C_ACTIVE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr);
|
|
#define I2C_TRISTATE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder);
|
|
#define I2C_READ ((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0)
|
|
#define I2C_SDA(bit) \
|
|
if (bit) \
|
|
writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr); \
|
|
else \
|
|
writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr);
|
|
#define I2C_SCL(bit) \
|
|
if (bit) \
|
|
writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr); \
|
|
else \
|
|
writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr);
|
|
|
|
#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED)
|
|
|
|
/* I2C-RTC */
|
|
|
|
#ifdef CONFIG_CMD_DATE
|
|
#define CONFIG_RTC_DS1338
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
#endif
|
|
|
|
/* EEPROM */
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
|
|
/* FLASH organization */
|
|
|
|
/* NOR-FLASH */
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45
|
|
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
|
|
#define PHYS_FLASH_1 0x10000000
|
|
#define PHYS_FLASH_SIZE 0x01000000 /* 16 megs main flash */
|
|
#define CONFIG_SYS_FLASH_CFI 1
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 6000
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 2000
|
|
|
|
/* NAND */
|
|
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_DBW_8 1
|
|
|
|
/* Status LED's */
|
|
|
|
#define CONFIG_STATUS_LED 1
|
|
#define CONFIG_BOARD_SPECIFIC_LED 1
|
|
|
|
#define STATUS_LED_BOOT 1
|
|
#define STATUS_LED_ACTIVE 0
|
|
|
|
#define STATUS_LED_BIT 1 /* AT91C_PIO_PD0 green LED */
|
|
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
|
|
#define STATUS_LED_STATE STATUS_LED_OFF /* BLINKING */
|
|
#define STATUS_LED_BIT1 2 /* AT91C_PIO_PD1 red LED */
|
|
#define STATUS_LED_STATE1 STATUS_LED_ON /* BLINKING */
|
|
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 4)
|
|
|
|
#define CONFIG_VIDEO 1
|
|
|
|
/* Options */
|
|
|
|
#ifdef CONFIG_VIDEO
|
|
|
|
#define CONFIG_VIDEO_VCXK 1
|
|
|
|
#define CONFIG_SPLASH_SCREEN 1
|
|
|
|
#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 4
|
|
#define CONFIG_SYS_VCXK_BASE 0x30000000
|
|
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN (1<<3)
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT piob
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR odr
|
|
|
|
#define CONFIG_SYS_VCXK_ENABLE_PIN (1<<5)
|
|
#define CONFIG_SYS_VCXK_ENABLE_PORT piob
|
|
#define CONFIG_SYS_VCXK_ENABLE_DDR oer
|
|
|
|
#define CONFIG_SYS_VCXK_REQUEST_PIN (1<<2)
|
|
#define CONFIG_SYS_VCXK_REQUEST_PORT piob
|
|
#define CONFIG_SYS_VCXK_REQUEST_DDR oer
|
|
|
|
#define CONFIG_SYS_VCXK_INVERT_PIN (1<<4)
|
|
#define CONFIG_SYS_VCXK_INVERT_PORT piob
|
|
#define CONFIG_SYS_VCXK_INVERT_DDR oer
|
|
|
|
#define CONFIG_SYS_VCXK_RESET_PIN (1<<6)
|
|
#define CONFIG_SYS_VCXK_RESET_PORT piob
|
|
#define CONFIG_SYS_VCXK_RESET_DDR oer
|
|
|
|
#endif /* CONFIG_VIDEO */
|
|
|
|
/* Environment */
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x80000)
|
|
#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_BOOTCOMMAND "run nfsboot"
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"dhcp $(copy_addr) uImage_cpux9k2;" \
|
|
"run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) boot=nfs " \
|
|
";echo $(bootargs)" \
|
|
";bootm"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"displaywidth=256\0" \
|
|
"displayheight=512\0" \
|
|
"displaybsteps=1023\0" \
|
|
"ubootaddr=10000000\0" \
|
|
"splashimage=100A0000\0" \
|
|
"kerneladdr=100C0000\0" \
|
|
"kernelsize=00400000\0" \
|
|
"rootfsaddr=10520000\0" \
|
|
"copy_addr=21200000\0" \
|
|
"rootfssize=00AE0000\0" \
|
|
"mtdids=" MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"bootargsdefaults=set bootargs " \
|
|
"console=ttyS0,115200 " \
|
|
"video=vcxk_fb:xres:${displaywidth}," \
|
|
"yres:${displayheight}," \
|
|
"bres:${displaybsteps} " \
|
|
"mem=62M " \
|
|
"panic=10 " \
|
|
"uboot=\\\"${ver}\\\" " \
|
|
"\0" \
|
|
"update_kernel=protect off $(kerneladdr) +$(kernelsize);" \
|
|
"dhcp $(copy_addr) uImage_cpux9k2;" \
|
|
"erase $(kerneladdr) +$(kernelsize);" \
|
|
"cp.b $(fileaddr) $(kerneladdr) $(filesize);" \
|
|
"protect on $(kerneladdr) +$(kernelsize)" \
|
|
"\0" \
|
|
"update_root=protect off $(rootfsaddr) +$(rootfssize);" \
|
|
"dhcp $(copy_addr) rfs;" \
|
|
"erase $(rootfsaddr) +$(rootfssize);" \
|
|
"cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \
|
|
"\0" \
|
|
"update_uboot=protect off 10000000 1007FFFF;" \
|
|
"dhcp $(copy_addr) u-boot_eb_cpux9k2;" \
|
|
"erase 10000000 1007FFFF;" \
|
|
"cp.b $(fileaddr) $(ubootaddr) $(filesize);" \
|
|
"protect on 10000000 1007FFFF;reset\0" \
|
|
"update_splash=protect off $(splashimage) +20000;" \
|
|
"dhcp $(copy_addr) splash_eb_cpux9k2.bmp;" \
|
|
"erase $(splashimage) +20000;" \
|
|
"cp.b $(fileaddr) $(splashimage) $(filesize);" \
|
|
"protect on $(splashimage) +20000;reset\0" \
|
|
"emergency=run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=emergency " \
|
|
";bootm $(kerneladdr)\0" \
|
|
"netemergency=run bootargsdefaults;" \
|
|
"dhcp $(copy_addr) uImage_cpux9k2;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=emergency " \
|
|
";bootm $(copy_addr)\0" \
|
|
"norboot=run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=local " \
|
|
";bootm $(kerneladdr)\0" \
|
|
"nandboot=run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=nand " \
|
|
";bootm $(kerneladdr)\0" \
|
|
" "
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
#endif
|
|
|
|
/* EOF */
|