mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
0cc11dea89
Switch to an SPL image. The SPL for Ventana does the following: - setup i2c and read the factory programmed EEPROM to obtain DRAM config and model for board-specific calibration data - configure DRAM per CPU/size/layout/devices/calibration - load u-boot.img from NAND and jump to it This allows for a single SPL+u-boot.img to replace the previous multiple boa configurations. Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
419 lines
12 KiB
C
419 lines
12 KiB
C
/*
|
|
* Copyright (C) 2014 Gateworks Corporation
|
|
* Author: Tim Harvey <tharvey@gateworks.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-ddr.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/imx-common/boot_mode.h>
|
|
#include <asm/imx-common/iomux-v3.h>
|
|
#include <asm/imx-common/mxc_i2c.h>
|
|
#include <spl.h>
|
|
|
|
#include "ventana_eeprom.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define RTT_NOM_120OHM /* use 120ohm Rtt_nom vs 60ohm (lower power) */
|
|
#define I2C_GSC 0
|
|
#define GSC_EEPROM_ADDR 0x51
|
|
#define GSC_EEPROM_DDR_SIZE 0x2B /* enum (512,1024,2048) MB */
|
|
#define GSC_EEPROM_DDR_WIDTH 0x2D /* enum (32,64) bit */
|
|
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
|
|
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* I2C1: GSC */
|
|
static struct i2c_pads_info mx6q_i2c_pad_info0 = {
|
|
.scl = {
|
|
.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
|
|
.gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
|
|
.gp = IMX_GPIO_NR(3, 21)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
|
|
.gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
|
|
.gp = IMX_GPIO_NR(3, 28)
|
|
}
|
|
};
|
|
static struct i2c_pads_info mx6dl_i2c_pad_info0 = {
|
|
.scl = {
|
|
.i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
|
|
.gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
|
|
.gp = IMX_GPIO_NR(3, 21)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
|
|
.gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
|
|
.gp = IMX_GPIO_NR(3, 28)
|
|
}
|
|
};
|
|
|
|
static void i2c_setup_iomux(void)
|
|
{
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info0);
|
|
else
|
|
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info0);
|
|
}
|
|
|
|
/* configure MX6Q/DUAL mmdc DDR io registers */
|
|
struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
|
|
/* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
|
|
.dram_sdclk_0 = 0x00020030,
|
|
.dram_sdclk_1 = 0x00020030,
|
|
.dram_cas = 0x00020030,
|
|
.dram_ras = 0x00020030,
|
|
.dram_reset = 0x00020030,
|
|
/* SDCKE[0:1]: 100k pull-up */
|
|
.dram_sdcke0 = 0x00003000,
|
|
.dram_sdcke1 = 0x00003000,
|
|
/* SDBA2: pull-up disabled */
|
|
.dram_sdba2 = 0x00000000,
|
|
/* SDODT[0:1]: 100k pull-up, 40 ohm */
|
|
.dram_sdodt0 = 0x00003030,
|
|
.dram_sdodt1 = 0x00003030,
|
|
/* SDQS[0:7]: Differential input, 40 ohm */
|
|
.dram_sdqs0 = 0x00000030,
|
|
.dram_sdqs1 = 0x00000030,
|
|
.dram_sdqs2 = 0x00000030,
|
|
.dram_sdqs3 = 0x00000030,
|
|
.dram_sdqs4 = 0x00000030,
|
|
.dram_sdqs5 = 0x00000030,
|
|
.dram_sdqs6 = 0x00000030,
|
|
.dram_sdqs7 = 0x00000030,
|
|
|
|
/* DQM[0:7]: Differential input, 40 ohm */
|
|
.dram_dqm0 = 0x00020030,
|
|
.dram_dqm1 = 0x00020030,
