mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
f6b690e65c
The new Atmel SoC (at91sam9x5 series and at91sam9n12) add a totally different LCD controller. Add this new driver to support it. Using CONFIG_ATMEL_HLCD (distinguish with CONFIG_ATMEL_LCD) to enable this in board configuration file. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
211 lines
6.1 KiB
C
211 lines
6.1 KiB
C
/*
|
|
* Driver for AT91/AT32 MULTI LAYER LCD Controller
|
|
*
|
|
* Copyright (C) 2012 Atmel Corporation
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <lcd.h>
|
|
#include <atmel_hlcdc.h>
|
|
|
|
int lcd_line_length;
|
|
int lcd_color_fg;
|
|
int lcd_color_bg;
|
|
|
|
void *lcd_base; /* Start of framebuffer memory */
|
|
void *lcd_console_address; /* Start of console buffer */
|
|
|
|
short console_col;
|
|
short console_row;
|
|
|
|
/* configurable parameters */
|
|
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
|
|
#define ATMEL_LCDC_DMA_BURST_LEN 8
|
|
#ifndef ATMEL_LCDC_GUARD_TIME
|
|
#define ATMEL_LCDC_GUARD_TIME 1
|
|
#endif
|
|
|
|
#define ATMEL_LCDC_FIFO_SIZE 512
|
|
|
|
#define lcdc_readl(reg) __raw_readl((reg))
|
|
#define lcdc_writel(reg, val) __raw_writel((val), (reg))
|
|
|
|
void lcd_ctrl_init(void *lcdbase)
|
|
{
|
|
unsigned long value;
|
|
struct lcd_dma_desc *desc;
|
|
struct atmel_hlcd_regs *regs;
|
|
|
|
if (!has_lcdc())
|
|
return; /* No lcdc */
|
|
|
|
regs = (struct atmel_hlcd_regs *)panel_info.mmio;
|
|
|
|
/* Disable DISP signal */
|
|
lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_DISPDIS);
|
|
while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
|
|
udelay(1);
|
|
/* Disable synchronization */
|
|
lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_SYNCDIS);
|
|
while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
|
|
udelay(1);
|
|
/* Disable pixel clock */
|
|
lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_CLKDIS);
|
|
while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
|
|
udelay(1);
|
|
/* Disable PWM */
|
|
lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_PWMDIS);
|
|
while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
|
|
udelay(1);
|
|
|
|
/* Set pixel clock */
|
|
value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
|
|
if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
|
|
value++;
|
|
|
|
if (value < 1) {
|
|
/* Using system clock as pixel clock */
|
|
lcdc_writel(®s->lcdc_lcdcfg0,
|
|
LCDC_LCDCFG0_CLKDIV(0)
|
|
| LCDC_LCDCFG0_CGDISHCR
|
|
| LCDC_LCDCFG0_CGDISHEO
|
|
| LCDC_LCDCFG0_CGDISOVR1
|
|
| LCDC_LCDCFG0_CGDISBASE
|
|
| panel_info.vl_clk_pol
|
|
| LCDC_LCDCFG0_CLKSEL);
|
|
|
|
} else {
|
|
lcdc_writel(®s->lcdc_lcdcfg0,
|
|
LCDC_LCDCFG0_CLKDIV(value - 2)
|
|
| LCDC_LCDCFG0_CGDISHCR
|
|
| LCDC_LCDCFG0_CGDISHEO
|
|
| LCDC_LCDCFG0_CGDISOVR1
|
|
| LCDC_LCDCFG0_CGDISBASE
|
|
| panel_info.vl_clk_pol);
|
|
}
|
|
|
|
/* Initialize control register 5 */
|
|
value = 0;
|
|
|
|
value |= panel_info.vl_sync;
|
|
|
|
#ifndef LCD_OUTPUT_BPP
|
|
/* Output is 24bpp */
|
|
value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
|
|
#else
|
|
switch (LCD_OUTPUT_BPP) {
|
|
