mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 06:12:58 +00:00
42f67fb51c
The boot source node path for emmc is using the old sdhci name.
Replace with correct mmc name and also add same-as-spl to boot order.
Fixes: 0d61f8e5f1 ("rockchip: rk3568: add boot device detection")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
137 lines
3.6 KiB
C
137 lines
3.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2021 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/armv8/mmu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/bootrom.h>
|
|
#include <asm/arch-rockchip/grf_rk3568.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <dt-bindings/clock/rk3568-cru.h>
|
|
|
|
#define PMUGRF_BASE 0xfdc20000
|
|
#define GRF_BASE 0xfdc60000
|
|
#define GRF_GPIO1B_DS_2 0x218
|
|
#define GRF_GPIO1B_DS_3 0x21c
|
|
#define GRF_GPIO1C_DS_0 0x220
|
|
#define GRF_GPIO1C_DS_1 0x224
|
|
#define GRF_GPIO1C_DS_2 0x228
|
|
#define GRF_GPIO1C_DS_3 0x22c
|
|
#define SGRF_BASE 0xFDD18000
|
|
#define SGRF_SOC_CON4 0x10
|
|
#define EMMC_HPROT_SECURE_CTRL 0x03
|
|
#define SDMMC0_HPROT_SECURE_CTRL 0x01
|
|
|
|
#define PMU_BASE_ADDR 0xfdd90000
|
|
#define PMU_NOC_AUTO_CON0 (0x70)
|
|
#define PMU_NOC_AUTO_CON1 (0x74)
|
|
#define EDP_PHY_GRF_BASE 0xfdcb0000
|
|
#define EDP_PHY_GRF_CON0 (EDP_PHY_GRF_BASE + 0x00)
|
|
#define EDP_PHY_GRF_CON10 (EDP_PHY_GRF_BASE + 0x28)
|
|
#define CPU_GRF_BASE 0xfdc30000
|
|
#define GRF_CORE_PVTPLL_CON0 (0x10)
|
|
|
|
/* PMU_GRF_GPIO0D_IOMUX_L */
|
|
enum {
|
|
GPIO0D1_SHIFT = 4,
|
|
GPIO0D1_MASK = GENMASK(6, 4),
|
|
GPIO0D1_GPIO = 0,
|
|
GPIO0D1_UART2_TXM0,
|
|
|
|
GPIO0D0_SHIFT = 0,
|
|
GPIO0D0_MASK = GENMASK(2, 0),
|
|
GPIO0D0_GPIO = 0,
|
|
GPIO0D0_UART2_RXM0,
|
|
};
|
|
|
|
/* GRF_IOFUNC_SEL3 */
|
|
enum {
|
|
UART2_IO_SEL_SHIFT = 10,
|
|
UART2_IO_SEL_MASK = GENMASK(11, 10),
|
|
UART2_IO_SEL_M0 = 0,
|
|
};
|
|
|
|
static struct mm_region rk3568_mem_map[] = {
|
|
{
|
|
.virt = 0x0UL,
|
|
.phys = 0x0UL,
|
|
.size = 0xf0000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_INNER_SHARE
|
|
}, {
|
|
.virt = 0xf0000000UL,
|
|
.phys = 0xf0000000UL,
|
|
.size = 0x10000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
.virt = 0x300000000,
|
|
.phys = 0x300000000,
|
|
.size = 0x0c0c00000,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* List terminator */
|
|
0,
|
|
}
|
|
};
|
|
|
|
const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
|
|
[BROM_BOOTSOURCE_EMMC] = "/mmc@fe310000",
|
|
[BROM_BOOTSOURCE_SPINOR] = "/spi@fe300000/flash@0",
|
|
[BROM_BOOTSOURCE_SD] = "/mmc@fe2b0000",
|
|
};
|
|
|
|
struct mm_region *mem_map = rk3568_mem_map;
|
|
|
|
void board_debug_uart_init(void)
|
|
{
|
|
static struct rk3568_pmugrf * const pmugrf = (void *)PMUGRF_BASE;
|
|
static struct rk3568_grf * const grf = (void *)GRF_BASE;
|
|
|
|
/* UART2 M0 */
|
|
rk_clrsetreg(&grf->iofunc_sel3, UART2_IO_SEL_MASK,
|
|
UART2_IO_SEL_M0 << UART2_IO_SEL_SHIFT);
|
|
|
|
/* Switch iomux */
|
|
rk_clrsetreg(&pmugrf->pmu_gpio0d_iomux_l,
|
|
GPIO0D1_MASK | GPIO0D0_MASK,
|
|
GPIO0D1_UART2_TXM0 << GPIO0D1_SHIFT |
|
|
GPIO0D0_UART2_RXM0 << GPIO0D0_SHIFT);
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/*
|
|
* When perform idle operation, corresponding clock can
|
|
* be opened or gated automatically.
|
|
*/
|
|
writel(0xffffffff, PMU_BASE_ADDR + PMU_NOC_AUTO_CON0);
|
|
writel(0x000f000f, PMU_BASE_ADDR + PMU_NOC_AUTO_CON1);
|
|
|
|
/* Disable eDP phy by default */
|
|
writel(0x00070007, EDP_PHY_GRF_CON10);
|
|
writel(0x0ff10ff1, EDP_PHY_GRF_CON0);
|
|
|
|
/* Set core pvtpll ring length */
|
|
writel(0x00ff002b, CPU_GRF_BASE + GRF_CORE_PVTPLL_CON0);
|
|
|
|
/* Set the emmc sdmmc0 to secure */
|
|
rk_clrreg(SGRF_BASE + SGRF_SOC_CON4, (EMMC_HPROT_SECURE_CTRL << 11
|
|
| SDMMC0_HPROT_SECURE_CTRL << 4));
|
|
/* set the emmc driver strength to level 2 */
|
|
writel(0x3f3f0707, GRF_BASE + GRF_GPIO1B_DS_2);
|
|
writel(0x3f3f0707, GRF_BASE + GRF_GPIO1B_DS_3);
|
|
writel(0x3f3f0707, GRF_BASE + GRF_GPIO1C_DS_0);
|
|
writel(0x3f3f0707, GRF_BASE + GRF_GPIO1C_DS_1);
|
|
writel(0x3f3f0707, GRF_BASE + GRF_GPIO1C_DS_2);
|
|
writel(0x3f3f0707, GRF_BASE + GRF_GPIO1C_DS_3);
|
|
#endif
|
|
return 0;
|
|
}
|