mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 07:34:31 +00:00
4ba31ab33a
This feature is useful when your board uses different mii buses for different
phys and all (or a part) of these buses are implemented via bit-banging mode.
The driver requires that the following macros should be defined into the board
configuration file:
CONFIG_BITBANGMII - Enable the miiphybb driver
CONFIG_BITBANGMII_MULTI - Enable the multi bus support
If the CONFIG_BITBANGMII_MULTI is not defined, the board's config file needs
to define at least the following macros:
MII_INIT - Generic code to enable the MII bus (optional)
MDIO_DECLARE - Declaration needed to access to the MDIO pin (optional)
MDIO_ACTIVE - Activate the MDIO pin as out pin
MDIO_TRISTATE - Activate the MDIO pin as input/tristate pin
MDIO_READ - Read the MDIO pin
MDIO(v) - Write v on the MDIO pin
MDC_DECLARE - Declaration needed to access to the MDC pin (optional)
MDC(v) - Write v on the MDC pin
The previous macros make the driver compatible with the previous version
(that didn't support the multi-bus).
When the CONFIG_BITBANGMII_MULTI is also defined, the board code needs to fill
the bb_miiphy_buses[] array with a record for each required bus and declare
the bb_miiphy_buses_num variable with the number of mii buses.
The record (struct bb_miiphy_bus) has the following fields/callbacks (see
miiphy.h for details):
char name[] - The symbolic name that must be equal to the MII bus
registered name
int (*init)() - Initialization function called at startup time (just
before the Ethernet initialization)
int (*mdio_active)() - Activate the MDIO pin as output
int (*mdio_tristate)() - Activate the MDIO pin as input/tristate pin
int (*set_mdio)() - Write the MDIO pin
int (*get_mdio)() - Read the MDIO pin
int (*set_mdc)() - Write the MDC pin
int (*delay)() - Delay function
void *priv - Private data used by board specific code
The board code will look like:
struct bb_miiphy_bus bb_miiphy_buses[] = {
{ .name = miibus#1, .init = b1_init, .mdio_active = b1_mdio_active, ... },
{ .name = miibus#2, .init = b2_init, .mdio_active = b2_mdio_active, ... },
...
int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
sizeof(bb_miiphy_buses[0]);
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
199 lines
6 KiB
C
199 lines
6 KiB
C
/*----------------------------------------------------------------------------+
|
|
| This source code is dual-licensed. You may use it under the terms of the
|
|
| GNU General Public License version 2, or under the license below.
|
|
|
|
|
| This source code has been made available to you by IBM on an AS-IS
|
|
| basis. Anyone receiving this source is licensed under IBM
|
|
| copyrights to use it in any way he or she deems fit, including
|
|
| copying it, modifying it, compiling it, and redistributing it either
|
|
| with or without modifications. No license under IBM patents or
|
|
| patent applications is to be implied by the copyright license.
|
|
|
|
|
| Any user of this software should understand that IBM cannot provide
|
|
| technical support for this software and will not be responsible for
|
|
| any consequences resulting from the use of this software.
|
|
|
|
|
| Any person who transfers this source code or any derivative work
|
|
| must include the IBM copyright notice, this paragraph, and the
|
|
| preceding two paragraphs in the transferred software.
|
|
|
|
|
| COPYRIGHT I B M CORPORATION 1999
|
|
| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
|
|
|
|
|
| Additions (C) Copyright 2009 Industrie Dial Face S.p.A.
|
|
+----------------------------------------------------------------------------*/
|
|
/*----------------------------------------------------------------------------+
|
|
|
|
|
| File Name: miiphy.h
|
|
|
|
|
| Function: Include file defining PHY registers.