case 12:
|
|
value |= LCDC_LCDCFG5_MODE_OUTPUT_12BPP;
|
|
break;
|
|
case 16:
|
|
value |= LCDC_LCDCFG5_MODE_OUTPUT_16BPP;
|
|
break;
|
|
case 18:
|
|
value |= LCDC_LCDCFG5_MODE_OUTPUT_18BPP;
|
|
break;
|
|
case 24:
|
|
value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
value |= LCDC_LCDCFG5_GUARDTIME(ATMEL_LCDC_GUARD_TIME);
|
|
value |= (LCDC_LCDCFG5_DISPDLY | LCDC_LCDCFG5_VSPDLYS);
|
|
lcdc_writel(®s->lcdc_lcdcfg5, value);
|
|
|
|
/* Vertical & Horizontal Timing */
|
|
value = LCDC_LCDCFG1_VSPW(panel_info.vl_vsync_len - 1);
|
|
value |= LCDC_LCDCFG1_HSPW(panel_info.vl_hsync_len - 1);
|
|
lcdc_writel(®s->lcdc_lcdcfg1, value);
|
|
|
|
value = LCDC_LCDCFG2_VBPW(panel_info.vl_lower_margin);
|
|
value |= LCDC_LCDCFG2_VFPW(panel_info.vl_upper_margin - 1);
|
|
lcdc_writel(®s->lcdc_lcdcfg2, value);
|
|
|
|
value = LCDC_LCDCFG3_HBPW(panel_info.vl_right_margin - 1);
|
|
value |= LCDC_LCDCFG3_HFPW(panel_info.vl_left_margin - 1);
|
|
lcdc_writel(®s->lcdc_lcdcfg3, value);
|
|
|
|
/* Display size */
|
|
value = LCDC_LCDCFG4_RPF(panel_info.vl_row - 1);
|
|
value |= LCDC_LCDCFG4_PPL(panel_info.vl_col - 1);
|
|
lcdc_writel(®s->lcdc_lcdcfg4, value);
|
|
|
|
lcdc_writel(®s->lcdc_basecfg0,
|
|
LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO);
|
|
|
|
switch (NBITS(panel_info.vl_bpix)) {
|
|
case 16:
|
|
lcdc_writel(®s->lcdc_basecfg1,
|
|
LCDC_BASECFG1_RGBMODE_16BPP_RGB_565);
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
lcdc_writel(®s->lcdc_basecfg2, LCDC_BASECFG2_XSTRIDE(0));
|
|
lcdc_writel(®s->lcdc_basecfg3, 0);
|
|
lcdc_writel(®s->lcdc_basecfg4, LCDC_BASECFG4_DMA);
|
|
|
|
/* Disable all interrupts */
|
|
lcdc_writel(®s->lcdc_lcdidr, ~0UL);
|
|
lcdc_writel(®s->lcdc_baseidr, ~0UL);
|
|
|
|
/* Setup the DMA descriptor, this descriptor will loop to itself */
|
|
desc = (struct lcd_dma_desc *)(lcdbase - 16);
|
|
|
|
desc->address = (u32)lcdbase;
|
|
/* Disable DMA transfer interrupt & descriptor loaded interrupt. */
|
|
desc->control = LCDC_BASECTRL_ADDIEN | LCDC_BASECTRL_DSCRIEN
|
|
| LCDC_BASECTRL_DMAIEN | LCDC_BASECTRL_DFETCH;
|
|
desc->next = (u32)desc;
|
|
|
|
lcdc_writel(®s->lcdc_baseaddr, desc->address);
|
|
lcdc_writel(®s->lcdc_basectrl, desc->control);
|
|
lcdc_writel(®s->lcdc_basenext, desc->next);
|
|
lcdc_writel(®s->lcdc_basecher, LCDC_BASECHER_CHEN |
|
|
LCDC_BASECHER_UPDATEEN);
|
|
|
|
/* Enable LCD */
|
|
value = lcdc_readl(®s->lcdc_lcden);
|
|
lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_CLKEN);
|
|
while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
|
|
udelay(1);
|
|
value = lcdc_readl(®s->lcdc_lcden);
|
|
lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_SYNCEN);
|
|
while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
|
|
udelay(1);
|
|
value = lcdc_readl(®s->lcdc_lcden);
|
|
lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_DISPEN);
|
|
while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
|
|
udelay(1);
|
|
value = lcdc_readl(®s->lcdc_lcden);
|
|
lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_PWMEN);
|
|
while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
|
|
udelay(1);
|
|
}
|