mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
5d88902401
The EFI subsystem accesses the real time clock and is enabled by default. So we should drop any CONFIG_CMD_DATE dependency from the real time clock drivers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
222 lines
4.6 KiB
C
222 lines
4.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2009-2012 ADVANSEE
|
|
* Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
|
|
*
|
|
* Based on the Linux rtc-imxdi.c driver, which is:
|
|
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
* Copyright 2010 Orex Computed Radiography
|
|
*/
|
|
|
|
/*
|
|
* Date & Time support for Freescale i.MX DryIce RTC
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <linux/compat.h>
|
|
#include <rtc.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
/* DryIce Register Definitions */
|
|
|
|
struct imxdi_regs {
|
|
u32 dtcmr; /* Time Counter MSB Reg */
|
|
u32 dtclr; /* Time Counter LSB Reg */
|
|
u32 dcamr; /* Clock Alarm MSB Reg */
|
|
u32 dcalr; /* Clock Alarm LSB Reg */
|
|
u32 dcr; /* Control Reg */
|
|
u32 dsr; /* Status Reg */
|
|
u32 dier; /* Interrupt Enable Reg */
|
|
};
|
|
|
|
#define DCAMR_UNSET 0xFFFFFFFF /* doomsday - 1 sec */
|
|
|
|
#define DCR_TCE (1 << 3) /* Time Counter Enable */
|
|
|
|
#define DSR_WBF (1 << 10) /* Write Busy Flag */
|
|
#define DSR_WNF (1 << 9) /* Write Next Flag */
|
|
#define DSR_WCF (1 << 8) /* Write Complete Flag */
|
|
#define DSR_WEF (1 << 7) /* Write Error Flag */
|
|
#define DSR_CAF (1 << 4) /* Clock Alarm Flag */
|
|
#define DSR_NVF (1 << 1) /* Non-Valid Flag */
|
|
#define DSR_SVF (1 << 0) /* Security Violation Flag */
|
|
|
|
#define DIER_WNIE (1 << 9) /* Write Next Interrupt Enable */
|
|
#define DIER_WCIE (1 << 8) /* Write Complete Interrupt Enable */
|
|
#define DIER_WEIE (1 << 7) /* Write Error Interrupt Enable */
|
|
#define DIER_CAIE (1 << 4) /* Clock Alarm Interrupt Enable */
|
|
|
|
/* Driver Private Data */
|
|
|
|
struct imxdi_data {
|
|
struct imxdi_regs __iomem *regs;
|
|
int init_done;
|
|
};
|
|
|
|
static struct imxdi_data data;
|
|
|
|
/*
|
|
* This function attempts to clear the dryice write-error flag.
|
|
*
|
|
* A dryice write error is similar to a bus fault and should not occur in
|
|
* normal operation. Clearing the flag requires another write, so the root
|
|
* cause of the problem may need to be fixed before the flag can be cleared.
|
|
*/
|
|
static void clear_write_error(void)
|
|
{
|
|
int cnt;
|
|
|
|
puts("### Warning: RTC - Register write error!\n");
|
|
|
|
/* clear the write error flag */
|
|
__raw_writel(DSR_WEF, &data.regs->dsr);
|
|
|
|
/* wait for it to take effect */
|
|
for (cnt = 0; cnt < 1000; cnt++) {
|
|
if ((__raw_readl(&data.regs->dsr) & DSR_WEF) == 0)
|
|
return;
|
|
udelay(10);
|
|
}
|
|
puts("### Error: RTC - Cannot clear write-error flag!\n");
|
|
}
|
|
|
|
/*
|
|
* Write a dryice register and wait until it completes.
|
|
*
|
|
* Use interrupt flags to determine when the write has completed.
|
|
*/
|
|
#define DI_WRITE_WAIT(val, reg) \
|
|
( \
|
|
/* do the register write */ \
|
|
__raw_writel((val), &data.regs->reg), \
|
|
\
|
|
di_write_wait((val), #reg) \
|
|
)
|
|
static int di_write_wait(u32 val, const char *reg)
|
|
{
|
|
int cnt;
|
|
int ret = 0;
|
|
int rc = 0;
|
|
|
|
/* wait for the write to finish */
|
|
for (cnt = 0; cnt < 100; cnt++) {
|
|
if ((__raw_readl(&data.regs->dsr) & (DSR_WCF | DSR_WEF)) != 0) {
|
|
ret = 1;
|
|
break;
|
|
}
|
|
udelay(10);
|
|
}
|
|
if (ret == 0)
|
|
printf("### Warning: RTC - Write-wait timeout "
|
|
"val = 0x%.8x reg = %s\n", val, reg);
|
|
|
|
/* check for write error */
|
|
if (__raw_readl(&data.regs->dsr) & DSR_WEF) {
|
|
clear_write_error();
|
|
rc = -1;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Initialize dryice hardware
|
|
*/
|
|
static int di_init(void)
|
|
{
|
|
int rc = 0;
|
|
|
|
data.regs = (struct imxdi_regs __iomem *)IMX_DRYICE_BASE;
|
|
|
|
/* mask all interrupts */
|
|
__raw_writel(0, &data.regs->dier);
|
|
|
|
/* put dryice into valid state */
|
|
if (__raw_readl(&data.regs->dsr) & DSR_NVF) {
|
|
rc = DI_WRITE_WAIT(DSR_NVF | DSR_SVF, dsr);
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
/* initialize alarm */
|
|
rc = DI_WRITE_WAIT(DCAMR_UNSET, dcamr);
|
|
if (rc)
|
|
goto err;
|
|
rc = DI_WRITE_WAIT(0, dcalr);
|
|
if (rc)
|
|
goto err;
|
|
|
|
/* clear alarm flag */
|
|
if (__raw_readl(&data.regs->dsr) & DSR_CAF) {
|
|
rc = DI_WRITE_WAIT(DSR_CAF, dsr);
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
/* the timer won't count if it has never been written to */
|
|
if (__raw_readl(&data.regs->dtcmr) == 0) {
|
|
rc = DI_WRITE_WAIT(0, dtcmr);
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
/* start keeping time */
|
|
if (!(__raw_readl(&data.regs->dcr) & DCR_TCE)) {
|
|
rc = DI_WRITE_WAIT(__raw_readl(&data.regs->dcr) | DCR_TCE, dcr);
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
data.init_done = 1;
|
|
return 0;
|
|
|
|
err:
|
|
return rc;
|
|
}
|
|
|
|
int rtc_get(struct rtc_time *tmp)
|
|
{
|
|
unsigned long now;
|
|
int rc = 0;
|
|
|
|
if (!data.init_done) {
|
|
rc = di_init();
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
now = __raw_readl(&data.regs->dtcmr);
|
|
rtc_to_tm(now, tmp);
|
|
|
|
err:
|
|
return rc;
|
|
}
|
|
|
|
int rtc_set(struct rtc_time *tmp)
|
|
{
|
|
unsigned long now;
|
|
int rc;
|
|
|
|
if (!data.init_done) {
|
|
rc = di_init();
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
now = rtc_mktime(tmp);
|
|
/* zero the fractional part first */
|
|
rc = DI_WRITE_WAIT(0, dtclr);
|
|
if (rc == 0)
|
|
rc = DI_WRITE_WAIT(now, dtcmr);
|
|
|
|
err:
|
|
return rc;
|
|
}
|
|
|
|
void rtc_reset(void)
|
|
{
|
|
di_init();
|
|
}
|