|
|
|
|
|
| Author: Mark Wisner
|
|
|
|
|
+----------------------------------------------------------------------------*/
|
|
#ifndef _miiphy_h_
|
|
#define _miiphy_h_
|
|
|
|
#include <net.h>
|
|
|
|
int miiphy_read (char *devname, unsigned char addr, unsigned char reg,
|
|
unsigned short *value);
|
|
int miiphy_write (char *devname, unsigned char addr, unsigned char reg,
|
|
unsigned short value);
|
|
int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
|
|
unsigned char *model, unsigned char *rev);
|
|
int miiphy_reset (char *devname, unsigned char addr);
|
|
int miiphy_speed (char *devname, unsigned char addr);
|
|
int miiphy_duplex (char *devname, unsigned char addr);
|
|
int miiphy_is_1000base_x (char *devname, unsigned char addr);
|
|
#ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
|
int miiphy_link (char *devname, unsigned char addr);
|
|
#endif
|
|
|
|
void miiphy_init (void);
|
|
|
|
void miiphy_register (char *devname,
|
|
int (*read) (char *devname, unsigned char addr,
|
|
unsigned char reg, unsigned short *value),
|
|
int (*write) (char *devname, unsigned char addr,
|
|
unsigned char reg, unsigned short value));
|
|
|
|
int miiphy_set_current_dev (char *devname);
|
|
char *miiphy_get_current_dev (void);
|
|
|
|
void miiphy_listdev (void);
|
|
|
|
#ifdef CONFIG_BITBANGMII
|
|
|
|
#define BB_MII_DEVNAME "bb_miiphy"
|
|
|
|
struct bb_miiphy_bus {
|
|
char name[NAMESIZE];
|
|
int (*init)(struct bb_miiphy_bus *bus);
|
|
int (*mdio_active)(struct bb_miiphy_bus *bus);
|
|
int (*mdio_tristate)(struct bb_miiphy_bus *bus);
|
|
int (*set_mdio)(struct bb_miiphy_bus *bus, int v);
|
|
int (*get_mdio)(struct bb_miiphy_bus *bus, int *v);
|
|
int (*set_mdc)(struct bb_miiphy_bus *bus, int v);
|
|
int (*delay)(struct bb_miiphy_bus *bus);
|
|
#ifdef CONFIG_BITBANGMII_MULTI
|
|
void *priv;
|
|
#endif
|
|
};
|
|
|
|
extern struct bb_miiphy_bus bb_miiphy_buses[];
|
|
extern int bb_miiphy_buses_num;
|
|
|
|
void bb_miiphy_init (void);
|
|
int bb_miiphy_read (char *devname, unsigned char addr,
|
|
unsigned char reg, unsigned short *value);
|
|
int bb_miiphy_write (char *devname, unsigned char addr,
|
|
unsigned char reg, unsigned short value);
|
|
#endif
|
|
|
|
/* phy seed setup */
|
|
#define AUTO 99
|
|
#define _1000BASET 1000
|
|
#define _100BASET 100
|
|
#define _10BASET 10
|
|
#define HALF 22
|
|
#define FULL 44
|
|
|
|
/* phy register offsets */
|
|
#define PHY_BMCR 0x00
|
|
#define PHY_BMSR 0x01
|
|
#define PHY_PHYIDR1 0x02
|
|
#define PHY_PHYIDR2 0x03
|
|
#define PHY_ANAR 0x04
|
|
#define PHY_ANLPAR 0x05
|
|
#define PHY_ANER 0x06
|
|
#define PHY_ANNPTR 0x07
|
|
#define PHY_ANLPNP 0x08
|
