Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 15:37:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/power/twl4030.c
Igor Opaniuk 2147a16983 dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO 
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.

CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.

All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
     's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +

Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-21 06:08:00 +01:00

221 lines
5.8 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2009 Wind River Systems, Inc.
* Tom Rix <Tom.Rix at windriver.com>
*
* twl4030_power_reset_init is derived from code on omapzoom,
* git://git.omapzoom.com/repo/u-boot.git
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
*
* twl4030_power_init is from cpu/omap3/common.c, power_init_r
*
* (C) Copyright 2004-2008
* Texas Instruments, <www.ti.com>
*
* Author :
* Sunil Kumar <sunilsaini05 at gmail.com>
* Shashi Ranjan <shashiranjanmca05 at gmail.com>
*
* Derived from Beagle Board and 3430 SDP code by
* Richard Woodruff <r-woodruff2 at ti.com>
* Syed Mohammed Khasim <khasim at ti.com>
*/
#include <command.h>
#include <twl4030.h>
#include <linux/delay.h>
/*
* Power Reset
*/
void twl4030_power_reset_init(void)
{
u8 val = 0;
if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_P1_SW_EVENTS, &val)) {
printf("Error:TWL4030: failed to read the power register\n");
printf("Could not initialize hardware reset\n");
} else {
val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_P1_SW_EVENTS, val)) {
printf("Error:TWL4030: failed to write the power register\n");
printf("Could not initialize hardware reset\n");
}
}
}
/*
* Power off
*/
void twl4030_power_off(void)
{
u8 data;
/* PM master unlock (CFG and TST keys) */
data = 0xCE;
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_PROTECT_KEY, data);
data = 0xEC;
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_PROTECT_KEY, data);
/* VBAT start disable */
twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_CFG_P1_TRANSITION, &data);
data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT;
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_CFG_P1_TRANSITION, data);
twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_CFG_P2_TRANSITION, &data);
data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT;
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_CFG_P2_TRANSITION, data);
twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_CFG_P3_TRANSITION, &data);
data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT;
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_CFG_P3_TRANSITION, data);
/* High jitter for PWRANA2 */
twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_CFG_PWRANA2, &data);
data &= ~(TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT0_LOWV |
TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT1_LOWV);
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_CFG_PWRANA2, data);
/* PM master lock */
data = 0xFF;
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_PROTECT_KEY, data);
/* Power off */
twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_P1_SW_EVENTS, &data);
data |= TWL4030_PM_MASTER_SW_EVENTS_DEVOFF;
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
TWL4030_PM_MASTER_P1_SW_EVENTS, data);
}
/*
* Set Device Group and Voltage
*/
void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
u8 dev_grp, u8 dev_grp_sel)
{
int ret;
/* Select the Voltage */
ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg,
vsel_val);
if (ret != 0) {
printf("Could not write vsel to reg %02x (%d)\n",
vsel_reg, ret);
return;
}
/* Select the Device Group (enable the supply if dev_grp_sel != 0) */
ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp,
dev_grp_sel);
if (ret != 0)
printf("Could not write grp_sel to reg %02x (%d)\n",
dev_grp, ret);
}
void twl4030_power_init(void)
{
/* set VAUX3 to 2.8V */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED,
TWL4030_PM_RECEIVER_VAUX3_VSEL_28,
TWL4030_PM_RECEIVER_VAUX3_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
/* set VPLL2 to 1.8V */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED,
TWL4030_PM_RECEIVER_VPLL2_VSEL_18,
TWL4030_PM_RECEIVER_VPLL2_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_ALL);
/* set VDAC to 1.8V */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED,
TWL4030_PM_RECEIVER_VDAC_VSEL_18,
TWL4030_PM_RECEIVER_VDAC_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
}
void twl4030_power_mmc_init(int dev_index)
{
if (dev_index == 0) {
/* Set VMMC1 to 3.15 Volts */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
mdelay(100); /* ramp-up delay from Linux code */
} else if (dev_index == 1) {
/* Set VMMC2 to 3.15 Volts */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
mdelay(100); /* ramp-up delay from Linux code */
}
}
#ifdef CONFIG_CMD_POWEROFF
int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
twl4030_power_off();
return 0;
}
#endif
#if CONFIG_IS_ENABLED(DM_I2C)
int twl4030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
{
struct udevice *dev;
int ret;
ret = i2c_get_chip_for_busnum(0, chip_no, 1, &dev);
if (ret) {
pr_err("unable to get I2C bus. ret %d\n", ret);
return ret;
}
ret = dm_i2c_reg_write(dev, reg, val);
if (ret) {
pr_err("writing to twl4030 failed. ret %d\n", ret);
return ret;
}
return 0;
}
int twl4030_i2c_read(u8 chip_no, u8 reg, u8 *valp, int len)
{
struct udevice *dev;
int ret;
ret = i2c_get_chip_for_busnum(0, chip_no, 1, &dev);
if (ret) {
pr_err("unable to get I2C bus. ret %d\n", ret);
return ret;
}
ret = dm_i2c_read(dev, reg, valp, len);
if (ret) {
pr_err("reading from twl4030 failed. ret %d\n", ret);
return ret;
}
return 0;
}
#endif
Reference in a new issue View git blame Copy permalink