Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-23 11:33:32 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/imx7ulp-evk.dts
Peng Fan 77fa04577a imx: imx7ulp: add EVK board support 
Add EVK board support.
Add the evk dts file.

LOG:
U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800)

CPU:   Freescale i.MX7ULP rev1.0 at 500 MHz
Reset cause: POR
Boot mode: Dual boot
Model: NXP i.MX7ULP EVK
DRAM:  1 GiB
MMC:   FSL_SDHC: 0
In:    serial@402D0000
Out:   serial@402D0000
Err:   serial@402D0000
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2017-03-17 09:27:08 +01:00

426 lines
9 KiB
Text
Raw Blame History

/*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "imx7ulp.dtsi"
/ {
model = "NXP i.MX7ULP EVK";
compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp", "Generic DT based system";
chosen {
bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x402D0010,115200";
stdout-path = &lpuart4;
};
bcmdhd_wlan_0: bcmdhd_wlan@0 {
compatible = "android,bcmdhd_wlan";
wlreg_on-supply = <&wlreg_on>;
bcmdhd_fw = "/lib/firmware/bcm/1DX_BCM4343W/fw_bcmdhd.bin";
bcmdhd_nv = "/lib/firmware/bcm/1DX_BCM4343W/bcmdhd.1DX.SDIO.cal";
};
memory {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
backlight {
compatible = "gpio-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
default-on;
status = "okay";
};
mipi_dsi_reset: mipi-dsi-reset {
compatible = "gpio-reset";
reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
reset-delay-us = <1000>;
#reset-cells = <0>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
wlreg_on: fixedregulator@100 {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "wlreg_on";
gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
startup-delay-us = <100>;
enable-active-high;
};
reg_usb_otg1_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg1>;
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_vsd_3v3: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_vsd_3v3b: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "VSD_3V3B";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_extcon_usb1>;
};
pf1550-rpmsg {
compatible = "fsl,pf1550-rpmsg";
sw1_reg: SW1 {
regulator-name = "SW1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1387500>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: SW2 {
regulator-name = "SW2";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1387500>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: SW3 {
regulator-name = "SW3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: VREFDDR {
regulator-name = "VREFDDR";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
vldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vldo3_reg: LDO3 {
regulator-name = "LDO3";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
&iomuxc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog_1>;
imx7ulp-evk {
pinctrl_hog_1: hoggrp-1 {
fsl,pins = <
ULP1_PAD_PTC10__PTC10 0x30100 /* USDHC0 CD */
ULP1_PAD_PTC1__PTC1 0x20100
ULP1_PAD_PTD0__PTD0 0x30100 /* USDHC0 RST */
ULP1_PAD_PTE13__PTE13 0x30103 /* USDHC1 CD */
ULP1_PAD_PTE12__PTE12 0x30103 /* USDHC1 WP */
ULP1_PAD_PTE14__SDHC1_VS 0x843 /* USDHC1 VSEL */
>;
};
pinctrl_backlight: backlight_grp {
fsl,pins = <
ULP1_PAD_PTF2__PTF2 0x20100
>;
};
pinctrl_lpi2c5: lpi2c5grp {
fsl,pins = <
ULP1_PAD_PTC4__LPI2C5_SCL 0x527
ULP1_PAD_PTC5__LPI2C5_SDA 0x527
>;
};
pinctrl_mipi_dsi_reset: mipi_dsi_reset_grp {
fsl,pins = <
ULP1_PAD_PTC19__PTC19 0x20103
>;
};
pinctrl_lpuart4: lpuart4grp {
fsl,pins = <
ULP1_PAD_PTC3__LPUART4_RX 0x400
ULP1_PAD_PTC2__LPUART4_TX 0x400
>;
};
pinctrl_lpuart6: lpuart6grp {
fsl,pins = <
ULP1_PAD_PTE10__LPUART6_TX 0x400
ULP1_PAD_PTE11__LPUART6_RX 0x400