|
|
.dram_dqm2 = 0x00020030,
|
|
.dram_dqm3 = 0x00020030,
|
|
.dram_dqm4 = 0x00020030,
|
|
.dram_dqm5 = 0x00020030,
|
|
.dram_dqm6 = 0x00020030,
|
|
.dram_dqm7 = 0x00020030,
|
|
};
|
|
|
|
/* configure MX6Q/DUAL mmdc GRP io registers */
|
|
struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
|
|
/* DDR3 */
|
|
.grp_ddr_type = 0x000c0000,
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
/* disable DDR pullups */
|
|
.grp_ddrpke = 0x00000000,
|
|
/* ADDR[00:16], SDBA[0:1]: 40 ohm */
|
|
.grp_addds = 0x00000030,
|
|
/* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
|
|
.grp_ctlds = 0x00000030,
|
|
/* DATA[00:63]: Differential input, 40 ohm */
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_b0ds = 0x00000030,
|
|
.grp_b1ds = 0x00000030,
|
|
.grp_b2ds = 0x00000030,
|
|
.grp_b3ds = 0x00000030,
|
|
.grp_b4ds = 0x00000030,
|
|
.grp_b5ds = 0x00000030,
|
|
.grp_b6ds = 0x00000030,
|
|
.grp_b7ds = 0x00000030,
|
|
};
|
|
|
|
/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
|
|
struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
|
|
/* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
|
|
.dram_sdclk_0 = 0x00020030,
|
|
.dram_sdclk_1 = 0x00020030,
|
|
.dram_cas = 0x00020030,
|
|
.dram_ras = 0x00020030,
|
|
.dram_reset = 0x00020030,
|
|
/* SDCKE[0:1]: 100k pull-up */
|
|
.dram_sdcke0 = 0x00003000,
|
|
.dram_sdcke1 = 0x00003000,
|
|
/* SDBA2: pull-up disabled */
|
|
.dram_sdba2 = 0x00000000,
|
|
/* SDODT[0:1]: 100k pull-up, 40 ohm */
|
|
.dram_sdodt0 = 0x00003030,
|
|
.dram_sdodt1 = 0x00003030,
|
|
/* SDQS[0:7]: Differential input, 40 ohm */
|
|
.dram_sdqs0 = 0x00000030,
|
|
.dram_sdqs1 = 0x00000030,
|
|
.dram_sdqs2 = 0x00000030,
|
|
.dram_sdqs3 = 0x00000030,
|
|
.dram_sdqs4 = 0x00000030,
|
|
.dram_sdqs5 = 0x00000030,
|
|
.dram_sdqs6 = 0x00000030,
|
|
.dram_sdqs7 = 0x00000030,
|
|
|
|
/* DQM[0:7]: Differential input, 40 ohm */
|
|
.dram_dqm0 = 0x00020030,
|
|
.dram_dqm1 = 0x00020030,
|
|
.dram_dqm2 = 0x00020030,
|
|
.dram_dqm3 = 0x00020030,
|
|
.dram_dqm4 = 0x00020030,
|
|
.dram_dqm5 = 0x00020030,
|
|
.dram_dqm6 = 0x00020030,
|
|
.dram_dqm7 = 0x00020030,
|
|
};
|
|
|
|
/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
|
|
struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
|
|
/* DDR3 */
|
|
.grp_ddr_type = 0x000c0000,
|
|
/* SDQS[0:7]: Differential input, 40 ohm */
|
|
.grp_ddrmode_ctl = 0x00020000,
|
|
/* disable DDR pullups */
|
|
.grp_ddrpke = 0x00000000,
|
|
/* ADDR[00:16], SDBA[0:1]: 40 ohm */
|
|
.grp_addds = 0x00000030,
|
|
/* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
|
|
.grp_ctlds = 0x00000030,
|
|
/* DATA[00:63]: Differential input, 40 ohm */
|
|
.grp_ddrmode = 0x00020000,
|
|
.grp_b0ds = 0x00000030,
|
|
.grp_b1ds = 0x00000030,
|
|
.grp_b2ds = 0x00000030,
|
|
.grp_b3ds = 0x00000030,
|
|
.grp_b4ds = 0x00000030,
|
|
.grp_b5ds = 0x00000030,
|
|
.grp_b6ds = 0x00000030,
|
|
.grp_b7ds = 0x00000030,
|
|
};
|
|
|
|
/* MT41K128M16JT-125 */
|
|
static struct mx6_ddr3_cfg mt41k128m16jt_125 = {
|
|
.mem_speed = 1600,
|
|
.density = 2,
|
|
.width = 16,
|
|
.banks = 8,
|
|
.rowaddr = 14,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1375,
|
|
.trcmin = 4875,
|
|
.trasmin = 3500,
|
|
};
|
|
|
|
/* GW54xx specific calibration */
|
|
