mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 19:43:33 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
88 lines
2.9 KiB
C
88 lines
2.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* From Coreboot file of same name
|
|
*
|
|
* Copyright (C) 2007-2009 coresystems GmbH
|
|
* 2012 secunet Security Networks AG
|
|
*/
|
|
|
|
#ifndef _ASM_SPEEDSTEP_H
|
|
#define _ASM_SPEEDSTEP_H
|
|
|
|
/* Magic value used to locate speedstep configuration in the device tree */
|
|
#define SPEEDSTEP_APIC_MAGIC 0xACAC
|
|
|
|
/* MWAIT coordination I/O base address. This must match
|
|
* the \_PR_.CPU0 PM base address.
|
|
*/
|
|
#define PMB0_BASE 0x510
|
|
|
|
/* PMB1: I/O port that triggers SMI once cores are in the same state.
|
|
* See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4]
|
|
*/
|
|
#define PMB1_BASE 0x800
|
|
|
|
struct sst_state {
|
|
uint8_t dynfsb:1; /* whether this is SLFM */
|
|
uint8_t nonint:1; /* add .5 to ratio */
|
|
uint8_t ratio:6;
|
|
uint8_t vid;
|
|
uint8_t is_turbo;
|
|
uint8_t is_slfm;
|
|
uint32_t power;
|
|
};
|
|
#define SPEEDSTEP_RATIO_SHIFT 8
|
|
#define SPEEDSTEP_RATIO_DYNFSB_SHIFT (7 + SPEEDSTEP_RATIO_SHIFT)
|
|
#define SPEEDSTEP_RATIO_DYNFSB (1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT)
|
|
#define SPEEDSTEP_RATIO_NONINT_SHIFT (6 + SPEEDSTEP_RATIO_SHIFT)
|
|
#define SPEEDSTEP_RATIO_NONINT (1 << SPEEDSTEP_RATIO_NONINT_SHIFT)
|
|
#define SPEEDSTEP_RATIO_VALUE_MASK (0x1f << SPEEDSTEP_RATIO_SHIFT)
|
|
#define SPEEDSTEP_VID_MASK 0x3f
|
|
#define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){ \
|
|
0, /* dynfsb won't be read. */ \
|
|
((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0, \
|
|
(((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK) \
|
|
>> SPEEDSTEP_RATIO_SHIFT), \
|
|
(val & mask) & SPEEDSTEP_VID_MASK, \
|
|
0, /* not turbo by default */ \
|
|
0, /* not slfm by default */ \
|
|
0 /* power is hardcoded in software. */ \
|
|
})
|
|
#define SPEEDSTEP_ENCODE_STATE(state) ( \
|
|
((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) | \
|
|
((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) | \
|
|
((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) | \
|
|
((uint16_t)(state).vid & SPEEDSTEP_VID_MASK))
|
|
#define SPEEDSTEP_DOUBLE_RATIO(state) ( \
|
|
((uint8_t)(state).ratio * 2) + (state).nonint)
|
|
|
|
struct sst_params {
|
|
struct sst_state slfm;
|
|
struct sst_state min;
|
|
struct sst_state max;
|
|
struct sst_state turbo;
|
|
};
|
|
|
|
/* Looking at core2's spec, the highest normal bus ratio for an eist enabled
|
|
processor is 14, the lowest is always 6. This makes 5 states with the
|
|
minimal step width of 2. With turbo mode and super LFM we have at most 7. */
|
|
#define SPEEDSTEP_MAX_NORMAL_STATES 5
|
|
#define SPEEDSTEP_MAX_STATES (SPEEDSTEP_MAX_NORMAL_STATES + 2)
|
|
struct sst_table {
|
|
/* Table of p-states for EMTTM and ACPI by decreasing performance. */
|
|
struct sst_state states[SPEEDSTEP_MAX_STATES];
|
|
int num_states;
|
|
};
|
|
|
|
void speedstep_gen_pstates(struct sst_table *);
|
|
|
|
#define SPEEDSTEP_MAX_POWER_YONAH 31000
|
|
#define SPEEDSTEP_MIN_POWER_YONAH 13100
|
|
#define SPEEDSTEP_MAX_POWER_MEROM 35000
|
|
#define SPEEDSTEP_MIN_POWER_MEROM 25000
|
|
#define SPEEDSTEP_SLFM_POWER_MEROM 12000
|
|
#define SPEEDSTEP_MAX_POWER_PENRYN 35000
|
|
#define SPEEDSTEP_MIN_POWER_PENRYN 15000
|
|
#define SPEEDSTEP_SLFM_POWER_PENRYN 12000
|
|
|
|
#endif
|