|
#define PHY_1000BTCR 0x09
|
|
#define PHY_1000BTSR 0x0A
|
|
#define PHY_EXSR 0x0F
|
|
#define PHY_PHYSTS 0x10
|
|
#define PHY_MIPSCR 0x11
|
|
#define PHY_MIPGSR 0x12
|
|
#define PHY_DCR 0x13
|
|
#define PHY_FCSCR 0x14
|
|
#define PHY_RECR 0x15
|
|
#define PHY_PCSR 0x16
|
|
#define PHY_LBR 0x17
|
|
#define PHY_10BTSCR 0x18
|
|
#define PHY_PHYCTRL 0x19
|
|
|
|
/* PHY BMCR */
|
|
#define PHY_BMCR_RESET 0x8000
|
|
#define PHY_BMCR_LOOP 0x4000
|
|
#define PHY_BMCR_100MB 0x2000
|
|
#define PHY_BMCR_AUTON 0x1000
|
|
#define PHY_BMCR_POWD 0x0800
|
|
#define PHY_BMCR_ISO 0x0400
|
|
#define PHY_BMCR_RST_NEG 0x0200
|
|
#define PHY_BMCR_DPLX 0x0100
|
|
#define PHY_BMCR_COL_TST 0x0080
|
|
|
|
#define PHY_BMCR_SPEED_MASK 0x2040
|
|
#define PHY_BMCR_1000_MBPS 0x0040
|
|
#define PHY_BMCR_100_MBPS 0x2000
|
|
#define PHY_BMCR_10_MBPS 0x0000
|
|
|
|
/* phy BMSR */
|
|
#define PHY_BMSR_100T4 0x8000
|
|
#define PHY_BMSR_100TXF 0x4000
|
|
#define PHY_BMSR_100TXH 0x2000
|
|
#define PHY_BMSR_10TF 0x1000
|
|
#define PHY_BMSR_10TH 0x0800
|
|
#define PHY_BMSR_EXT_STAT 0x0100
|
|
#define PHY_BMSR_PRE_SUP 0x0040
|
|
#define PHY_BMSR_AUTN_COMP 0x0020
|
|
#define PHY_BMSR_RF 0x0010
|
|
#define PHY_BMSR_AUTN_ABLE 0x0008
|
|
#define PHY_BMSR_LS 0x0004
|
|
#define PHY_BMSR_JD 0x0002
|
|
#define PHY_BMSR_EXT 0x0001
|
|
|
|
/*phy ANLPAR */
|
|
#define PHY_ANLPAR_NP 0x8000
|
|
#define PHY_ANLPAR_ACK 0x4000
|
|
#define PHY_ANLPAR_RF 0x2000
|
|
#define PHY_ANLPAR_ASYMP 0x0800
|
|
#define PHY_ANLPAR_PAUSE 0x0400
|
|
#define PHY_ANLPAR_T4 0x0200
|
|
#define PHY_ANLPAR_TXFD 0x0100
|
|
#define PHY_ANLPAR_TX 0x0080
|
|
#define PHY_ANLPAR_10FD 0x0040
|
|
#define PHY_ANLPAR_10 0x0020
|
|
#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */
|
|
/* phy ANLPAR 1000BASE-X */
|
|
#define PHY_X_ANLPAR_NP 0x8000
|
|
#define PHY_X_ANLPAR_ACK 0x4000
|
|
#define PHY_X_ANLPAR_RF_MASK 0x3000
|
|
#define PHY_X_ANLPAR_PAUSE_MASK 0x0180
|
|
#define PHY_X_ANLPAR_HD 0x0040
|
|
#define PHY_X_ANLPAR_FD 0x0020
|
|
|
|
#define PHY_ANLPAR_PSB_MASK 0x001f
|
|
#define PHY_ANLPAR_PSB_802_3 0x0001
|
|
#define PHY_ANLPAR_PSB_802_9 0x0002
|
|
|
|
/* phy 1000BTCR */
|
|
#define PHY_1000BTCR_1000FD 0x0200
|
|
#define PHY_1000BTCR_1000HD 0x0100
|
|
|
|
/* phy 1000BTSR */
|
|
#define PHY_1000BTSR_MSCF 0x8000
|
|
#define PHY_1000BTSR_MSCR 0x4000
|
|
#define PHY_1000BTSR_LRS 0x2000
|
|
#define PHY_1000BTSR_RRS 0x1000
|
|
#define PHY_1000BTSR_1000FD 0x0800
|
|
#define PHY_1000BTSR_1000HD 0x0400
|
|
|
|
/* phy EXSR */
|
|
#define PHY_EXSR_1000XF 0x8000
|
|
#define PHY_EXSR_1000XH 0x4000
|
|
#define PHY_EXSR_1000TF 0x2000
|
|
#define PHY_EXSR_1000TH 0x1000
|
|
|
|
#endif
|