static struct mx6_mmdc_calibration gw54xxq_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x00190018,
|
|
.p0_mpwldectrl1 = 0x0021001D,
|
|
.p1_mpwldectrl0 = 0x00160027,
|
|
.p1_mpwldectrl1 = 0x0012001E,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x43370346,
|
|
.p0_mpdgctrl1 = 0x032A0321,
|
|
.p1_mpdgctrl0 = 0x433A034D,
|
|
.p1_mpdgctrl1 = 0x032F0235,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x3C313539,
|
|
.p1_mprddlctl = 0x37333140,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x37393C38,
|
|
.p1_mpwrdlctl = 0x42334538,
|
|
};
|
|
|
|
/* GW53xx specific calibration */
|
|
static struct mx6_mmdc_calibration gw53xxq_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x00160013,
|
|
.p0_mpwldectrl1 = 0x00090024,
|
|
.p1_mpwldectrl0 = 0x001F0018,
|
|
.p1_mpwldectrl1 = 0x000C001C,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x433A034C,
|
|
.p0_mpdgctrl1 = 0x0336032F,
|
|
.p1_mpdgctrl0 = 0x4343034A,
|
|
.p1_mpdgctrl1 = 0x03370222,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x3F343638,
|
|
.p1_mprddlctl = 0x38373442,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x343A3E39,
|
|
.p1_mpwrdlctl = 0x44344239,
|
|
};
|
|
static struct mx6_mmdc_calibration gw53xxdl_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x003C003C,
|
|
.p0_mpwldectrl1 = 0x00330038,
|
|
.p1_mpwldectrl0 = 0x001F002A,
|
|
.p1_mpwldectrl1 = 0x0022003F,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x42410244,
|
|
.p0_mpdgctrl1 = 0x022D022D,
|
|
.p1_mpdgctrl0 = 0x4234023A,
|
|
.p1_mpdgctrl1 = 0x021C0228,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x484A4C4B,
|
|
.p1_mprddlctl = 0x4B4D4E4B,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x33342B32,
|
|
.p1_mpwrdlctl = 0x3933332B,
|
|
};
|
|
|
|
/* GW52xx specific calibration */
|
|
static struct mx6_mmdc_calibration gw52xxdl_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x0040003F,
|
|
.p0_mpwldectrl1 = 0x00370037,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x42420244,
|
|
.p0_mpdgctrl1 = 0x022F022F,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x49464B4A,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x32362C32,
|
|
};
|
|
|
|
/* GW51xx specific calibration */
|
|
static struct mx6_mmdc_calibration gw51xxq_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x00150016,
|
|
.p0_mpwldectrl1 = 0x001F0017,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x433D034D,
|
|
.p0_mpdgctrl1 = 0x033D032F,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x3F313639,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x33393F36,
|
|
};
|
|
|
|
static struct mx6_mmdc_calibration gw51xxdl_mmdc_calib = {
|
|
/* write leveling calibration determine */
|
|
.p0_mpwldectrl0 = 0x003D003F,
|
|
.p0_mpwldectrl1 = 0x002F0038,
|
|
/* Read DQS Gating calibration */
|
|
.p0_mpdgctrl0 = 0x423A023A,
|
|
.p0_mpdgctrl1 = 0x022A0228,
|
|
/* Read Calibration: DQS delay relative to DQ read access */
|
|
.p0_mprddlctl = 0x48494C4C,
|
|
/* Write Calibration: DQ/DM delay relative to DQS write access */
|
|
.p0_mpwrdlctl = 0x34352D31,
|
|
};
|
|
|
|
static void spl_dram_init(int width, int size, int board_model)
|
|
{
|
|
struct mx6_ddr3_cfg *mem = &mt41k128m16jt_125;
|
|
struct mx6_mmdc_calibration *calib;
|
|
struct mx6_ddr_sysinfo sysinfo = {
|
|