ULP1_PAD_PTE9__LPUART6_RTS_B 0x400
ULP1_PAD_PTE8__LPUART6_CTS_B 0x400
ULP1_PAD_PTE7__PTE7 0x00 /* BT_REG_ON */
>;
};
pinctrl_lpuart7: lpuart7grp {
fsl,pins = <
ULP1_PAD_PTF14__LPUART7_TX 0x400
ULP1_PAD_PTF15__LPUART7_RX 0x400
ULP1_PAD_PTF13__LPUART7_RTS_B 0x400
ULP1_PAD_PTF12__LPUART7_CTS_B 0x400
>;
};
pinctrl_usdhc0: usdhc0grp {
fsl,pins = <
ULP1_PAD_PTD1__SDHC0_CMD 0x843
ULP1_PAD_PTD2__SDHC0_CLK 0x10843
ULP1_PAD_PTD7__SDHC0_D3 0x843
ULP1_PAD_PTD8__SDHC0_D2 0x843
ULP1_PAD_PTD9__SDHC0_D1 0x843
ULP1_PAD_PTD10__SDHC0_D0 0x843
>;
};
pinctrl_usdhc0_8bit: usdhc0grp_8bit {
fsl,pins = <
ULP1_PAD_PTD1__SDHC0_CMD 0x843
ULP1_PAD_PTD2__SDHC0_CLK 0x843
ULP1_PAD_PTD3__SDHC0_D7 0x843
ULP1_PAD_PTD4__SDHC0_D6 0x843
ULP1_PAD_PTD5__SDHC0_D5 0x843
ULP1_PAD_PTD6__SDHC0_D4 0x843
ULP1_PAD_PTD7__SDHC0_D3 0x843
ULP1_PAD_PTD8__SDHC0_D2 0x843
ULP1_PAD_PTD9__SDHC0_D1 0x843
ULP1_PAD_PTD10__SDHC0_D0 0x843
>;
};
pinctrl_lpi2c7: lpi2c7grp {
fsl,pins = <
ULP1_PAD_PTF12__LPI2C7_SCL 0x527
ULP1_PAD_PTF13__LPI2C7_SDA 0x527
>;
};
pinctrl_lpspi3: lpspi3grp {
fsl,pins = <
ULP1_PAD_PTF16__LPSPI3_SIN 0x300
ULP1_PAD_PTF17__LPSPI3_SOUT 0x300
ULP1_PAD_PTF18__LPSPI3_SCK 0x300
ULP1_PAD_PTF19__LPSPI3_PCS0 0x300
>;
};
pinctrl_usb_otg1: usbotg1grp {
fsl,pins = <
ULP1_PAD_PTC0__PTC0 0x30100
>;
};
pinctrl_extcon_usb1: extcon1grp {
fsl,pins = <
ULP1_PAD_PTC8__PTC8 0x30103
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
ULP1_PAD_PTE3__SDHC1_CMD 0x843
ULP1_PAD_PTE2__SDHC1_CLK 0x843
ULP1_PAD_PTE1__SDHC1_D0 0x843
ULP1_PAD_PTE0__SDHC1_D1 0x843
ULP1_PAD_PTE5__SDHC1_D2 0x843
ULP1_PAD_PTE4__SDHC1_D3 0x843
>;
};
pinctrl_usdhc1_rst: usdhc1grp_rst {
fsl,pins = <
ULP1_PAD_PTE11__PTE11 0x30100 /* USDHC1 RST */
>;
};
pinctrl_wifi: wifigrp {
fsl,pins = <
ULP1_PAD_PTE6__PTE6 0x43 /* WL_REG_ON */
>;
};
};
};
&lcdif {
status = "okay";
disp-dev = "mipi_dsi_northwest";
display = <&display0>;
display0: display {
bits-per-pixel = <16>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <9200000>;
hactive = <480>;
vactive = <272>;
hfront-porch = <8>;
hback-porch = <4>;
hsync-len = <41>;
vback-porch = <2>;
vfront-porch = <4>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&lpi2c7 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c7>;
};
&lpi2c5 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c5>;
status = "okay";
fxas2100x@20 {
compatible = "fsl,fxas2100x";
reg = <0x20>;
};
fxos8700@1e {
compatible = "fsl,fxos8700";
reg = <0x1e>;
};
mpl3115@60 {
compatible = "fsl,mpl3115";
reg = <0x60>;
};
};
&lpspi3 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpspi3>;
status = "okay";
spidev0: spi@0 {
reg = <0>;
compatible = "rohm,dh2228fv";
spi-max-frequency = <1000000>;
};
};
&mipi_dsi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mipi_dsi_reset>;
lcd_panel = "TRULY-WVGA-TFT3P5581E";
resets = <&mipi_dsi_reset>;
status = "okay";
};
&lpuart4 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart4>;
status = "okay";
};
&lpuart6 { /* BT */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart6>;
status = "okay";
};
&lpuart7 { /* Uart test */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart7>;
status = "disabled";
};
&rpmsg{
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usb_otg1_vbus>;
extcon = <0>, <&extcon_usb1>;
srp-disable;
hnp-disable;
adp-disable;
status = "okay";
};
&usdhc0 {
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc0>;
pinctrl-1 = <&pinctrl_usdhc0>;
pinctrl-2 = <&pinctrl_usdhc0>;
pinctrl-3 = <&pinctrl_usdhc0>;
cd-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_vsd_3v3>;
vqmmc-supply = <&vldo2_reg>;
status = "okay";
};
Reference in a new issue View git blame Copy permalink