u-boot/include/da9030.h
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

102 lines
2.8 KiB
C

/*
* (C) Copyright 2006 DENX Software Engineering
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* DA9030 register definitions */
#define CID 0x00
#define EVENT_A 0x01
#define EVENT_B 0x02
#define EVENT_C 0x03
#define STATUS 0x04
#define IRQ_MASK_A 0x05
#define IRQ_MASK_B 0x06
#define IRQ_MASK_C 0x07
#define SYS_CONTROL_A 0x08
#define SYS_CONTROL_B 0x09
#define FAULT_LOG 0x0A
#define LDO_10_11 0x10
#define LDO_15 0x11
#define LDO_14_16 0x12
#define LDO_18_19 0x13
#define LDO_17_SIMCP0 0x14
#define BUCK2_DVC1 0x15
#define BUCK2_DVC2 0x16
#define REG_CONTROL_1_17 0x17
#define REG_CONTROL_2_18 0x18
#define USBPUMP 0x19
#define SLEEP_CONTROL 0x1A
#define STARTUP_CONTROL 0x1B
#define LED1_CONTROL 0x20
#define LED2_CONTROL 0x21
#define LED3_CONTROL 0x22
#define LED4_CONTROL 0x23
#define LEDPC_CONTROL 0x24
#define WLED_CONTROL 0x25
#define MISC_CONTROLA 0x26
#define MISC_CONTROLB 0x27
#define CHARGE_CONTROL 0x28
#define CCTR_CONTROL 0x29
#define TCTR_CONTROL 0x2A
#define CHARGE_PULSE 0x2B
/* ... some missing ...*/
#define LDO1 0x90
#define LDO2_3 0x91
#define LDO4_5 0x92
#define LDO6_SIMCP 0x93
#define LDO7_8 0x94
#define LDO9_12 0x95
#define BUCK 0x96
#define REG_CONTROL_1_97 0x97
#define REG_CONTROL_2_98 0x98
#define REG_SLEEP_CONTROL1 0x99
#define REG_SLEEP_CONTROL2 0x9A
#define REG_SLEEP_CONTROL3 0x9B
#define ADC_MAN_CONTROL 0xA0
#define ADC_AUTO_CONTROL 0xA1
#define VBATMON 0xA2
#define VBATMONTXMON 0xA3
#define TBATHIGHP 0xA4
#define TBATHIGHN 0xA5
#define TBATLOW 0xA6
#define MAN_RES 0xB0
#define VBAT_RES 0xB1
#define VBATMIN_RES 0xB2
#define VBATMINTXON_RES 0xB3
#define ICHMAX_RES 0xB4
#define ICHMIN_RES 0xB5
#define ICHAVERAGE_RES 0xB6
#define VCHMAX_RES 0xB7
#define VCHMIN_RES 0xB8
#define TBAT_RES 0xB9
#define ADC_IN4_RES 0xBA
#define STATUS_ONKEY_N 0x1 /* current ONKEY_N value */
#define STATUS_PWREN1 (1<<1) /* PWREN1 value */
#define STATUS_EXTON (1<<2) /* EXTON value */
#define STATUS_CHDET (1<<3) /* Charger detection status */
#define STATUS_TBAT (1<<4) /* Battery over/under temperature status */
#define STATUS_VBATMON (1<<5) /* VBATMON comparison status */
#define STATUS_VBATMONTXON (1<<6) /* VBATMONTXON comparison status */
#define STATUS_CHIOVER (1<<7) /* Charge overcurrent */
#define SYS_CONTROL_A_SLEEP_N_PIN_ENABLE 0x1
#define SYS_CONTROL_A_SHUT_DOWN (1<<1)
#define SYS_CONTROL_A_HWRES_ENABLE (1<<2)
#define SYS_CONTROL_A_WDOG_ACTION (1<<3)
#define SYS_CONTROL_A_WATCHDOG (1<<7)
#define MISC_CONTROLB_USB_INT_RISING (1<<2)
#define MISC_CONTROLB_SESSION_VALID_EN (1<<3)
#define USB_PUMP_USBVE (1<<0)
#define USB_PUMP_USBVEP (1<<1)
#define USB_PUMP_SRP_DETECT (1<<2)
#define USB_PUMP_SESSION_VALID (1<<3)
#define USB_PUMP_VBUS_VALID_4_0 (1<<4)
#define USB_PUMP_VBUS_VALID_4_4 (1<<5)
#define USB_PUMP_EN_USBVE (1<<6)
#define USB_PUMP_EN_USBVEP (1<<7)