/* width of data bus:0=16,1=32,2=64 */
|
|
.dsize = width/32,
|
|
/* config for full 4GB range so that get_mem_size() works */
|
|
.cs_density = 32, /* 32Gb per CS */
|
|
/* single chip select */
|
|
.ncs = 1,
|
|
.cs1_mirror = 0,
|
|
.rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */
|
|
#ifdef RTT_NOM_120OHM
|
|
.rtt_nom = 2 /*DDR3_RTT_120_OHM*/, /* RTT_Nom = RZQ/2 */
|
|
#else
|
|
.rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */
|
|
#endif
|
|
.walat = 1, /* Write additional latency */
|
|
.ralat = 5, /* Read additional latency */
|
|
.mif3_mode = 3, /* Command prediction working mode */
|
|
.bi_on = 1, /* Bank interleaving enabled */
|
|
.sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
|
|
.rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
|
|
};
|
|
|
|
/*
|
|
* MMDC Calibration requires the following data:
|
|
* mx6_mmdc_calibration - board-specific calibration (routing delays)
|
|
* mx6_ddr_sysinfo - board-specific memory architecture (width/cs/etc)
|
|
* mx6_ddr_cfg - chip specific timing/layout details
|
|
*/
|
|
switch (board_model) {
|
|
default:
|
|
case GW51xx:
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &gw51xxq_mmdc_calib;
|
|
else
|
|
calib = &gw51xxdl_mmdc_calib;
|
|
break;
|
|
case GW52xx:
|
|
calib = &gw52xxdl_mmdc_calib;
|
|
break;
|
|
case GW53xx:
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
calib = &gw53xxq_mmdc_calib;
|
|
else
|
|
calib = &gw53xxdl_mmdc_calib;
|
|
break;
|
|
case GW54xx:
|
|
calib = &gw54xxq_mmdc_calib;
|
|
break;
|
|
}
|
|
|
|
if (is_cpu_type(MXC_CPU_MX6Q))
|
|
mx6dq_dram_iocfg(width, &mx6dq_ddr_ioregs,
|
|
&mx6dq_grp_ioregs);
|
|
else
|
|
mx6sdl_dram_iocfg(width, &mx6sdl_ddr_ioregs,
|
|
&mx6sdl_grp_ioregs);
|
|
mx6_dram_cfg(&sysinfo, calib, mem);
|
|
}
|
|
|
|
/*
|
|
* called from C runtime startup code (arch/arm/lib/crt0.S:_main)
|
|
* - we have a stack and a place to store GD, both in SRAM
|
|
* - no variable global data is available
|
|
*/
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
struct ventana_board_info ventana_info;
|
|
int board_model;
|
|
|
|
/*
|
|
* Zero out global data:
|
|
* - this shoudl be done by crt0.S
|
|
* - failure to zero it will cause i2c_setup to fail
|
|
*/
|
|
memset((void *)gd, 0, sizeof(struct global_data));
|
|
|
|
/* setup AIPS and disable watchdog */
|
|
arch_cpu_init();
|
|
|
|
/* iomux and setup of i2c */
|
|
board_early_init_f();
|
|
i2c_setup_iomux();
|
|
|
|
/* setup GP timer */
|
|
timer_init();
|
|
|
|
/* UART clocks enabled and gd valid - init serial console */
|
|
preloader_console_init();
|
|
|
|
/* read/validate EEPROM info to determine board model and SDRAM cfg */
|
|
board_model = read_eeprom(I2C_GSC, &ventana_info);
|
|
|
|
/* provide some some default: 32bit 128MB */
|
|
if (GW_UNKNOWN == board_model) {
|
|
ventana_info.sdram_width = 2;
|
|
ventana_info.sdram_size = 3;
|
|
}
|
|
|
|
/* configure MMDC for SDRAM width/size and per-model calibration */
|
|
spl_dram_init(8 << ventana_info.sdram_width,
|
|
16 << ventana_info.sdram_size,
|
|
board_model);
|
|
|
|
/* Clear the BSS. */
|
|
memset(__bss_start, 0, __bss_end - __bss_start);
|
|
|
|
/* load/boot image from boot device */
|
|
board_init_r(NULL, 0);
|
|
}
|
|
|
|
void reset_cpu(ulong addr)
|
|
{
|
|
}
|